OmniVision OV07695-A17A Automatic white balance (awb) Datasheet

OV7695 VGA product brief
lead free
available in
a lead-free
package
Ultra-Compact, Cost-Effective Secondary Camera
Solution for Smartphones and Tablets
The OV7695 is a high-performance CameraChip™
sensor that utilizes OmniVision's new OmniBSI+™
pixel architecture to deliver high quality VGA video at
30 frames per second. At just 2.4 x 2.3 mm, the costcompetitive OV7695 is a highly attractive solution for
front-facing cameras in smartphones and tablets.
The 1/13-inch VGA sensor is built on a 1.75-micron
OmniBSI+ pixel, which has a significantly lower level of
noise when compared with traditional FSI pixel
architectures. The result is a dramatic improvement in
dynamic range, which translates into higher quality color
video. Using proprietary technology to improve image
quality, the OV7695 reduces or eliminates common
sources of image contamination such as fixed pattern
noise and smearing to produce a clean, stable color
image.
The sensor provides full-framed, sub-sampled and
cropped images in YUV422 format via a one-lane MIPI
interface. All required image processing functions,
including exposure control, gamma, white balance, color
saturation, defective pixel canceling, and noise
canceling are programmable through the serial camera
control bus (SCCB) interface.
Find out more at www.ovt.com.
OV7695
Applications
¬ Cellular and Picture Phones
¬ Toys
¬ PC Multimedia
¬ Digital Video Cameras
¬ Tablets
Ordering Information
¬ OV07695-A17A
(color, lead-free, 17-pin CSP3)
Product Features
¬ support for image sizes:
- VGA (640x480)
- QVGA (320x240)
- QQVGA (160x120)
- HF (640x20)
¬ support for horizontal and
vertical sub-sampling
¬ automatic image control functions:
- automatic exposure control (AEC)
- automatic white balance (AWB)
- automatic black level calibration (ABLC)
Product Specifications
¬ on-chip phase lock loop (PLL)
¬ image quality controls: defect pixel
correction and lens shading correction
¬ built-in 1.5V regulator for digital block
¬ support for black sun cancellation
¬ capable of maintaining register values
at software power down
¬ standard serial SCCB interface
¬ power supply:
¬ maximum image transfer rate:
- core: 1.5V DC ±5% (internal regulator)
- VGA (640x480): 30 fps
- analog: 2.8V ±5%
- QVGA (320x240): 60 fps
- I/O: 2.8V, 1.8V
- QQVGA (160x120): 120 fps
- HF (640x20): 120 fps
¬ temperature range:
- operating: -30°C to 70°C junction
¬ sensitivity: 1000 mV/lux-sec
temperature
- stable image: 0°C to 50°C junction
¬ scan mode: progressive
temperature
¬ maximum exposure interval:
¬ output formats: YUV422
536 x tROW
¬ support for output formats:
YUV4:2:2 through MIPI
¬ programmable controls for frame rate,
mirror and flip, AEC/AGC,
and windowing
¬ active array size: 656 x 496
¬ parallel I/O tri-state configurability
and programmable polarity
¬ dynamic range: 69.2 dB @ 16x gain
¬ lens size: 1/13"
¬ pixel size: 1.75 µm x 1.75 µm
¬ lens chief ray angle: 26°
¬ image area: 1148 µm x 868 µm
¬ input clock frequency: 6 ~ 27 MHz
¬ package dimensions:
- CSP3: 2370 µm x 2300 µm
¬ max S/N ratio: 35.9 dB
Functional Block Diagram
OV7695
gain control
control register bank
4275 Burton Drive
Santa Clara, CA 95054
USA
Version 1.0, August, 2012
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
SDA
SCCB slave interface
SCL
FSIN
timing generator and system control logic
XSHUTDOWN
XVCLK
PLL
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo and VarioPixel are registered
trademarks of OmniVision Technologies, Inc. CameraChip, OmniBSI+ and OmniBSI are trademarks
of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
MIPI
FIFO
AMP
digital gain
10-bit
A/D
black level
calibration
row select
image
array
image output
interface
formatter
image
sensor
processor
DSP
image sensor core
column
sample/hold
MCN
MCP
MDN
MDP
Similar pages