MPS ADC225 1w, high isolation sip, single & dual output dc/dc converter Datasheet

ADC200 SERIES
1W, High Isolation SIP, Single & Dual Output DC/DC Converters
Selection Guide
Model
Number
The ADC200 series is an excellent
selection for a variety of applications
including distributed power
systems, mixed analog/digital
subsystems, portable test
equipments, local power networks
and battery backed systems.
2.54 [0.100]
2.1 [0.08]
18.5 [0.73]
1
2
5
6
0.50 [0.020]
7
Load
Regulation
% Max.
10
10
8
7
7
10
8
7
7
8
8
5
5
5
8
5
5
5
8
8
5
5
5
8
5
5
5
% Typ.
73
71
76
78
78
72
77
78
79
74
73
78
80
80
74
79
81
81
73
71
76
78
79
72
76
79
80
Pin
Singles
Duals
1
2
5
6
7
+Vin
-Vin
-Vout
No Pin
+Vout
+Vin
-Vin
-Vout
Common
+Vout
Case Size –
5V & 12V Input – 19.5x6.1x10.2mm
(0.77x0.24x0.40inch)
24V Input –19.5x7.1x10.2mm
(0.77x0.28x0.40inch)
Case Material –
Non-Conductive Black Plastic
Weight –
5V & 12V Input – 2.2g (0.08Oz)
24V Input– 2.6g (0.09Oz)
Tolerance
Millimeters
X.X±0.25
X.XX±0.13
Inches
X.XX±0.01
X.XXX±0.005
Pin
±0.05
±0.002
T= 6.1 (0.24) for 5V & 12V Input Models
T= 7.1 (0.28) for 24V Input Models
Efficiency
Pin Connections
19.5 [0.77]
3.2 [0.13]
The series consists of 27 models
with input voltages of 5V, 12V and
24VDC which offers standard output
voltages of 3.3V, 5V, 9V, 12V, 15V,
±5V, ±9V, ±12V and ±15VDC for a
wide choice.
Mechanical Dimensions
T
MPS Industries ADC200 1W
DC/DC's are specially designed
to provide high levels of isolation
3000VDC in a miniature SIP
package.
24
(21.6 – 26.4)
Output
Current
mA
260
200
110
84
67
±100
±56
±42
±34
260
200
110
84
67
±100
±56
±42
±34
260
200
110
84
67
±100
±56
±42
±34
10.2 [0.40]
•
•
•
12
(10.8 – 13.2)
0.5 [0.02]
•
Efficiency up to 81%
3000VDC Isolation
MTBF > 2,000,000 Hours
Low Cost
Input 5, 12 and 24VDC
Output 3.3, 5, 9, 12, 15,
±5, ±9, ±12 and ±15VDC
Temperature Performance
-40°C to +85°C
UL 94V-0 Package Material
Internal SMD Construction
Industry Standard Pinout
5
(4.5 – 5.5)
1.3 [0.05]
•
•
•
•
•
•
ADC201
ADC202
ADC203
ADC204
ADC205
ADC206
ADC207
ADC208
ADC209
ADC211
ADC212
ADC213
ADC214
ADC215
ADC216
ADC217
ADC218
ADC219
ADC221
ADC222
ADC223
ADC224
ADC225
ADC226
ADC227
ADC228
ADC229
Output
Voltage
VDC
3.3
5
9
12
15
±5
±9
±12
±15
3.3
5
9
12
15
±5
±9
±12
±15
3.3
5
9
12
15
±5
±9
±12
±15
0.25 [0.010]
Key Features
Input
Voltage
VDC
2463 208th Street, Ste. 205
Tel: (310) 533-1455
http://www.mpsind.com
Torrance, CA 90501
Fax: (310) 533-1853
E-mail: [email protected]
ADC200 SERIES
1W, High Isolation SIP, Single & Dual Output DC/DC Converters
Absolute Maximum Ratings
Parameter
General Characteristics
Min.
5VDC Input Models
Max. Units
-0.7
9
VDC
Input Surge Voltage
12VDC Input Models
(1000mS)
-0.7
18
VDC
24VDC Input Models
-0.7
30
VDC
Lead Temperature
(1.5mm from case for 10sec.)
---
260
°C
Internal Power Dissipation
---
450
mW
Parameter
Isolation
Voltage
Isolation
Resistance
Isolation
Capacitance
Conditions
Min.
Typ.
Max.
Units
60 Seconds
3000
---
---
VDC
500VDC
10
---
---
GΩ
100kHz, 1V
---
60
100
pF
70
100
120
kHz
2
---
---
MHrs
Min.
Typ.
Max.
Units
---
±1.2
±1.5
%
Switching
Frequency
MIL-HDBK-217F
@25°C
Ground Benign
Exceeding the unit absolute maximum ratings could cause damage.
These are not continuous operating ratings.
MTBF
Environmental Characteristics
Output Characteristics
Parameter
Conditions
Min.
Ambient
-40
85
°C
Line Regulation
Case
-40
90
°C
Load Regulation
-40
125
°C
Ripple & Noise
--95
Free-Air Convection
%
Short Circuit
Operating
Temperature
Operating
Temperature
Storage
Temperature
Humidity
Cooling
Max. Units
Parameter
Conditions
For Vin Change of
1%
See Selection Guide
Io = 20% to 100%
20MHz BW
---
65
100
%
mV P-P
0.5 Second Max.
Maximum Capacitive Load
Derating Curve (3.3, 5 & ±5V Outputs)
100
100LFM
200LFM
Natural
convection
400LFM
Output Power (%)
80
60
40
20
0
¡ã
-40
50
70
60
90
80
Ambient Temperature
100
110
]
Derating Curve (Other Outputs)
100
100LFM
400LFM
200LFM
Output Power (%)
80
Models by Output Voltage
(Each Output on Duals)
Singles
Duals
Units
220
100
uF
Notes:
1. Specifications typical at Ta=+25°C, resistive load, nominal input
voltage, rated output current unless otherwise noted.
2. These power converters require a minimum output load to maintain
specified regulation.
3. Operation under no-load conditions will not damage these modules;
however, they may not meet all specifications listed.
4. All DC/DC converters should be externally fused at the front end for
protection.
5. Other input and output voltage may be available, please contact
factory.
6. All specifications subject to change without notice.
7. For detailed data sheet, please visit our website.
60
Natural
convection
40
20
0
¡ã
-40
50
60
70
80
Ambient Temperature
90
100
110
]
2463 208th Street, Ste. 205
Tel: (310) 533-1455
http://www.mpsind.com
Torrance, CA 90501
Fax: (310) 533-1853
E-mail: [email protected]
Similar pages