THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST - - P LTR A B DESCRIPTION REVISED PER ECR-14-007794 ECO-15-015144: ADD UL. SAFETY ORGANIZATIONS EC EC RS EC 29MAY2014 20NOV2015 STORAGE TEMPERATURE: HUMIDITY: LINE CURRENT/VOLTAGE: 1000 A, 690VAC LINE FREQUENCY: 50-60 Hz NOMINAL LEAKAGE CURRENT: MAXIMUM LEAKAGE CURRENT: 20 mA 390mA OPERATING AMBIENT TEMPERATURE RANGE @ RATED CURRENT, I : -10°C TO +50°C INDUCTANCE, NOMINAL: 36.4 µH CAPACITANCE AT 1KHz, 0.25 VAC MAX., 25°C±1°C LINE TO GROUND, NOMINAL: LINE TO LINE, NOMINAL: 3.1 µF 7.0 µF DISCHARGE RESISTOR L/G AND L/L I.R. 1000 kOhm / 1000 kOhm IR (NO DISCHARGE RESISTOR) 20°C, 50% RH AND 100VDC, MIN: 6000 M ^ RECOMMENDED RECEIVING INSPECTION HIPOT @ 400V, 50HZ LINE TO GROUND FOR 1 MINUTE: 2640 VDC LINE TO LINE FOR 1 MINUTE: 2520 VDC FILTER APPROVAL: IN AN AMBIENT, T , HIGHER THAN 50°C, THE MAXIMUM OPERATING CURRENT, I , IS AS FOLLOWS: I = I RELEASED FOR PUBLICATION -40°C TO +85°C 21 DAYS @ 40°C 95% RH. TEST SPECIFICATIONS OPERATING SPECIFICATIONS 100 - T O R THE BEST WAY TO SELECT AND QUALIFY A FILTER IS FOR YOUR ENGINEERING TO TEST THE UNIT IN YOUR EQUIPMENT. Q 50 115.00 95.00 12.00 28.00 LOAD 225.0 8.00 ALL RIGHTS RESERVED. APVD RELIABILITY SPECIFICATIONS THIS FILTER HAS BEEN FORMALLY RECOGNIZED, CERTIFIED OR APPROVED BY THE LISTED AGENCY. THEREFORE, ALL TEST/REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF THE FOLLOWING AGENCY STANDARDS HAVE BEEN MET: UL 20 DWN DATE 250.0 LINE 200.0 53.0 40.0 60.0 12.0 * 266.0 14.00 40.00 60.0 142.0 33.0 * DO NOT LOOSEN INNER GROUND NUTS. TORQUE OUTER GROUND NUTS TO: 25-30 NM [220-260 IN-LB] 20 TYPICAL INSERTION LOSS COPYRIGHT COMMON MODE 50/50 ^ ;DIFFERENTIAL MODE 100/100 ^ C THIS DRAWING IS UNPUBLISHED. BY - 53.0 DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: 2.0 1.0 0.50 0.200 0.1000 19DEC2013 CHK 19DEC2013 APVD 19DEC2013 RS mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN EC EC PRODUCT SPEC - - Customer Drawing 0.05 0.15 0.5 1.0 3.0 5.0 CM 13 30 60 90 82 80 DM 27 41 55 52 44 33 FINISH 10 30 64 40 19 30 24 16 TE Connectivity NAME SIZE - 0.01 - APPLICATION SPEC WEIGHT 1469-35 (3/11) MATERIAL MHz CAGE CODE A4 00779 1000APS12P 3-PHASE DELTA FILTER DRAWING NO 5-1609114-2 SCALE 1:1 SHEET RESTRICTED TO 1 OF - 1 REV B