ADAM-4011 ADAM-4012 ADAM-4013 ADAM-4011 RoHS COMPLIANT 2002/95/EC 1-ch Thermocouple Input Module 1-ch Analog Input Module 1-ch RTD Input Module ADAM-4012 COMPLIANT 2002/95/EC Specifications Specifications ADAM-4013 RoHS RoHS COMPLIANT 2002/95/EC Specifications General General General Power Consumption 1.4 W @ 24 VDC Supported Protocols ASCII command Power Consumption 1.2 W @ 24 VDC Supported Protocols ASCII command Power Consumption 0.7 W @ 24 VDC Supported Protocols ASCII command Analog Input Channels Input Impedance 1 Voltage: 2 MΩ Current: 125 Ω (Added by user) Input Type T/C, mV, V or mA Input Range ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA Accuracy Voltage mode: ±0.1% or better Current mode: ±0.2% or better T/C Type and Temperature Range J K T E 0 ~ 760°C 0 ~ 1,370°C -100 ~ 400°C 0 ~ 1,000°C Span Drift Zero Drift R S B 500 ~ 1,750°C 500 ~ 1,750°C 500 ~ 1,800°C ±25 ppm/°C ±6 µV/°C Analog Input Channels Input Impedance Input Type Input Range Accuracy Span Drift Zero Drift Digital Input Channels Digital Input Channels Event Counter 1 Logic level 0: 1 V max. Logic level 1: 3.5 ~ 30 V Pull up current: 0.5 mA, 10 kΩ resistor to 5 V Max. input freq: 50 Hz Event Counter Channels 2, open collector to 30 V, 30 mA max. load Power Dissipation 300 mW Supports high/low alarms 1 Logic level 0: 1 V max. Logic level 1: 3.5 ~ 30 V pull up current: 0.5 mA, 10 kΩ resistor to 5 V Max. input freq.: 50 Hz Min. input pulse width: 1 msec. Power Input Connectors Watchdog Timer Analog Input Resolution Sampling Rate Channels 1 Input Connections 2 or 3-wire Input Impedance 2 MΩ Input Type Pt or Ni RTD RTD Types and Temperature Ranges IEC RTD 100 ohms Pt -100°C to +100°C a = 0.00385 Pt 0°C to +100°C a = 0.00385 Pt 0°C to +200°C a = 0.00385 Pt 0°C to +600°C a = 0.00385 JIS RTD 100 ohms Pt -100°C to +100°C a = 0.003916 Pt 0°C to +100°C a = 0.003916 Pt 0°C to +200°C a = 0.003916 Pt 0°C to +600°C a = 0.003916 Ni RTD Ni -80°C to +100°C Ni 0°C to +100°C Accuracy ±0.1% or better Span Drift ±25 ppm/°C Zero Drift ±3 µV/°C Power Dissipation 2, open collector to 30 V, 30 mA max. load 300 mW Common Specifications Ordering Information CMR @ 50/60 Hz NMR @ 50/60 Hz Isolation Voltage General Digital Output Channels Digital Output Analog Input 1 Voltage: 20 MΩ Current: 125 Ω (Added by user) mV, V or mA ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V and ±20 mA Voltage mode: ±0.1% or better Current mode: ±0.2% or better ±25 ppm/°C ±6 µV/°C 150 dB 100 dB 3,000 VDC Unregulated 10 ~ 30 VDC 1 x plug-in terminal block (#14 ~ 22 AWG) Environment System (1.6 second) Operating Humidity 5 ~ 95% RH Operating -10 ~ 70°C (14 ~ 158°F) Temperature 16-bit Storage Temperature -25 ~ 85°C (-13 ~ 185°F) 10 sample/second ADAM-4011 ADAM-4012 ADAM-4013 1-ch Thermocouple Input Module 1-ch Analog Input Module 1-ch RTD Input Module RS-485 I/O Modules: ADAM-4000 All product specifications are subject to change without notice Last updated : 5-May-2015