Sensortechnics AD9-0001-B06 Ultrasonic air bubble and air-in-line sensor Datasheet

AD8 / AD9 Series
Ultrasonic air bubble and air-in-line sensors
FEATURES
· Non-invasive pulse-type ultrasonic
technology
· Compact design features integral
programmable micro-controller
· High accuracy and reliability
· Dry coupled, no coupling gel required
· Output signal not affected by fluid or
tubing colour
· High EMI and RFI noise immunity
SPECIFICATIONS
ELECTRICAL CONNECTION
Maximum ratings
Supply voltage (VS)
Supply current
without LED
with LED
Temperature limits
Storage
Operating
5 VDC (± 10%)
RED
15 mA
24 mA
BLACK
Ground
GREEN
Self-Test
Sensor
-20 ... 85 °C
5 ... 60 °C
ORANGE
Humidity limits
Input DC Voltage
CMOS Logic Output
0 - 95 %RH
(non-condensing)
Note: Self-Test provides an electronic check for
false wet output signals.
Connect to Ground for normal operation.
August 2007 / 301
1/3
www.sensortechnics.com
AD8 / AD9 Series
Ultrasonic air bubble and air-in-line sensors
PERFORMANCE CHARACTERISTICS
Characteristics
Min.
Typ.
Max.
Logic low voltage
Units
0.5
V
VS - 0.5
Logic high voltage
Output sink current (output low)
5
Output source current (output high)
5
Response time
mA
wet to dry
0.215
dry to wet
46
ms
OUTLINE DRAWING
D
H
A
E
H
B
G
C
F
Threaded holes
4-40 x 0.22 (5.59)
Wires
Dimensions
Part no.
AD8...01
AD...02
AD9...4M
AD...03
AD...04
AD9...06
AD9...08
AD9...10
Tubing siz e
1/16" O.D.
1/8" O.D.
4 mm O.D.
3/16" O.D.
1/4" O.D.
3/8" O.D.
1/2" O.D.
5/8" O.D.
A
0.045
0.100
0.125
0.150
0.200
0.310
0.430
0.520
B
0.150
0.325
0.350
0.315
0.400
0.525
0.750
0.850
C1
0.750
0.620
0.650
0.650
0.700
0.825
1.050
1.150
D
1.12
E
0.80
F
0.88
G
0.55
H
0.165
1.00
0.75
0.75
0.50
0.125
Note:
1. The following products come with an extension base which adds another 0.30 inches to dimension C:
AD8...02, ...03, ...04
AD9...4M, ...08, ...10
all dimensions in inches
August 2007 / 301
2/3
www.sensortechnics.com
AD8 / AD9 Series
Ultrasonic air bubble and air-in-line sensors
ORDERING INFORMATION
Series
Options
AD
Design type
8
9
Options
for rigid tubing 0000 without LED,
36 inch cable
for soft tubing
0001 with LED,
36 inch cable
Application
Tubing siz e
E End of sample
01
1/16 inch O.D.
B Bubble size equal
to tube I.D.
02
1/8 inch O.D.
4M
4 mm O.D.
03
3/16 inch O.D.
04
1/4 inch O.D.
06
3/8 inch O.D.
08
1/2 inch O.D.
10
5/8 inch O.D.
S Bubble size down
to 50 % of tube I.D.
Notes:
01: only as AD8-...E01
4M: only as AD9-...
06: only as AD9-0000...
08: only as AD9-0000...
10: only as AD9-0000-E...
Example:
Notes:
AD
9
-
0000
-
B
4M
Sensortechnics is asking customers for a sample of their tubing. The sensor will then be
calibrated for exactly this tubing. For proper function the sensor should only be used
with the tubing which was sent to Sensortechnics!
Custom specific modifications are widely available. Please contact your nearest
Sensortechnics sales office for further information.
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
August 2007 / 301
3/3
www.sensortechnics.com
Similar pages