DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN : DWx-LJG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > > > > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), Display: full color display video notice board. Industry: white goods (eg: Oven, microwave, etc.). Lighting: architecture lighting, general lighting, garden light, etc © 2005 DomiLED is a trademark of DOMINANT Opto Technologies All rights reserved. Product specifications are subject to change without notice. 1 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ 30mA IV (mcd) Min. Typ. Max. DWT-LJG-WX2-1 True Green; 525nm 120 1125.0 1800.0 2850.0 DWB-LJG-T2V1-1 Blue; 470nm 120 355.0 560.0 900.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Part Number Min. (V) DWx-LJG Vf @ If = 30mA Typ. (V) Max. (V) 3.00 3.30 Vr @ Ir = 10uA Min. (V) 5 4.00 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 180 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of O dom (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C TC O Part Number dom (typ) TCV TCIV 3 Value DWT-LJG 0.04 DWB-LJG 0.02 DWT-LJG -2.2 DWB-LJG -2.3 DWT-LJG -0.14 DWB-LJG -0.30 Unit nm / K mV / K %/K 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) Full 520 - 535 A 520 - 525 DWT; True Green DWB; Blue B 525 - 530 C 530 - 535 Full 460 - 475 A0 460 - 465 A 465 - 470 B 470 - 475 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group T2 355.0 ... 450.0 U1 450.0 ... 560.0 U2 560.0 ... 715.0 V1 715.0 ... 900.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. 4 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage 100 3 90 2.5 Forward Current, mA Relative Relative Intensity; Intensity;Normalized Normlaizedatat30mA 50mA Relative Intensity Vs Forward Current 2 1.5 1 0.5 70 60 50 40 30 20 10 0 0 0 20 40 60 80 100 2.5 3 3.5 4 4.5 Forward Current, mA Forward Voltage, V Maximum Current Vs Temperature Relative Intensity vs Wavelength 1 60 Forward Current, mA 80 0.9 50 0.8 True Green Blue 0.7 40 0.6 0.5 30 0.4 20 0.3 0.2 10 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 400 450 500 550 600 650 700 Ambient Temperature Wavelength; nm Wavelength Shift vs Forward Current (True Green) Wavelength Shift Vs Forward Current (Blue) 3.6 14 3.2 12 Wavelength Shift; nm Wavelength Shift; nm 2.8 2.4 2 1.6 1.2 0.8 0.4 0 -0.4 10 8 6 4 2 0 -2 -4 -0.8 -6 -1.2 0 10 20 30 40 50 0 10 20 30 40 50 Forward Current; mA Forward Current; mA 5 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 6 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Power DomiLED • InGaN : DWx-LJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 7 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Recommended Solder Pad 8 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 9 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Packaging Specification 10 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 11 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 26/06/2014 V5.0 DOMINANT TM InGaN : DWx-LJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 22 Mar 2010 3 Typo error on IV group: V2 --> V1 06 Sep 2010 4 Typo error on graph: Relative Intensity Vs Forward Current Update Operating Temperature and Storage Temperature 19 Aug 2013 1 Update product photo 13 Dec 2013 2, 3 Add Thermal Resistance and Characteristics 26 Jun 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 26/06/2014 V5.0 DOMINANT TM Opto Technologies InGaN : DWx-LJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM