4 TYPE Multilayer Chip Inductors LL1005FHL Meeting Your Needs The LL1005-FHL Series is a multilayer ceramic chip inductor with an EIA standard 0402 footprint, lead-free terminations, and expanded electrical specifications with respect to inductance, Q, self-resonant frequency, and operating temperature range. W L T A Unit: mm Polarity Marking 1nH~68nH 82nH~100nH Features L (mm) 1.0±0.05 1.0±0.1 W (mm) 0.5±0.05 0.5±0.1 T (mm) 0.5±0.05 0.5±0.1 A (mm) 0.25±0.1 0.25±0.1 Part Numbering • Inductance range: 1.0-100nH • Miniature size: 0402 footprint (1.0mm x 0.5mm) • Inductance specified at 100MHz and 800MHz • Self-resonant frequency specified at ±15% • Q: 8 ~ 50 typical (at 1800MHz) • Temperature coefficient of inductance: +250ppm/°C • Temperature range: –55°C to +125°C • S-parameter data available upon request • Packaged on tape and reel in 10,000 piece quantity • Reflow solderable • Lead-free terminations LL 1005 - FHL 10N J Tolerance (S=±0.3nH, J=±5%) Inductance Material Dimensions (LxW) Type Name STANDARD PARTS SELECTION GUIDE TYPE LL1005-FHL Inductance & Tolerance TOKO Part Number at 100MHz Q min. at 800 (500) MHz Q (Typ.) SRF (MHz) RDC (Ω) max. IDC (mA) max. Lo (nH) L Tol.* Lo (nH) L Tol.* Freq. (MHz) 100 MHz 100 MHz 300 MHz 500 MHz 800 MHz 1000 MHz 1800 MHz LL1005-FHL1N0S 1.0 S 0.93 ± 0.5nH 800 7 8.7 15.5 21.0 25.5 31.5 42.5 20000 min 0.10 400 LL1005-FHL1N2S 1.2 S 1.1 ± 0.5nH 800 7 9. 0 16.5 21.0 27.2 31.0 42.5 16000 min 0.10 400 LL1005-FHL1N5S 1.5 S 1.4 ± 0.5nH 800 8 9.6 17.5 22.5 28.1 31.5 44.0 15000 ± 15% 0.13 400 LL1005-FHL1N8S 1.8 S 1.7 ± 0.5nH 800 8 9.0 16.5 21.0 26.7 30.0 40.5 15000 ± 15% 0.14 400 LL1005-FHL2N2S 2.2 S 2.0 ± 0.5nH 800 8 10.0 17.5 23.0 29.6 33.0 44.5 13000 ± 15% 0.15 400 LL1005-FHL2N7S 2.7 S 2.5 ± 0.5nH 800 8 9.9 18.0 24.0 30.3 35.0 49.0 9600 ± 15% 0.15 400 LL1005-FHL3N3S 3.3 S 3.1 ± 0.5nH 800 8 9.7 17.0 23.0 28.5 33.5 47.5 9100 ± 15% 0.16 400 LL1005-FHL3N9S 3.9 S 3.7 ± 0.5nH 800 8 9.9 18.5 24.5 29.2 35.5 50.0 7400 ± 15% 0.18 300 LL1005-FHL4N7S 4.7 S 4.4 ± 0.5nH 800 9 10.2 18.0 23.0 30.3 33.0 42.5 7000 ± 15% 0.20 300 LL1005-FHL5N6S 5.6 S 5.3 ± 0.5nH 800 9 10.7 18.5 24.5 31.7 34.0 44.0 6100 ± 15% 0.22 300 LL1005-FHL6N8J 6.8 J 6.5 ± 10% 800 9 10.8 18.5 24.0 31.3 34.5 43.0 5600 ± 15% 0.23 300 LL1005-FHL8N2J 8.2 J 7.9 ± 10% 800 9 11.3 20.0 26.0 33.1 37.0 46.0 4700 ± 15% 0.25 300 LL1005-FHL10NJ 10 J 9.7 ± 10% 800 9 11.1 19.0 25.0 32.0 35.0 43.0 4300 ± 15% 0.30 300 LL1005-FHL12NJ 12 J 12 ± 10% 800 9 11.8 19.5 25.0 31.8 34.0 34.0 3300 ± 15% 0.40 300 LL1005-FHL15NJ 15 J 15 ± 10% 800 9 12.4 19.0 24.0 32.0 32.0 30.0 2800 ± 15% 0.50 300 LL1005-FHL18NJ 18 J 18 ± 10% 800 10 12.0 18.5 23.5 31.5 30.5 27.5 2800 ± 15% 0.60 300 LL1005-FHL22NJ 22 J 23 ± 10% 800 10 11.9 18.5 23.0 30.3 28.5 18.5 2500 ± 15% 0.70 300 LL1005-FHL27NJ 27 J 30 ± 10% 800 10 12.4 19.0 24.0 29.2 26.5 8.0 2100 ± 15% 0.85 300 LL1005-FHL33NJ 33 J 36 ± 10% 800 10 12.0 16.5 21.0 28.6 25.0 13.0 2100 ± 15% 1.00 200 LL1005-FHL39NJ 39 J 44 ± 10% 800 10 12.0 17.0 21.5 27.6 25.0 10.5 1900 ± 15% 1.10 200 LL1005-FHL47NJ 47 J 50 ± 10% 500 10 11.5 15.5 19.7 21.7 22.2 — 1500 ± 15% 1.30 200 LL1005-FHL56NJ 56 J 60 ± 10% 500 10 11.9 19.5 23.4 22.6 17.8 — 1400 ± 15% 1.50 200 LL1005-FHL68NJ 68 J 77 ± 10% 500 10 11.7 17.9 20.3 20.8 — — 1300 ± 15% 1.70 180 LL1005-FHL82NJ 82 J 95 ± 10% 500 10 13.1 19.1 21.8 21.4 — — 1150 ± 15% 1.90 150 LL1005-FHLR10J 100 J 122 ± 10% 500 10 13.2 19.1 20.0 18.8 — — 1030 ± 15% 2.20 150 * Add tolerance to part number: S=±0.3nH, J = ±5% Testing Conditions: (1) L,Q: Agilent 4291A/B (Test fixture Agilent 16192A) 1.800.PIK.TOKO www.tokoam.com (2) SRF: Agilent 8719D, 8720D 1.847.297.0070 (3) RDC: Agilent 4338A/B R-LOG0703A TYPE Multilayer Chip Inductors LL1005FHL Meeting Your Needs 5 ELECTRICAL CHARACTERISTICS Q vs. Frequency Q vs Frequency 200 FH1N5 Q 150 100 FH2N7 50 FH5N6 FH10N FH15N FH27N 0 10 1000 100 10000 Frequency (MHz) Inductance vs. Frequency Inductance vs Frequency Inductance (nH) 1000 100 FH27N FH15N FH10N FH5N6 10 FH2N7 FH1N5 1 10 1000 100 10000 Frequency (MHz) R-LOG0703A 1.800.PIK.TOKO www.tokoam.com 1.847.297.0070