Strain Reliefs MS27559 Strain Relief Glenair Connector Designator E MIL-DTL-26500 MS27559-4 Basic Part No. Dash No. E A Thread Wire Holes (3 Equally Spaced) Set Screw C F G H TABLE I A Thread Dash Shell Size No. Ref. Class 2B 8 .437 - 28 UNEF 1 10 .562 - 24 UNEF 2 3 12 .750 - 20 UNEF 14 .812 - 20 UNEF 4 16 .938 - 20 UNEF 5 1.062 - 18 UNEF 6 18 20 1.188 - 18 UNEF 7 8 22 1.312 - 18 UNEF 1.438 - 18 UNEF 24 9 C Max .672 (17.1) .797 (20.2) 1.016 (25.8) 1.110 (28.2) 1.234 (31.3) 1.360 (34.5) 1.485 (37.7) 1.610 (40.9) 1.735 (44.1) E Max 1.173 (29.8) 1.293 (32.8) 1.293 (32.8) 1.460 (37.1) 1.443 (36.7) 1.561 (39.6) 1.732 (44.0) 1.732 (44.0) 2.000 (50.8) F Max .602 (15.3) .650 (16.5) .740 (18.8) .775 (19.7) .830 (21.1) .897 (22.8) .955 (24.3) 1.015 (25.8) 1.077 (27.4) G Max .892 (22.7) 1.072 (27.2) 1.072 (27.2) 1.108 (28.1) 1.108 (28.1) 1.233 (31.3) 1.477 (37.5) 1.477 (37.5) 1.727 (43.9) H Dia .201 (5.1) .320 (8.1) .320 (8.1) .452 (11.5) .508 (12.9) .571 (14.5) .748 (19.0) .748 (19.0) .996 (25.3) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Finish: Anodize. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 62-4