AQF-30 SERIES AC/DC Power Module 30W FEATURES ►Fully encapsulated Plastic Case ►Single-, Dual- and Triple Output Models ►3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting ►Universal Input 85-264 VAC, 47- 440 Hz ►Protection Class ll ►Safety Approval to cUL/UL/IEC/EN 60950-1 ►UL508 Approval (Option) ►Over Load and Over Voltage Protection ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX AQF-30 series is a new range of fully encapsulated AC/DC power supply modules. The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AQF-30 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output (For model with Chassis Voltage Output Current Input Current Max. capacitive Efficiency 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) Load μF (typ.) @Max. Load % VDC Max. mA Peak mA AQF-30S05 5 6000 --- 557 60 8000 78 AQF-30S12 12 2500 --- 543 60 3900 80 AQF-30S15 15 2000 --- 543 60 3900 80 AQF-30S24 24 1250 --- 543 60 1500 80 AQF-30S48 48 625 --- 543 60 1000 80 AQF-30D12 ±12 ±1300 --- 565 60 #1500 80 AQF-30D15 ±15 ±1000 --- 543 60 #1500 80 572 60 572 60 572 60 572 60 588 60 483 60 Mounting, add suffix C) AQF-30D512 AQF-30T512 AQF-30T512A AQF-30T515 AQF-30T5312P AQF-30T3512P *5 3000 *12 1250 *5 3000 12 600 -12 -600 *5 3000 12 1000 -12 -250 *5 3000 15 500 -15 -500 *5 4500 +3.3 1000 +12 250 *3.3 4000 +5 1500 +12 250 * Output floating (note 6) E-mail:[email protected] 2012/11/14 REV:19 Tel:886-6-2923150 Page 1 of 5 4500 1800 4500 900 900 4500 1500 500 4500 750 750 6000 1500 500 5300 2000 500 3900 1500 2200 1500 1500 2200 1500 1500 2200 1500 1500 2200 2200 1500 2200 2200 1500 # For each output 76 76 76 76 71 71 AQF-30 SERIES AC/DC POWER MODULE 30W Input Specifications Parameter Input Voltage Range Input Frequency Range Input Voltage Range Model Min. 85 47 120 ----- All Models 115VAC 230VAC Inrush Current (Cold Start at 25℃) Typ. ----------- Max. 264 440 370 20 40 Unit VAC Hz VDC A A Output Specifications Parameter Conditions Single / Dual Output Output Voltage Accuracy Vo1 Vo2&Vo3 Dual Positive / Triple Output Line Regulation Load Regulation Iout=Min. to Max. Vo1 Vo2 Vo3 Cross RegulationDual / Triple Output Models Vin=Min. to Max. Single Output Models Dual Output Models Vo1 Triple Output Models Vo2&Vo3 Measured output Io = 20% to 100% of rated load Other output(s) set at 50% of rated load 3.3V & 5VDC Output Models Other Output Models Single-,Dual-Output Models and Main Output Triple Output Models Auxiliary Outputs of Triple Output Models Zener diode clamp Ripple & Noise (20MHz) Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Min. ------------------------------------- Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection Typ. ±1.0 ±1.0 ±3.0 ±0.2 ±0.5 ±2.5 ±2.5 ±4.0 ±2.0 ±5.0 ±5.0 1.5 1.0 10 20 120 ±0.02 --- Max. ±2.0 ±2.0 --±1.0 ±1.0 ±5.0 ±5.0 --------1.8 1.3 --------5 Unit % % % % % % % % % % % %VPP of Vo %VPP of Vo %Inom. %Inom. % of Vo %/℃ % Vout --- --- % Inom. General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) EMC Emission Conditions Input to Output, 60 Seconds 500 VDC MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety Approvals Min. Typ. Max. Unit 3000 ----VACrms 100 ----MΩ --100 --KHz --20 --ms 200,000 ----Hours EN 55011 class B, EN 55022 class B, FCC part 15 class B Specification Requirement Performance Criteria B Air ±8KV Cont. ±4KV A 80~1000MHz, 10V/m 80% AM, 1KHz modulation B AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50uS(8/20μS) AC dif. ±1KV DC ±0.5KV 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation A 50Hz/60Hz, 30A/m B 30%, 10ms C 60%, 100ms, 95%, 5000ms According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Input Fuse All Models Built-in Fuse External Fuse (Recommended) E-mail:[email protected] 2012/11/14 REV:19 3.5A / 250VAC 1.5A Slow – Blow Type Tel:886-6-2923150 Page 2 of 5 AQF-30 SERIES AC/DC POWER MODULE 30W Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Cooling Humidity (non condensing) Conditions -25℃ Ambient +50℃ to +70℃ +70℃ 1.125W / ℃ +85℃ -40℃ at 90℃ (automatic recovery at 67℃) Free-Air convection --- 95 % rel. H Notes 1 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0~20 MHz 3 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power 4 Other input and output voltage may be available, please contact factory. supplies however they may not meet all listed specifications. 5 Peak current can't be drawn from all output at the same time. 6 Floating (or isolated) output of a power supply that is not connected to any other output. 7 To order the module with chassis mount package, please add a suffix C (e.g. AQF-30S05C). 8 To order the module with UL508 safety, please add a suffix ICE (e.g. AQF-30S05ICE). 9 Part number for DIN-Rail mounting bracket: AC-DIN-02 10 Specifications are subject to change without notice Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 6.0 [0.24] 15.24 [0.60] 12.7 [0.50] 15.24 [0.60] 12.7 [0.50] 21.7 [0.85] 0.7 [0.03] Pin Single Dual (D12,D15) 1 1.0 [ 0.04] 4 3 26.75 [1.05] +Vout 4 No Pin -Vout 6 88.9 [3.50] 81.3 [3.20] 27.5 [1.08] +Vout Common No Pin 7 NC +Vout2 +Vout2 +Vout2 +Vout1 +Vout1 +Vout1 -Vout2 Com. 2/3 -Vout1 -Vout1 NC -Vout3 +Vout3 1 5.0 [0.20] 31.45 [1.24] 2 ►All 55.88 [2.20] 63.5 [2.50] ►Pin Physical Characteristics Case Size : Case Material : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 177g 88.9x63.5x21.7mm (3.50x2.50x0.85 inches) E-mail:[email protected] 2012/11/14 REV:19 dimensions in mm (inches) ►Tolerance: ±0.5 Tel:886-6-2923150 Page 3 of 5 Com. 2/3 -Vout1 -Vout NC: No Connection Bottom View Triple (T5312P,T3512P) AC(L) – AC Line 3 5 Mounting M4.0 Thread Triple AC(N) – AC Neutral 2 5 6 7 Dual (D512) (±0.02) diameter 1.0 ±0.1 (0.04±0.004) AQF-30 SERIES AC/DC POWER MODULE 30W Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections Termina Single l 4 x 3.5 Dual (D12,D15) 1 +Vout 4 -Vout 6 Common NC 7 92.0 [3.62] +Vout NC 5 100.0 [3.94] 112.0 [4.41] NC 10.0 [0.39] -Vout +Vout2 +Vout2 +Vout2 +Vout1 +Vout1 +Vout1 Com. 2/3 -Vout2 Com. 2/3 -Vout1 -Vout1 -Vout1 NC -Vout3 +Vout3 16.8 [0.66] 5.0 [0.20] 25.6 [1.01] NC: No Connection ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pin pitch tolerance: ±0.25 (0.01) Physical Characteristics Case Size : Case Material : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 191g 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-02) Mechanical Dimensions Indication LED Top view 2 1 50.0 [1.97] 7 6 5 4 3 63.8 [2.51] 4 x 3.5 POWER"GOOD"INDICATOR 100.0 [3.94] 112.0 [4.41] 25.6 [1.01] 11.0 [0.43] 3.0 [0.12] 5.0 [0.20] 10.0 [0.39] 16.8 [0.66] 92.0 [3.62] Physical Characteristics Case Size : Case Material : 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 245g E-mail:[email protected] 2012/11/14 REV:19 Tel:886-6-2923150 Page 4 of 5 Triple (T5312P,T3512P) AC(L) – AC Line 3 POWER"GOOD"INDICATOR Triple AC(N) – AC Neutral 2 63.8 [2.51] Indication LED 2 Top view 50.0 [1.97] 1 7 6 5 4 3 Dual (D512) AQF-30 SERIES AC/DC POWER MODULE 30W DIN-Rail Mounting Kit Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2012/11/14 REV:19 Page 5 of 5