LQW18AN10NJ80# “#” indicates a package specification code. < List of part numbers with package codes > LQW18AN10NJ80D , LQW18AN10NJ80J , LQW18AN10NJ80B Shape Notes In operating temperature exceeding +85℃, derating of current is necessary for LQW18AN̲80 series. Please apply the derating curve shown in chart according to the operating temperature. Please confirm the below "Notice (Rating)". References Packaging code L size 1.65 ±0.1mm W size 0.99 ±0.1mm T size 0.90 ±0.1mm Size code in inch (mm) 0603 (1608) Specifications Minimum quantity φ180mm Paper taping 4000 φ330mm Paper taping 10000 Packing in bulk 500 Mass (Typ.) 1 piece 0.0034g Specifications Inductance 10nH ±5% Inductance test frequency 100MHz Rated current (Itemp) (Based on Temperature rise) 1600mA Max. of DC resistance 0.052Ω Q (min.) 38 Q test frequency 250MHz Self resonance frequency (min.) 4750MHz Operating temperature range (Self-temperature rise is not included) -55〜125℃ 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2016/01/11 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Frequency characteristics (Typ.) Q-Frequency characteristics (Typ.) Notice (Rating) 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2016/01/11