Automotive Relays Plug-in Mini ISO Relays Power Relay F4 A ■ Pin assignment similar to ISO 7588 part 1 ■ Plug-in terminals ■ Customized versions on request – Integrated components (e.g. resistor, diode) – Customized marking – Special covers (e.g. brackets, shrouded) Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. Contact Data Contact arrangement 1 form C, 1 CO 1 form A, 1 NO Rated voltage 12VDC Limiting continuous current, form A/form B NO/NC NO 23°C 60/45A 60A 85°C 40/30A 40A 125°C 17/12A 17A Limiting making current1), form A/form B 120/45A120A Limiting breaking current, form A/form B 60/40A60A Limiting short-time current overload current, ISO 8820-32) 1.35 x 40A, 1800s 2.00 x 40A, 60s 6.00 x 40A, 1s Jump start test, ISO 16750-1 24VDC for 5min, conducting nominal current at 23°C Contact material silver based Min. recommended contact load3) 1A at 5VDC Initial voltage drop at 10A, form A (NO) contact, typ./max. 15mV/200mV form B (NC) contact, typ./max. 20mV/250mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms4) 136-A_fbw1 Contact Data (continued) Electrical endurance5)>1x105 ops. resistive load, form A (NO) contact 40A, 14VDC resistive load, form B (NC) contact 30A, 14VDC Mechanical endurance >1x106 ops. 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC load voltages. For a load current duration of maximum 3s for a make/ break ratio of 1:10. 2) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 4) For unsuppressed relay coil. Any parallel device to the coil will increase the release time. 5) Electrical endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. Coil Data Rated coil voltage 12VDC Coil versions, DC coil Coil code 001 004 Rated voltage VDC 12 12 Operate voltage VDC 7.2 7.2 Release voltage VDC 1.6 1.2 Coil resistance6) Ω±10% 114 90 Rated coil power6) W 1.3 1.6 6) Without components in parallel. All figures are given for coil without pre-energization, at ambient temperature +23°C. Max. DC load breaking capacity Coil operating range TEVF4_OVR1 Does not t the tempe the contac E = pre-en Load limit curve 1: arc extinguishes during transit time (changeover contact). Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 12-2017, Rev. 1217 www.te.com © 2017 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Does not take into account the temperature rise due to the contact current E = pre-energization. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Automotive Relays Plug-in Mini ISO Relays Power Relay F4 A (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Other Data (continued) Terminal type Cover retention pull force push force Terminal retention pull force push force resistance to bending force applied to side torque Weight Packaging unit standard cover cover with notches 500Vrms 500Vrms 500Vrms Other Data EU RoHS/ELV compliance compliant Protection to heat and fire according UL94 UL94-HB or better Ambient temperature -40 to 125°C Category of environmental protection, IEC 61810 RT I (dustproof) Degree of protection, IEC 60529 IP54 (dustproof) Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g7) Shock resistance (functional) IEC 60068-2-27 (half sine) 11ms, min. 20g7) Drop test, free fall, IEC 60068-2-32 1m onto concrete plug-in, QC 150N 200N 100N 100N 10N8) 10N8) 0.3Nm approx. 35g (1.2oz) 294 pcs. 273pcs. 7) No change in the switching state >10µs. Valid for NC contacts, NO contact values significantly higher. 8) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. Accessories For details see datasheet Connectors for Mini ISO Relays Terminal Assignment COD 1 form C, 1 CO with diode CO 1 form C, 1 CO 2 1 5 4 2 3 1 5 COR 1 form C, 1 CO with resistor 4 3 Dimensions (version with standard cover) 2 1 5 4 3 NOR 1 form A, 1 NO with resistor 2 5 1 3 View of the terminals (bottom view) 136A_DD2 136A_DD1 2 12-2017, Rev. 1217 www.te.com © 2017 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Automotive Relays Plug-in Mini ISO Relays Power Relay F4 A (Continued) Dimensions (version with notches) View of the terminals (bottom view) 136_X96_DD2 136_X96_DD1 136_X96_DD3 Product code structure Typical product code V23136 -A 0 001 -Xnnn Type V23136 Power Relay F4 A Contact arrangement A 1 form C, 1 CO B Cover 0 Standard Coil 001 12VDC 004 Terminal/arrangement Xnnn Customized (nnn: version number) Production in Europe (only) Product code Equivalent to V23136-A0001-X0833) V23136-A0004-X058 V23136-A0004-X059 V23136-A0004-X086 V23136-A0004-X075 VF4A-15F11 VF4A-15F11-S01 VF4A-15F11-S05 VF4A-15F21-S01 1 form A, 1 NO 12VDC Arrangement 1 form C, 1 CO Coil suppr. Resistor 680Ω Resistor 680Ω Diode (cathode 1) Resistor 680Ω Circuit1) Contact mat. COR CO COR COD COR Silver based Coil 12VDC Silver based2) Part number 4-1414977-8 1-1414686-0 1-1414687-0 4-1414992-7 7-1414985-1 1) See terminal assignment diagrams. 2) Special contact material for capacitive loads. 3) Special cover with notches. Production in Asia (only) Product code Equivalent to V23136-A0004-X058 V23136-A0004-X059 V23136-A0004-X086 V23136-B0001-X104 V23136-A0004-X075 VF4A-15F11 VF4A-15F11-S01 VF4A-15F11-S05 VF4A-15F21-S01 Arrangement 1 form C, 1 CO 1 form A, 1 NO 1 form C, 1 CO Coil suppr. Resistor 680Ω Diode (cathode 1) Resistor 680Ω Circuit1) Contact mat. CO COR COD NOR COR Silver based Silver based2) Coil 12VDC Part number 6-1904112-9 7-1904112-0 7-1904112-1 7-1904116-0 4-1904134-7 1) See terminal assignment diagrams. 2) Special contact material for capacitive loads. Other types on request. These liste represent the most common types and do not show all variants covered by this datasheet. 12-2017, Rev. 1217 www.te.com © 2017 TE Connectivity. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3