MIL-DTL-38999 Hermetic Connectors D38999/23 Jam Nut Mount Hermetic Receptacle MIL-DTL-38999 Series III How To Order: MS B Connector Material / Finish N - CRES, Nickel Y - CRES, Passivated Basic Specification D38999 D38999 /23 Shell Style Y A B C D E /23 - Jam Nut Mount B 35 P J H Panel Thickness Socket Face N Contact Termination P - Pin, Solder Cup S - Socket, Solder Cup X - Pin, Eyelet Z - Socket, Eyelet C - Pin, PCB D - Socket, PCB Flex Feedthrough Flex Feedthrough Shell Size - 9 F - 19 - 11 G - 21 - 13 H - 23 - 15 J - 25 - 17 Non-Environmental Rear Accessory Thread Adapter Available for this Receptacle See P/N 980-002 on Page B-90 L Max .889 Max Alternate Key Position A, B, C, D, E (N = Normal) Insert Arrangement Per MIL-STD-1560; See Pages B2 - B4 O-Ring Solder Cup Contact (P & S) TABLE ll: CONTACT SIZE Eyelet Contact (X & Z) Feedthrough Contact (C & D) PRINTED CIRCUIT TAIL CONFIGURATIONS CONTACT STYLE C AND D P E DIA D Flat P (See Table II) SIZE 12 AND SIZE 16 .050 ± .015 (1.27 ± 0.38) F DIA SIZE 22D AND SIZE 20 Pin Face A Thread .175/.125 G Thread Master Keyway B DIA 90°/85° Contact Size ø P 22D .011 (0.28) .015 (0.38) 20 .024 (0.61) .028 (0.71) 16 .0635 (1.61) .0615 (1.56) 12 .095 (2.41) .093 (2.36) M Max .358 Max Size 9-17 .382 Max Size 19-25 Nut Per D38999/28 P K DIA WIRE ACCOMODATION C C N Contact Size 22D 20 16 12 Wire Guage #22 - #28 #20 - #24 #16 - #20 #12 - #14 Recommended Panel Cut-Out Dimensions in Inches (millimeters) are subject to change without notice. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-50 E-Mail: [email protected]