Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D6DA1G960K2B1 Features Item Summary SAW, Duplexer, 1.8x1.4x0.57mm Band 2 / BC 1 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions W-CDMA / CDMA Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.57 mm band Band 2 / BC 1 Insertion Loss (typ) 1.9/2.5 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 54/54 dB Operating Temp. Range -30 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Nov. 04, 2015 Final Table 1. Electrical Specification Tx Specification Condition Item (MHz) Insertion loss to ANT Unit Remarks 3.0 dB(*1) -20 to +85 C 1.7 2.7 dB(*1) -20 to +85 C - 1.8 2.9 dB(*1) - 1.5 2.2 dB - 1.6 2.0 - - 1.6 2.1 - Min Typ. Max 1850.48~1909.52 - 1.9 1852.4~1907.6(*2) - 1851.25~1908.75(*3) Ripple A 1850.48~1909.52 VSWR N ANT TxT 1850.48~1909.52 o Input power 1850.48~1909.52 Absolute 1570~1580 35 38 - dB attenuation 1930.48~1989.52 42 51 - dB 1931.25~1988.75(*3) 41 51 - dB 3700~3820 20 34 - dB 5550~5730 15 27 - dB 1930.48~1989.52 - 2.5 3.3 dB(*1) -20 to +85 C to 1932.4~1987.6(*2) - 2.2 3.0 dB(*1) -20 to +85 C Rx 1931.25~1988.75(*3) - 2.3 3.2 dB(*1) 1930.48~1989.52 - 1.5 2.3 dB - 1.6 2.1 - - 1.9 2.2 - ANT Insertion loss Ripple VSWR ANT Rx Tx 1930.48~1989.52 +29dBm,Ta=+50oC,50kh,CW dBm o Support LTE o -20 to +85 C o o o Absolute 1850.48~1909.52 42 53 - dB attenuation 1851.25~1908.75(*3) 43 53 - dB Isolation 1850.48~1909.52 51 54 - dB 1851.25~1908.75(*3) 51 54 - dB 48 54 - dB -20 to +25 C 51 54 - dB +25 to +85 C 50 54 - dB -20 to +25 C 51 54 - dB +25 to +85 C 47 54 - dB -30 to +25 C 51 54 - dB +25 to +85 C to Rx 1930.48~1989.52 1932.4~1987.6(*2) 1931.25~1988.75(*3) -20 to +85 C o -20 to +85 C o o o o o o Terminating Tx port 50 Ohm Single-ended Impedance Rx port 50 Ohm Single-ended Ant port 50 // 3.9nH Ohm Single-ended Operating Temperature Device size (LxWxH) -30 to +85 1.8 x 1.4 x 0.57 Max (*1) Specification of insertion loss excludes loss that comes from the test board. (*2) The integrated loss over any 3.84MHz(+/- 1.92MHz) channel within the band. (*3) The integrated loss over any 1.25MHz(+/- 0.625MHz) channel within the band. o C mm Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Nov. 04, 2015 Final Dimensions 0.57max. max <7> <6> <5> <8> index <1> <5> <4> <2> <6> <7> <4> <3> <8> <3> < Top View > < Side View > <2> <1> < Bottom View > Unit: mm Pin Configuration Pin No. Pin name Description 1 Rx Receiver Pin 2 GND Ground Pin 3 Tx Transmitter Pin 4 GND Ground Pin 5 GND Ground Pin 6 ANT Antenna Pin 7 GND Ground Pin 8 GND Ground Pin Figure 1. Dimensions and Pin assignment Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Nov. 04, 2015 Final Evaluation Circuit Ant L=3.9nH (50ohm) 6 Rx (50ohm) Tx (50ohm) 1 2,4,5 3 7,8 GND 1~8 : Pin No. Recommended foot print pattern Common GND Common GND External appearance in Chip carrier External appearance in Chip carrier :Pad pattern :Resist pattern Figure 2. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. Nov. 04, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. Nov. 04, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Tx Port Figure 3-3. Electrical Characteristics Nov. 04, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB RxPort Figure 3-4. Electrical Characteristics Nov. 04, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Ant Port Figure 3-5. Electrical Characteristics Nov. 04, 2015 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Tx to Ant (Wide Span) Ant to Rx (Wide Span) Figure 3-6. Electrical Characteristics Nov. 04, 2015 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System WCDMA Band 2/ CDMA2000 BC1/ LTE Band 2 Duplexer Date Part Number D6DA1G960K2B1 Ver.3.2ccB Nov. 04, 2015 Final Ordering Code Ordering Code Packing Reel size Status D6DA1G960K2B1-Z Tape & Reel 3,000 pcs. MP D6DA1G960K2B1-ZA Tape & Reel less than 3,000 pcs. MP D6DA1G960K2B1-Y Tape & Reel 15,000 pcs. MP D6DA1G960K2B1-YA Tape & Reel less than 15,000 pcs. MP D6DA1G960K2B1-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives. *MP: Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact TAIYO YUDEN Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact TAIYO YUDEN in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.