7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. copyright_dateTE Connectivity 1 D 12 3.0 MAX TYP DETAIL A SCALE 20:1 CAGE ASSEMBLY MATERIAL: NICKEL SILVER, 0.25 THICK HEAT SINK MATERIAL: ALUMINUM HEAT SINK CLIP MATERIAL: STAINLESS STEEL EMI SPRING MATERIAL: COPPER ALLOY EMI GASKET MATERIAL: CONDUCTIVE RUBBER,UL 94V-0 RATED EMI GASKET PLATE MATERIAL: STAINLESS STEEL 2 PITCH BETWEEN PORTS OF ONE 1X4 CAGE ASSEMBLY. 3 SPACING BETWEEN CAGES ON THE SAME PC BOARD, TO BE SPECIFIED BY CUSTOMER, MUST COMPLY WITH MINIMUM DIMENSIONS SHOWN. 4 REFERENCE APPLICATION SPEC 114-13217 FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 5 DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 6 DIMENSION F IS THE NOMINAL THICKNESS OF CUSTOMER SUPPLIED PC BOARD, SINGLE SIDED PC BOARD MINIMUM THICKNESS = 1.45mm DOUBLE SIDED PC BOARD MINIMUM THICKNESS = 5.0mm PER CUSTOM. 7 HEAT SINKS, LIGHT PIPES, AND HEAT SINK CLIPS SHIPPED ASSEMBLED TO CAGE ASSEMBLY. CAGE ASSEMBLY MAY BE PRESSED INTO THE PCB AS SHIPPED. 8 DATUM 9 DIMENSION APPLIES WITH MODULE INSERTED IN CAGE. 10 -A- 1 REVISIONS DIST 00 P LTR DESCRIPTION DATE RELEASE PER ECO-16-002978 A DWN APVD RG 3MAR2016 SH 11. MATES WITH QSFP MSA COMPATIBLE TRANSCEIVER. 12 SURFACE TRACES PERMITTED WITHIN THIS AREA EXCEPT WHERE CAGE STANDOFFS, SHOWN IN DETAIL A, CONTACT PC BOARD. 13 BASELINE FOR THESE DIMENSIONS IS THE CENTER OF COMPLIANT PIN HOLE. 14 DATE CODE (YYWWD) MARKED ON TOP OF CAGE AND CONCEALED BY HEAT SINKS APPLIES TO CAGE ASSEMBLY ONLY. 15 REFERENCE APP SPEC 114-13217 FOR GASKET THICKNESS CALCULATION. 16 EMI SPRING FINISH: TIN PLATING OVER NICKEL HEAT SINK FINISH: ANODIZED OR NICKEL PLATING. D IS TOP SURFACE OF PC BOARD. UNPLATED THRU HOLE. 79.45 (GASKET PLATE) 76.25 (OUTSIDE TO OUTSIDE) ( 55.74 ) C C B MAX 2.2 MAX 9 SEE DETAIL 2 A 3X ( 19 ) SIDE EMI SPIRNG WITH HOOKS FOR 1-2170287-0 AND 1-2170287-1 B B SECTION SCALE 2170287-4,2170287-5,2170287-6 SCALE 2:1 B-B 10:1 7 13.7 1-2170287-0 SCALE 2:1 PCI(FIN TYPE) 15.0 CUSTOMIZED HEAT SINK 23.0 23.0 NETWORKING(FIN TYPE) 13.7 PCI(FIN TYPE) ELASTOMERIC GASKET NETWORKING(PIN TYPE) 13.7 PCI(PIN TYPE) 16.0 2170287-1,2170287-2,2170287-3 SCALE 2:1 DIMENSIONS: 2170287-7, 2170287-8, 2170287-9 SCALE 2:1 mm MATERIAL 4805 (3/11) -1 TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 16 DWN 29FEB2012 CHK 29FEB2012 APVD 29FEB2012 KINSEN SUN DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - 114-13217 WEIGHT 2170287-5 2170287-4 2170287-3 2170287-2 2170287-1 HEAT SINK PROFILE PRODUCT SPEC 0.35 0.25 2170287-6 SAN(PIN TYPE) B THIS DRAWING IS A CONTROLLED DOCUMENT. 2170287-7 SAN(FIN TYPE) 23.0 A 2170287-8 PCI(FIN TYPE) 16.0 EMI SPRING 2170287-9 SAN(FIN TYPE) 13.7 1-2170287-1 SCALE 2:1 1-2170287-0 NETWORKING(FIN TYPE) 16.0 CAGE ASSEMBLY 1-2170287-1 - CUSTOMER DRAWING PART NUMBER A TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 4:1 SHEET 1 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION copyright_dateTE Connectivity 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - DESCRIPTION DATE SEE SHEET 1 15.3 APVD - - 14.1 D DWN - 0.15 D NO REAR PINS 1-2170287-0 shown SCALE 4:1 79.75 0.1 MIN 19 3.3 4.13 43 REF ( 1.8 ) C C 0.3 0.1 BEZEL OPEING BELOW PCB SURFACE 77.4 SECTION 0.1 TYP 1-2170287-0 ONE SIDED CONFIGURATION SCALE 5:2 B-B 2.5 TYP 13.87 12.87 B B 1-2170287-1 SHOWN SCALE 4:1 79.75 10.6 0.1 MIN 9.5 0.1 TYP 19 2 TYP 43 REF 1.8 2.82 0.1 TYP 0.3 BEZEL OPEING BELOW PCB SURFACE 77.4 A 1-2170287-1 ONE SIDED CONFIGURATION SCALE 5:2 0.1 TYP A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) B-B SECTION - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 2 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT copyright_dateTE Connectivity RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC REVISIONS DIST GP ALL RIGHTS RESERVED. 1 00 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D HEAT SINK CLIPS QUANTITY: 4 C 7 17 C 72 PIN HEAT SINKS QUANTITY: 4 7 17 1X4 THRU BEZEL QSFP CAGE ASSEMBLY QUANTITY: 1 B B A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 3 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT copyright_dateTE Connectivity RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - 79.75 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 3 0.1 MIN 43 REF ( 1.5) D D BEZEL 10.6 0.1 TYP R 0.3 MAX TYP 0.3 0.1 BEZEL OPENING BELOW PCB SURFACE 77.4 GUIDE POSTS PER SPEC 37 REF SECTION 0.1 TYP B-B C C ONE SIDED CONFIGURATION SCALE 5:2 0.3 0.1 BEZEL OPENING BELOW PCB SURFACE B B 0.3 0.1 BEZEL OPENING BELOW PCB SURFACE F 6 (THICKNESS OF PC BOARD) BELLY TO BELLY CONFIGURATION SIMILAR TO ONE SIDED EXCEPT WHERE NOTED SCALE 5:2 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 4 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. copyright_dateTE Connectivity 1 REVISIONS DIST 00 P LTR - 76.2 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - MAX 13 19 10.6 M SEE DETAIL 13 3.4 4 (1.05) 8X n 1.55 DETAIL SCALE AREA DENOTES COMPONENT KEEP-OUT (TRACES PERMITTED) -U10 19 4X 7.2 TYP D 19 D 8X LED 12 0.05 J SEE DETAIL 0.1 MAX 38X 0.8 TYP 8 3X M 10:1 0.35 0.4 4.5 0.03 38X 1.8 0.03 1 10.3 MAX 11.3 MIN 2.5 C C 8X 2X 0.8 MIN 40.7 2X 5.18 37.7 3.05 MAX 8X 30.1 1.69 3X MAX 9 0.89 3X 15.02 MIN 9 DETAIL J 3 PLACES SCALE 8:1 4.5 B 5 5 BSC 1 MIN -X- 3.75 MIN 4X 4 (1.05) -T- 5 4X BSC 1.1 -Y- 33X (1.05) B 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 4X 5 4 MAX 19 78 MIN CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) RECOMMENDED PC BOARD LAYOUT SINGLE SIDE MOUNT CONFIGURATION SCALE 4:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 5 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. copyright_dateTE Connectivity 1 REVISIONS DIST 00 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 3.2 MIN D M SEE DETAIL 4 76.9 2.21 3X (1.05) 12X -U10 8X n 1.55 3X 13 MIN 0.9 MIN 19 16X 4.13 AREA DENOTES COMPONENT KEEP-OUT (TRACES PERMITTED) 12 0.05 D DETAIL SCALE q OF LED M 10:1 J SEE DETAIL 38X 0.8 TYP 8 0.35 0.4 4.5 0.03 38X 1.8 0.03 1 15.98 2.5 C C 2X 5.18 37.7 3.05 MAX 8X 30.1 1.69 3X MAX 9 0.89 3X 15.02 MIN 9 DETAIL J 3 PLACES SCALE 8:1 4.5 B 5 5 BSC 1 MIN -X- 3.75 MIN 4X 4 (1.05) -T- 5 4X BSC 1.1 -Y- 25X (1.05) B 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 4X 5 4 MAX 19 78 MIN CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) RECOMMENDED PC BOARD LAYOUT FOR 1-2170287-0 SINGLE SIDE MOUNT CONFIGURATION SCALE 4:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm THIS PRODUCT HAS NOT COMPLETED VALIDATION/QUALIFICATION TESTING MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 6 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. copyright_dateTE Connectivity 1 REVISIONS DIST 00 P LTR - 19 10.6 M 13 3.4 4 19 8X n 1.55 APVD - - 19 DETAIL SCALE 12 0.05 4X LED M 10:1 D AREA DENOTES COMPONENT KEEP-OUT (TRACES PERMITTED) 3X 19 0.1 MAX 9.5 SEE DETAIL J 38X 0.8 TYP 8 3X DWN - (1.05) -U- 10 SEE SHEET 1 4X 7.2 TYP D DATE 78 MAX 13 SEE DETAIL DESCRIPTION 0.35 0.4 4.5 0.03 38X 1.8 0.03 1 10.3 MAX 11.3 MIN 15.98 2.5 C C 8X 2X 0.8 MIN 40.7 2X 5.18 37.7 3.05 MAX 8X 30.1 1.69 3X MAX 9 0.89 3X 15.02 MIN 9 DETAIL J 3 PLACES SCALE 8:1 4.5 B 5 5 BSC 1 MIN -X- 3.75 MIN 4X 4 (1.05) -T- 5 4X BSC 1.1 -Y- 33X (1.05) B 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 4X 5 4 MAX 19 78 MIN CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) RECOMMENDED PC BOARD LAYOUT SINGLE SIDE MOUNT CONFIGURATION FOR 1-2170287-1 SCALE 4:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 7 OF RESTRICTED TO - 8 REV A 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT RELEASED FOR PUBLICATION 6 5 4 3 2 2012 LOC GP ALL RIGHTS RESERVED. copyright_dateTE Connectivity 1 REVISIONS DIST 00 P LTR - 19 19 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 19 4x 13.4 D 4 4x 10.6 (1.05) D 4x 6.2 -U- 8X 4x 3.4 10 8X n 1.55 q OF LED 0.05 K SEE DETAIL 4.5 38X 0.35 0.03 0.8 TYP 38X 1.8 0.03 0.4 C C 2.5 16X 40.7 37.7 5.18 8X 30.1 1 7X B 5 5 4.5 BSC -X- 3.75 MIN 4 (1.05) B DETAIL K SCALE 8:1 4X 5 BSC 1.1 4X 8 61X (1.05) 4 3 TO q OF FIRST ROW OF HOLES FOR NEXT ADJACENT CAGE 17.9 -T5 -Y- 4X 19 RECOMMENDED PC BOARD LAYOUT BELLY TO BELLY CONFIGURATION SEE SHEET 4 FOR COMPONENT AND TRACE KEEP-OUTS SCALE 4:1 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm THIS PRODUCT HAS NOT COMPLETED VALIDATION/QUALIFICATION TESTING MATERIAL 4805 (3/11) - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH CHK 29FEB2012 APVD 29FEB2012 DENNY ZHU ALEX CAI 108-2286 APPLICATION SPEC - - 29FEB2012 KINSEN SUN PRODUCT SPEC 0.35 0.25 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN 114-13217 WEIGHT - CUSTOMER DRAWING TE Connectivity NAME 1X4 CAGE ASSEMBLY, THRU BEZEL, W/ELASTOMERIC GASKET AND HEAT SINKS, QSFP SIZE CAGE CODE A1 00779 DRAWING NO 2170287 SCALE 1:1 SHEET 8 OF RESTRICTED TO - 8 REV A