SPECIFICATION FOR APPROVAL REF : 20070320-A PROD. NAME PAGE: 1 ABC'S DWG NO. SMD POWER INDUCTOR CB6011□□□□L□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS： A 6.20±0.15 6.60 max. 1.10±0.10 2.00±0.30 1.50±0.20 2.20 ref. 6.60 ref. 4.00 ref. m/m m/m m/m m/m m/m m/m m/m m/m C B 7 R 4 A : B : C : D : E : F : G: H: E F D G H (PCB Pattern Suggestion) Ⅱ﹒SCHEMATIC DIAGRAM： a b Ⅲ﹒MATERIALS： c d a﹒Core：Ferrite core b﹒Wire：Enamelled copper wire Peak Temp：260℃ max. Max time above 230℃ ：50sec max. Max time above 200℃ ：70sec max. c﹒Base：Cu/Ag(1.0um) d﹒Adhesive：Epoxy resin e﹒Remark：Products comply with RoHS' requirements Temperature Rising Area Preheat Area +4.0 ℃ / sec max. 150 ~ 200 ℃ / 60 ~ 120sec Reflow Area +2.0 ~ 4.0℃ Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅳ﹒GENERAL SPECIFICATION： a﹒Temp. rise ：40℃ typ. b﹒Storage temp.：-40℃ ----+120℃ c﹒Operating temp.：-40℃----+125℃ Temperature ( ℃ ) 50sec max. 230℃ 200 150 70sec max. 100 50 (included Temp. rise) d﹒Resistance to solder heat：260℃.10 secs. AR-001A 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL PAGE: 2 REF : 20070320-A PROD. SMD POWER INDUCTOR NAME ABC'S DWG NO. CB6011□□□□L□-□□□ ABC'S ITEM NO. Ⅴ﹒ELECTRICAL CHARACTERISTICS ： DWG No. Inductance (µH) 0.1V/100KHz RDC (Ω) max. Irms. (A) typ. Isat. (A) max. CB60111R5ML□-□□□ 1.5±20% 0.09 1.90 2.50 CB60112R7ML□-□□□ 2.7±20% 0.12 1.65 1.80 CB60114R7ML□-□□□ 4.7±20% 0.17 1.38 1.55 CB60116R8ML□-□□□ 6.8±20% 0.30 1.24 1.24 CB6011100ML□-□□□ 10.0±20% 0.36 1.07 1.07 CB6011150ML□-□□□ 15.0±20% 0.55 0.88 0.88 CB6011220ML□-□□□ 22.0±20% 0.74 0.73 0.72 CB6011330ML□-□□□ 33.0±20% 1.25 0.57 0.54 CB6011470ML□-□□□ 47.0±20% 1.65 0.50 0.46 1). Packing information : A : Bulk B : Taping Reel 2)."- □□□ ":Reference code 3). Irms. base on temp. rise 40℃ typ. 4). Isat. base on △ L/LOA=10% max. AR-001A SPECIFICATION FOR APPROVAL REF : 20070320-A PROD. PAGE: 3 ABC'S DWG NO. SMD POWER INDUCTOR NAME CB6011□□□□L□-□□□ ABC'S ITEM NO. Ⅵ﹒PACKAGING INFORMATION ( 1 ) Configuration T Cover Tape N A B 2.0±0.5 ∮C ∮C D G Embossed Carrier ※ Carrier tape width : D P:8m/m 4m/m End Start ． 7 R 4 ． 7 R 4 ． 7 R 4 Leader no component 200 m/m min. ． 7 R 4 ． 7 R 4 7 R 4 ． Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 07 - 12 178 B 21±0.8 C D 13 12 N G 14 +0 50 -0 T 18.4 ( 3 ) Q'TY & G.W. Per package Outer : Carton Inner : Reel Series CB6011 AR-001A Q'TY (pcs) G.W. (gw) 1,500 330 Style 07 - 12 Q'TY (pcs) 60,000 G.W. (Kg) 13.2 Size (cm) 42 x 41 x 24 SPECIFICATION FOR APPROVAL REF : 20070320-A PROD. PAGE: 4 SMD POWER INDUCTOR NAME ABC'S DWG NO. CB6011□□□□L□-□□□ ABC'S ITEM NO. Ⅶ﹒DWGING NUMBER EXPRESSION： C B 3 0 1 1 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001A Inner package Inner package Q'TY A T.B.D. T.B.D. B T /R (Reel package) 1500 pcs Remark SPECIFICATION FOR APPROVAL REF : 20070320-A PROD. NAME PAGE: 5 SMD POWER INDUCTOR ABC'S DWG NO. CB6011□□□□L□-□□□ ABC'S ITEM NO. Ⅷ﹒RELIABILITY TEST： Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 90% of the terminal electrode Shall be covered With fresh solder. Preheat : 150±25℃ for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 260±5℃ Flux : Rosin Dip time : 4±1 seconds Inductance shall not change more than ±20% Room temp. 15 minutes -25±2 ℃ 30 minutes Room temp. 15 minutes 85±2 ℃ Total : 50 cycles Humidity Resistance test Temperature : 40±2℃ Humidity : 90 ~ 95% Applied current : Per spec. Time : 500 hours High temp. Resistance test Temperature : 80±2℃ Applied current : Per spec. Time : 500 hours AR-001A 30 minutes SPECIFICATION FOR APPROVAL PAGE: 6 REF : 20070320-A PROD. NAME SMD POWER INDUCTOR CB6011□□□□L□-□□□ ABC'S DWG NO. ABC'S ITEM NO. Ⅸ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 OC ____ ____ Polyamideimide Polyamide Modified ____Epoxy ____ Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Modified Polyester Polyurethane ANSI Type MW81-C MW75C MW35C ___ ___ ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ Mark Dsg ____ ____ ____ ____ ____ ____ BC Coat Typ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Temp Class 220 130 200 180 200 220 200 155 155 130 155 155 155 180 155 155 155 180 180 MW26C MW79 155 155 A not-for-profit organization dedicated to public safety and committed to quality service Page 1 of 2 287806002 Mtl Dsg Coat Typ E174837 OC Polyamide ____ ____ ____ Nylon Polyamide ANSI Type Temp Class MW80C MW2-C ___ 155 105 130 130 130 130 MW75C MW28-C MW28-C @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. Marking: Company name or trademarks or 榮星電線 , material designation or marked designation on packaed or reel, and Recognized Component Mark. See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AR-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000