CCF07 Vishay Dale Metal Film Resistors, Industrial, ± 2 % and ± 5 % Tolerance FEATURES • 0.25 watt at + 70 °C power rating Dual rated for 0.5 watt Pb-free Available • ± 2 % and ± 5 % tolerance e3 • ± 100 ppm/°C and ± 200 ppm/°C temperature coefficient RoHS* • Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) COMPLIANT • Flame retardant epoxy conformal coating • Standard 4 band color code marking for ease of identification after mounting • Lead-(Pb)-free version is RoHS compliant STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MODEL MODEL POWER RATING P70 ˚C W LIMITING ELEMENT VOLTAGE MAX. V쓖 TEMPERATURE COEFFICIENT ppm/°C TOLERANCE RESISTANCE RANGE % Ω E-SERIES CCF07 CCF-07 0.25 / 0.5 250 ± 100 ± 2, ± 5 10R - 1M 24 CCF07 CCF-07 0.25 / 0.5 250 ± 200 ±5 1.1M - 2M 24 TECHNICAL SPECIFICATIONS PARAMETER UNIT CCF07 Rated Dissipation at 70 °C W 0.25 / 0.5 Maximum Working Voltage V쓖 ≤ 250 Insulation Voltage (1 min) Veff 500 Dielectric Strength VAC 450 Insulation Resistance Ω ≥ 1011 Operating Temperature Range °C - 65 / + 150 Terminal Strength (pull test) lb 2 Weight g 0.35 max GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF07240RGKR36 (preferred part numbering format) C C F 0 7 GLOBAL MODEL RESISTANCE VALUE CCF07 R = Decimal K = Thousand M = Million 10R0 = 10 Ω 680K = 680K Ω 2M00 = 2.0M Ω 2 4 0 TOLERANCE CODE G=±2% J=±5% R G K TEMPERATURE COEFFICIENT K = 100 ppm N = 200 ppm R 3 6 PACKAGING SPECIAL E36 = Lead free, T/R (5000 pcs) Blank = Standard R36 = Tin/Lead, T/R (5000 pcs) (Dash Number) (up to 3 digits) from 1 - 999 as applicable Historical Part Number example: CCF-07241G (will continue to be accepted) CCF-07 241 G R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 12 For Technical Questions, contact [email protected] Document Number: 31013 Revision 08-Dec-05 CCF07 DIMENSIONS in inches [millimeters] 1.100 ± 0.040 [27.94 ± 1.02] 0.245 ± 0.020 [6.22 ± 0.51] Refer to note for Wire Dia. RATED POWER IN % Metal Film Resistors, Industrial Vishay Dale 120 100 80 60 40 0.090 ± 0.008 [2.29 ± 0.20] 20 0 *Note: Wire Dia. CCF07 (Sn/Pb) = 0.025 ± 0.002 [0.64 ± 0.05] CCF07 (Sn) = 0.023 ± 0.002 [0.60 ± 0.05] - 65 - 50 - 25 0 25 50 70 75 100 125 150 175 200 AMBIENT TEMPERATURE IN ˚C DERATING MARKING - Color band RESISTANCE VALUES Vishay Dale Model CCF07 is available in the standard 24 resistance values per decade. Values are obtained from the following decade table by multiplying by powers of 10. As an example: 24 can represent 24 ohm, 240 ohm, 2.4 kohm, 24 kohm or 240 kohm. 10 18 33 56 11 20 36 62 12 22 39 68 13 24 43 75 15 27 47 82 16 30 51 91 PERFORMANCE MAX. ∆R (Typical Test Lots) TEST* Thermal Shock ± 1.0 % Short Time Overload ± 0.5 % Low Temperature Operation ± 0.5 % Moisture Resistance ± 1.5 % Resistance to Soldering Heat ± 0.5 % Shock / Bump ± 0.5 % Vibration ± 0.5 % Terminal Strength ± 0.5 % Dielectric Withstanding Voltage ± 0.5 % Life ± 1.5 %** * Test Methods per MIL-STD-202G/IEC 60115/DIN EN 140000 (as applicable). ** Life ∆R is ± 2.0 % for 1/2 watt rating. Document Number: 31013 Revision 08-Dec-05 For Technical Questions, contact [email protected] www.vishay.com 13 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1