EMC Filter FI-B03D Series EMC Filter FEATURES z Compact size z Restrain line disturb of DC power source z The attenuation coefficient of frequency meet 20dB z Cost-effective z Low Temperature Rise z Mounting: PCB mounting, chassis mounting with screw terminals, DIN-Rail mounting RoHS This model applies to analog circuit which is noise-sensitive. Put FI-B03D on to the input of module can ensure EMI performance by a big margin. Selection Guide Model Input Voltage Range (VDC) Nominal Current (A)(max) FI-B03D 0~80 3.0 Note: series with suffix “A2S” are chassis mounting, with suffix “A4S” are DIN-Rail mounting, for example FI-B03DA4S. General Specifications Item Min. Typ. Max. Operating Temperature Test Conditions -40 -- 85 Storage Temperature -55 -- 125 5 -- 95 % -- -- 40 ℃ -- -- 1500 VDC -- 30 -- mΩ Storage Humidity Casing Temperature Rise Nominal Current Withstand Voltage to GND D·C·R Input - Output Unit ℃ General Specifications Aluminum Alloy Casing Material Horizontal package 25.40x25.40x11.70 mm Package Dimensions A2S wiring package 76.00x31.50x21.20 mm A4S rail package 76.00x31.50x25.80 mm Weight Horizontal package/A2S wiring package/A4S rail package 15g/35g/55g(Typ) Frequency Impedance Specifications Item Test Conditions Im 150KHz~100 MHz Min. -- Typ. Max. 20 -- Unit dBΩ Devise Standard FI-B03D can ensure MORNSUN DC/DC converter module with 3A input current EMI meet EN 55022 Class B. 2014.02.18-A/2 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation EMC Filter FI-B03D Series impedance Specifications IMPD(dB Ω ) 60 50 40 30 20 10 100 1k 10k 100k 1.0M 10.M 100.M FREQUENCY(Hz) Design Reference 1. Inside schematic +Vi n +Vo -Vin -Vo 2. Typical application +Vin -Vin FUSE EMI Filter +Vo -Vo +Vin GND DC-DC CONVERTER +Vo +Vin -Vin -Vo FUSE: Due to the difference of the power module input current, the fuse of the recommended values, please refer to the Technical Manual for the power module. FUSE EMI Filter +Vo +Vin -Vo GND +Vo DC-DC CONVERTER -Vo Note: This application is not supported for this series. 3. For more information Please find the application notes on www.mornsun-power.com FI-B03D Dimensions and Recommended Layout 2014.02.18-A/2 Page 2 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation EMC Filter FI-B03D Series FI-B03DA2S Dimensions FI-B03DA4S Dimensions Note: 1. Packing Information please refer to 'Product Packing Information'. The Packing bag number of Horizontal package : 58220003, the Packing bag number of A2S/ A4S package:58220022; 2. Unless otherwise specified, data in this data sheet should be tested under the conditions of Ta=25°C, humidity<75%; 3. All index testing methods in this datasheet are based on 4. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information; 5. We can provide product customization service; 6. Specifications of this product are subject to changes without prior notice. our Company’s corporate standards; MORNSUN Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: [email protected] 2014.02.18-A/2 Page 3 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation