MIL-C 26482G Series II Description Applications • Standard version • Aluminum alloy olive green, nickel or, black, anodized plating • Bayonet coupling • RFI shielding plug • Gold plating crimp contacts # 20, 16, and # 12 • # 16 and # 12 minicoaxial or thermocouple contacts • Hermetic version available • Light weight backshells For all general purposes in military applications Standards MIL-C 26482 Series II QPL approved Climatical Characteristics Electrical Mechanical • Max. current rating per contact • Endurance : 500 operations • Plug MS 3475 : 250 operations • Plug MS 3476 : 500 operations • Shock : 300 g - 3 ms in three axes • Vibration : MIL STD 202, method 214, test condition II, letter J (50 - 2000Hz; 41,7 g eff.) • Contact retention in insert : - size 20 : 90 N - size 16 : 111 N - size 12 : 133 N size 20 size 16 size 12 environmental class 7,5 A 13 A 23 A hermetic class 5A 10 A 17 A • Contact resistance size 20 size 16 size 12 environmental class ≤ 1 mΩ ≤ 0,55 mΩ ≤ 0,35 mΩ hermetic class ≤ 7 mΩ ≤ 3,8 mΩ ≤ 2,4 mΩ • Insulation resistance : ≥ 5000 MΩ at 500 Vdc • Dielectric withstanding voltage Service at ground level at 21000 m I 1500 Vrms 375 Vrms • Operating temperature : -55°C to + 200°C (class L) -55°C to + 175°C (classes W and H) • Damp heat : MIL STD 1344 method 1002 - Type II • Salt spray : class W : 500 hr class L : 48 hr • Leakage : environmental version : - when mated under a differential pressure of 1,03 bar. air leakage is ≤ 3,6 mm3/h - low pressure immersion : 33 mbar hermetic version : - differential pressure of 1 bar air'helium, leakage is ≤ 2,8 mm3/h Resistance to fluids II 2300 Vrms 550 Vrms • Shell continuity with plug MS 3475, environmental receptacle ≤ 5 mΩ, hermetic receptacle ≤ 50 mΩ MIL-L 7808 MIL-L 23699 MIL-H 5606 Hydraulic fluids M 2 V MIL-C 25769 diluted MIL-A 8243 MIL-T 5624 (JP5) MIL-G 3056 Solvents Ordering information environmental connectors MS basic series shell type 3470 3474 3475 3476 - square flange receptacle - jam nut receptacle - RFI shielded plug - plug class and plating W - olive green cadmium L - nickel shell size 8-10-12-14-16-18-20-22-24 contact layout - see table p 65 contact type P S A B - male contact female contact less male contact less female contact polarization N - normal ( not included in part number) W, X, Y and Z - see table p 66 56 3470 W •• •• P • MIL-C 26482G Series II Hermetic connectors MS basic series 3440 H •• C •• P • shell type 3440 - square flange receptacle 3443 - solder fixing receptacle 3449 - jam nut receptacle class H - hermetic shell size 8-10-12-14-16-18-20-22-24 materials and terminal C - steel, solder bucket contact layout see table p 65 contact type male only polarization N - normal (not included in part number) W, X, Y and Z - see table p 66 Backshells Backshell type A Plating W N MIL-C 26482G Series II • Backnut M85049-31-••A M85049-31-••W M85049-52-1••A M85049-52-1••W M85049-51-1••A M85049-51-1••W M85049-60-1A•• M85049-60-1W•• - • • Straight cable clamp • • • Elbow cable clamp • • • Straight backshell for heatshrink sleeving • • • Backnut for heatshrink sleeving • • • A - black anodized SOURIAU W - olive green cadmium 852-31A•• 852-31W•• 852-31N•• 852-52A•• 852-52W•• 852-52N•• 852-51A•• 852-51W•• 852-51N•• 852-60A•• 852-60W•• 852-60N•• 852-57A•• 852-57W•• 852-57N•• N - nickel Example : M85049-31-8A 852-31A08 shell size Cross reference list Part number cross reference list SOURIAU and MIL-C 26482G Series II MIL-C 26482G Series II SOURIAU MS3470 W••-•• P MS3470 W••-•• A MS3470 W••-•• S MS3470 W••-•• B MS3474 W••-•• P MS3474 W••-•• A MS3474 W••-•• S MS3474 W••-•• B MS3475 W••-•• P 8526-0W••-•• P 8526-0W••-•• P 8526-0W••-•• S 8526-0W••-•• S 8526-7W••-•• P 8526-7W••-•• P 8526-7W••-•• S 8526-7W••-•• S 8526-5W••-•• P ■ ■ ■ ■ ■ ■ ■ ■ ■ Designation ■ ■ ■ ■ ■ ■ ■ ■ ■ L L L L square flange receptacle with male contacts square flange receptacle less male contacts square flange receptacle with female contacts square flange receptacle less female contacts jam nut receptacle with male contacts jam nut receptacle less male contacts jam nut receptacle with female contacts jam nut receptacle less female contacts BFI shielded plug with male contacts 57 MIL-C 26482G Series II 58 MIL-C 26482G Series II FCI Souriau MS3475 W ••-•• A MS3475 W ••-•• S MS3475 W ••-•• B MS3476 W ••-•• P MS3476 W ••-•• A MS3476 W ••-•• S MS3476 W ••-•• B MS3470 L ••-•• P MS3470 L ••-•• A MS3470 L ••-•• S MS3470 L ••-•• B MS3474 L ••-•• P MS3474 L ••-•• A MS3474 L ••-•• S MS3474 L ••-•• B MS3475 L ••-•• P MS3475 L ••-•• A MS3475 L ••-•• S MS3475 L ••-•• B MS3476 L ••-•• P MS3476 L ••-•• A MS3476 L ••-•• S MS3476 L ••-•• B 8526-5W ••-•• P 8526-5W ••-•• S 8526-5W ••-•• S 8526-6W ••-•• P 8526-6W ••-•• P 8526-6W ••-•• S 8526-6W ••-•• S 8526-0L ••-•• P 8526-0L ••-•• P 8526-0L ••-•• S 8526-0L ••-•• S 8526-7L ••-•• P 8526-7L ••-•• P 8526-7L ••-•• S 8526-7L ••-•• S 8526-5L ••-•• P 8526-5L ••-•• P 8526-5L ••-•• S 8526-5L ••-•• S 8526-6L ••-•• P 8526-6L ••-•• P 8526-6L ••-•• S 8526-6L ••-•• S ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Designation ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ L L L L L L L L L L L L RFI shielded plug less male contacts RFI shielded plug with female contacts RFI shielded plug less female contacts plug with male contact plug less male contact plug with female contact plug less female contact square flange receptacle with male contacts square flange receptacle less male contacts square flange receptacle with female contacts square flange receptacle less female contacts jam nut receptacle with male contacts jam nut receptacle less male contacts jam nut receptacle with female contacts jam nut receptacle less female contacts RFI shielded plug with male contacts RFI shielded plug less male contacts RFI shielded plug with female contacts RFI shielded plug less male contacts plug with male contact plug less male contact plug with female contact plug with less female contact MS3440 H •• C •• P ■ MS3443 H •• C •• P ■ MS3449 H •• C •• P ■ 8526-2H ••-•• P ■ 8526-1H ••-•• P ■ 8526-7H ••-•• P ■ hermetic square flange receptacle hermetic solder fixing receptacle hermetic jam nut receptacle M85049/31- •• W M85049/52-1- •• W M85049/51-1- •• W M85049/60-1W- •• M85049/60-2G- •• A M85049/31- •• A M85049/52-1- •• A M85049/51-1- •• A M85049/60-1A •• M85049/60-2G- •• A M85049/31- •• N M85049/52-1- •• N M85049/51-1- ••N M85049/60-1N •• M85049/60-2G- •• N 852-31W •• 852-52W •• 852-51W •• 852-60W •• *852-57W •• 852-31A •• 852-52A •• 852-51A •• 852-60A •• *852-57A •• *852-31N •• *852-52N •• *852-51N •• *852-60N •• *852-57N •• backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving backnut straight cable clamp elbow cable clamp backshell for heatshrink sleeving backnut for heatshrink sleeving M39029/4-110 M39029/4-111 M39029/4-113 M39029/5-115 M39029/5-116 M39029/5-118 8522-2253A 8522-330A 8522-331A 8520-289 8522-486A 8522-487B M39029/9-135 M39029/9-134 M39029/10-141 M39029/10-140 *8522-875A *8522-876A *8522-877A *8522-878A M39029/8-001 M39029/7-001 *8522-12-1-001 *8522-12-2-001 male contact ≠ 20 male contact ≠ 16 male contact ≠ 12 female contact ≠ 20 female contact ≠ 16 female contact ≠ 12 thermocouple contacts male-chromel ≠ 20 male-alumel ≠ 20 female-chromel ≠ 20 female-alumel ≠ 20 coax contacts ≠ 12 female for RG178B/U cable male for RG178B/U cable MS27488-20 MS27488-16 MS27488-12 M81969-14-02 M81696-14-03 M81696-14-04 8522-389A 8522-390A 8522-391A 8522-20 8522-16 8522-12 filler plug ≠ 20 filler plug ≠ 16 filler plug ≠ 12 plastic tool for contact ≠ 20 plastic tool for contact ≠ 16 plastic tool for contact ≠ 12 MIL-C 26482G Series II Contacts layouts viewed from front face of male insulator Shells 08 10 12 14 16 18 20 22 24 8-33* 10-6* 12-10* 14-19* 16-26* 18-32* 20-41* 22-55* 24-61* 3 # 20 6 # 20 10 # 20 19 # 20 26 # 20 32 # 20 41 # 20 55 # 20 61 # 20 8-98* 12-3* 14-15* 16-8* 18-11 20-39* 22-41* 24-31 3 # 20 3 # 16 14 # 20 1 # 16 8 # 16 11 # 16 37 # 20 2 # 16 27 # 20 14 # 16 31 # 16 14-12* 18-8* 20-16* 22-21* 24-19 8 # 20 4 # 16 8 # 12 16 # 16 21 # 16 19 # 12 14-5* 22-12 5 ≠ 16 12 # 12 14-4* * hermetic receptacle available not QPL to date 4 # 12 59 MIL-C 26482G Series II Polarization shell size Insulator rotated inside metal body 8 10 12 N 14 Z 16 W 18 Y 20 X 22 24 number of contacts service I service II size 20 size 16 size 12 contacts layouts 8-33 8-96 10-6 12-10 12-3 14-19 14-15 14-12 14-5 14-4 16-26 16-8 18-32 18-11 18-8 20-41 20-39 20-16 22-55 22-41 22-21 22-12 24-61 24-31 24-19 Ø1 3 3 6 10 X X X X X X X X X 1 4 5 4 26 X X 8 32 X X X X 11 8 41 37 X X X 55 27 X X X X 2 16 14 21 12 61 31 X Contacts Ø2,4 3 19 14 8 X X Ø1,6 19 N angles in degrees W X Y 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 90 90 60 30 17 43 40 45 60 54 85 62 180 45 63 238 30 39 16 90 90 30 155 165 110 90 92 152 138 119 126 144 318 142 135 135 180 225 165 270 180 315 155 184 275 180 222 241 225 252 333 226 264 175 270 255 315 Z 295 234 273 338 331 265 340 333 347 314 349 324 - Minicoax contacts installed instead of size 16 contacts Contacts size 20 (Ø1mm) 16 (Ø1.6mm) 12 (Ø2.4mm) male contacts Cable accommodation (admissible section) external Ø over insulator 0,98/2,11 mm 1,34/2,62 mm 2,45/4,01 mm admissible section 0,21/0,60 mm 0,60/1,34mm 1,91/3,18mm 24/20 20/16 14/12 0,09/0,21 mm2 - - 28/24 - - wire gauge reducting sleeve for wire of 2 2 colour code M39029/4-110 brown-brown-black M39029/4-111 colour code 8526-2-003 A 8526-1-001 A 8526-1-002 A 8526-1-003 A RG-316U-KX 22 A RG-178 B/U-KX 21 A RG 179 B/U M39029/4-112 brown-brown-brown brown-brown-orange cables accepted - female contacts 8526-2-002 A female contacts part numbers - male contacts 8526-2-001 A 2 M39029/5-115 M39029/5-116 M39029/5-118 brown-brown-green brown-brown-blue brown-brown-grey Coax contacts installed instead of size 12 contacts - male contacts chromel thermocouple colour code - alumel thermocouple colour code 8522-875 A 8522-881 8522-887 brown-orange-green yellow yellow 8522-876 A 8522-882 8522-888 brown-orange-yellow black black 8522-877 A 8522-883 8522-889 brown-yellow-brown yellow yellow 8522-878 A 8522-884 8522-890 brown-yellow-black black black - female contacts chromel thermocouple colour code - alumel thermocouple colour code reducing sleeve 60 male contacts 8526-12-2-001 8526-12-2-002 8526-12-2-003 8526-12-2-004 female contacts 8522-2142 8526-12-1-001 8526-12-1-002 8526-12-1-003 8526-12-1-004 cables accepted RG 178 B/U RG 179 B/U RG 316 U RG 180 B/U - MIL-C 26482G Series II Dimensions backnut type 31 ØC Backshells ØB Plug MS3475 and MS3476 12,85 Max D Plug backshell assembly overall length ØA 14 16 18 20 22 24 shells 08 10 12 14 16 18 20 22 24 shells 6.75 36.5 .616 .266 1.437 22.65 18.6 9.4 36.5 .892 .732 .370 1.437 25.75 21.75 12.8 1.014 .856 .504 24.95 14.75 36.5 1.171 32.95 1.297 35.35 1.392 38.75 1.526 41.85 .982 E Max F Max G Max H Max 3.2 5.2 19.1 22.65 46.1 .126 .205 .752 .892 1.815 4.75 7.25 21.1 .187 .285 .831 .963 2.669 36.5 7.4 10.6 25.1 27.85 51.3 1.014 .856 .504 1.437 .291 .417 8.9 12.1 26.6 27.85 51.3 2.394 24.45 47.59 .581 1.437 .350 .476 1.047 1.096 28.2 17.93 36.5 12.75 15.9 33.5 30.85 54.3 1.110 1.437 .502 .626 1.319 1.215 2.138 30.9 19.94 36.5 13.15 17.9 36.9 37.85 60.8 1.217 1.437 .518 .705 1.453 1.490 2.394 .706 .785 34.15 23.11 1.344 .910 36.5 14.75 21.1 39.5 40.45 63.9 1.437 .581 .831 1.555 1.593 2.516 37.25 26.29 1.648 1.467 45.05 40.45 1.774 1.593 J Max K min 20.5 3.2 36.5 16.35 24.3 42 44.35 67.8 1.437 .644 .957 1.654 1.746 2.669 29.2 36.5 17.95 27.5 45.1 46.75 70.2 1.150 1.437 .707 1.083 1.776 1.841 2.764 K Max L Max M Max N mini O Max 5.2 27.6 52.2 6.75 1.035 P Q Max 13.5 3.3 10.6 .807 .126 .205 1.087 2.055 .266 .531 .130 .417 22 4.75 7.25 29.3 53.9 9.4 15.35 3.3 10.6 .866 .185 .285 1.154 2.122 .370 .604 .130 .417 23.6 7.4 10.6 31.9 56.5 12.8 19.65 3.3 10.6 .929 .291 .417 1.256 2.224 .504 .774 .130 .417 25.2 8.9 12.1 33.4 58 14.75 21.25 3.3 10.6 .992 .350 .476 1.315 2.283 .581 .837 .130 .417 10.6 26.8 12.75 15.9 37.3 61.9 17.93 24.45 3.3 1.055 .502 .626 1.469 2.437 .706 .963 .130 .417 31.3 13.15 17.9 38.7 63.3 19.94 26.45 3.3 10.6 1.232 .518 .705 1.524 2.492 .785 1.041 .130 .417 32.9 14.75 21.1 40.25 64.9 23.11 30.9 3.3 10.6 1.295 .581 .831 1.585 2.555 .910 1.217 .130 .417 34.5 16.35 24.3 41.9 66.5 26.29 34.4 3.3 10.6 1.358 .644 .957 1.650 2.618 1.035 1.354 .130 .417 36.1 17.95 27.5 43.5 68.1 29.2 36.65 3.3 10.6 1.421 .707 1.083 1.713 2.681 1.150 1.443 .130 .417 W Max X Max Y Max R Max S Max T Max U Max V 28.55 52 13.72 6.75 17.48 3.3 10.5 37.4 1.124 2.047 .540 .266 .688 .130 .413 1.472 28.55 52 13.72 9.4 20.4 3.3 10.5 37.4 1.124 2.047 .540 .370 .803 .130 .413 1.472 28.55 52 13.72 12.8 23.83 3.3 10.5 37.4 1.124 2.047 .540 .504 .938 .130 .413 1.472 28.55 52 13.72 14.75 27 3.3 10.5 37.4 1.124 2.047 .540 .581 1.063 .130 .413 1.472 28.55 52 13.72 17.93 31.45 3.3 10.5 37.4 1.124 2.047 .540 .706 1.238 .130 .413 1.472 28.55 52 13.72 19.94 33.27 3.3 10.5 37.4 1.124 2.047 .540 .785 1.310 .130 .413 1.472 28.55 52 13.72 23.11 36.47 3.3 10.5 37.4 1.124 2.047 .540 .910 1.436 .130 .413 1.472 28.55 52 13.72 26.29 39.62 3.30 10.5 37.4 1.124 2.047 .540 1.035 1.560 .130 .413 1.472 28.55 52 13.72 29.2 42.82 3.3 10.5 37.4 1.124 2.047 .540 1.150 1.686 .130 .413 1.472 Straight cable clamp type 52-1 G H elbow cable clamp type 51-1 Ø for flange ØK L M R for heatshrink sleeving type 60-1 P 10 12 14 16 18 20 22 24 Q S T backnut for heatshrink sleeving type 60-2 ØU 08 F 15.65 .746 E min ØE 18.95 29.75 D Max ØV 12 C J 10 B Max ØN 08 A ØO shells Ø for flange D, H, M, S et Y W X Y 61 MIL-C 26482G Series II Environmental square flange receptacle MS3470 1,55 Max E C D E A B Max Max Max Max Max ØA shells 08 E 10 C 12 with backnut D 14 panel cut-out 16 F ØG F K J mounted from front of panel 18 mounted from rear of panel 1.95 11.7 36.5 .474 .077 .461 1.437 15.01 1.95 11.7 36.5 .591 .077 .461 1.437 19.07 1.95 11.7 36.5 21 15.09 14.43 J K Max Max 3.05 3.17 .594 .568 .120 .125 .087 24.2 18.26 17.4 3.05 3.17 2.21 .827 .953 .719 2.21 .685 .120 .125 .087 26.55 20.62 21.95 3.05 3.17 2.21 .077 .461 1.437 1.045 .864 .120 .125 .087 1.95 11.7 36.5 28.9 23.01 25.12 3.05 3.17 2.21 .812 .876 .077 .461 1.437 1.138 .989 .120 .125 .087 25.42 1.95 11.7 36.5 31.3 24.61 28.27 3.05 3.17 2.21 .906 1.001 .077 .461 1.437 1.232 1.113 .120 .125 .087 28.6 1.95 11.7 36.5 33.7 26.97 31.45 3.05 3.17 2.21 .077 .461 1.437 1.327 1.238 .120 .125 .087 2.75 14.35 38.1 36.9 29.36 34.62 3.05 3.17 5.38 .565 1.500 1.453 2.75 14.35 38.1 1.251 .108 34.95 24 H .751 1.126 22 G 22.25 31.77 20 ØH 12.03 F .969 1.062 1.156 1.363 .120 .125 .212 40 31.75 37.8 3.05 3.17 5.38 1.376 .108 .565 1.500 1.575 1.488 .120 .125 .212 38.12 2.75 15.2 38.1 43.3 34.92 41.02 1.250 3.73 3.17 5.38 1.501 .108 .598 1.500 1.705 .147 .125 .212 1.375 1.615 Environmental jam nut receptacle MS3474 shells 8 E ØA B 10 ØF C D 12 with backnut 14 panel cut-out 16 18 J H ØG 20 22 24 A Max B Max C Max D Max E Max 12.03 2.51 .474 .099 15.01 2.51 F Max G H J Max 17.55 36.5 .691 1.437 24.05 27.2 14.53 13.61 4.75 .947 1.071 .572 .536 17.55 .187 36.5 27.2 30.4 17.7 16.79 4.75 1.071 1.197 .697 .661 .187 32 35.15 22.73 20.93 4.75 .591 .099 .691 1.437 19.07 2.51 17.55 36.5 .751 .099 .691 1.437 22.25 2.51 17.55 36.5 1.384 .895 .824 .187 35.15 38.35 1.260 25.65 24.08 4.75 .876 .099 .691 1.437 1.384 1.510 1.010 .948 .187 25.42 2.51 17.55 36.5 38.35 41.5 28.83 27.23 4.75 1.001 .099 .691 1.437 1.510 1.634 1.135 1.072 .187 28.6 2.51 17.55 36.5 41.5 44.7 32 30.4 4.75 1.634 1.760 1.260 1.197 .187 46.25 49.45 35.18 33.58 6.35 1.126 .099 .691 1.437 31.77 3.3 19.15 38.1 1.251 .130 .754 1.500 1.821 1.947 1.385 1.322 .250 34.95 3.3 19.15 38.1 49.45 52.6 38.35 36.75 6.35 1.376 .130 .754 1.500 1.947 2.071 1.510 1.447 .250 38.12 3.3 19.15 38.1 52.6 55.8 41.53 39.93 5.55 1.501 .130 .754 1.500 2.071 2.197 1.635 1.572 .219 Square flange hermetic receptacle MS3440 B shells C max F ØA 8 10 D E 12 F 14 panel cut-out G ØH G L K 62 D E F Max Max Max 12.05 19.8 15.05 1.95 .474 18 1.126 20 24 .593 – 4.5 .077 15.05 1.95 .593 .077 G H J 21 15.1 14.7 3.15 .827 .594 .612 .124 24.2 18.26 17.5 3.15 .953 .719 .740 .124 6.3 15.05 1.95 26.55 20.62 20.2 3.15 .248 .593 .077 1.045 .812 .872 .124 6.3 15.05 1.95 28.95 23.01 23.4 3.15 .248 .593 .077 1.140 .906 .996 .124 6.3 15.05 1.95 31.3 24.61 26.6 3.15 .248 1.232 .593 .077 .969 1.120 .124 6.3 15.05 1.95 33.7 26.97 28.8 3.15 .248 .593 1.327 1.062 1.246 4.5 6.3 16.6 2.4 .825 .181 .248 .654 .094 3.7 5.45 34.95 21.8 .077 16.6 2.4 .219 .654 .094 3.7 5.45 16.6 .858 .146 38.1 21.8 1.500 4.5 .780 .177 31.75 20.95 1.376 4.5 .780 .177 28.6 19.8 1.250 4.5 .780 .177 25.4 19.8 1.000 4.5 .780 .177 22.25 19.8 .876 – .780 .177 19.05 19.8 .750 4.5 .780 .177 15 19.8 .591 16 22 ØJ A B C Max Max Max # 20 ## 12 16 .858 .146 .219 .654 36.9 29.36 32.1 3.15 1.453 1.156 1.370 .124 40.1 31.75 35.3 3.15 1.579 1.250 1.496 2.4 43.25 34.92 38.4 .094 .124 1.703 1.375 1.622 .124 K L Max Max 3.2 3 .126 .118 3.2 3 .126 .118 3.2 3 .126 .118 3.2 3 .126 .118 3.2 3 .126 .118 3.2 3 .126 .118 3.2 5.4 .126 .213 3.2 5.4 .126 .213 3.3 3.2 5.4 .130 .126 .213 MIL-C 26482G Series II Jam nut hermetic receptacle MS3449 B C max shells E ØA 8 10 12 ØF D 14 panel cut-out 16 J 18 ØA ØG 20 22 24 C Max A B Max Max # 20 12.05 20.73 3.4 .474 .816 .134 15 20.73 .591 .816 .134 19.05 20.73 .750 3.4 .816 .134 31.75 23.08 1.250 3.4 .816 .134 28.6 20.73 1.126 3.4 .816 .134 25.4 20.73 1.000 3.4 .816 .134 22.25 20.73 .876 3.4 # 12 # 16 17.91 27.34 30.52 17.75 16.95 1.57 4.75 24.2 27.34 14.6 13.75 1.57 4.75 .953 .705 1.076 1.076 1.202 .575 .699 .541 .062 .667 .062 .187 .187 5.2 17.91 32.12 35.29 22.5 20.99 1.57 4.75 .205 .705 1.265 1.389 .886 5.2 17.91 35.29 38.47 25.7 .205 .705 1.389 1.515 1.012 .846 .062 .187 24.2 1.57 4.75 .953 .062 .187 5.2 17.91 38.47 41.64 28.85 27.35 1.57 4.75 .205 .705 1.515 1.639 1.136 1.077 .062 .187 5.2 17.91 41.64 44.82 32.05 30.55 1.57 4.75 .205 .909 .098 .169 4.3 .909 .098 .169 3.55 .938 .069 .140 1.500 min Max – – .705 38.1 23.83 1.75 1.376 J H 17.91 4.3 2.5 G – – 2.5 34.95 23.08 D E F Max Max Max .705 1.639 1.765 1.262 19.5 46.39 49.59 35.2 .768 1.826 1.952 1.386 19.5 49.59 52.74 38.4 .768 1.952 2.076 1.512 1.203 .062 .187 33.7 1.57 6.35 1.327 .062 .250 36.9 1.57 6.35 1.453 .062 .250 19.5 52.74 55.92 41.55 40.05 1.57 6.35 .768 2.076 2.202 1.636 1.577 .062 .250 Solder mounted hermetic receptacle MS3443 B shells C G ØA 8 10 E D 12 ØF 14 panel cut-out 16 ØH soldering 18 20 22 24 Reusable fixing plate Two, three or four holes self locking fixing plates are available at SHTP. See page 677. C A Max B Max 12.05 19.5 4.5 .474 .768 .177 15 19.5 4.5 .591 .768 19.05 19.5 .750 22.25 .876 25.4 1.000 28.6 # 20 # 16 # 12 D Max E Max F Max G H 14.48 – – 15.1 1.1 16.1 14.27 .594 .043 .634 .562 .570 15.1 1.1 19.3 17.06 17.27 .177 – – .594 .043 .760 .672 .680 4.5 6.3 15.1 1.1 21.65 19.83 20.04 .768 .177 .248 .594 .043 .852 .781 .789 19.5 4.5 6.3 15.1 1.1 24.85 23.01 23.22 .768 .177 .248 .594 .043 .978 .906 .914 19.5 4.5 6.3 15.1 1.1 28 26.18 26.39 .768 .177 .248 .594 .043 1.102 1.031 1.039 19.5 4.5 6.3 15.1 1.1 31.15 29.36 29.57 1.126 .768 .177 .248 .594 .043 1.226 1.156 1.164 31.75 21.1 4.5 6.3 16.7 1.1 33.55 31.74 31.95 1.250 .831 .177 .248 .657 .043 1.321 1.250 1.258 34.95 22 3.7 5.5 16.7 1.1 36.75 34.92 35.13 1.376 .866 .146 .217 .657 .043 1.447 1.375 1.383 38.1 22 3.7 5.5 16.7 1.1 39.95 38.09 38.3 1.500 .866 .146 .217 .657 .043 1.573 1.500 1.508 gaskets shells gaskets square flange receptacle MS3470 and MS3440 (ordered separately) 0-ring jam nut receptacle MS3474 and MS3449 (spare 0-rings) 8 8525-1431 MS9068-016 10 8525-1432 MS9068-018 12 8525-1433 MS9068-021 14 8525-1434 MS9068-023 16 8525-1435 MS9068-025 18 8525-1436 MS9068-027 20 8525-1437 MS9068-029 22 8525-1438 MS9068-030 24 8525-1439 MS9068-031 63 MIL-C 26482G Series II Protective caps 852 basic series 28 R 10 cap type 28 - cap for plug 27 - cap for square flange receptacle 29 - cap for jam nut receptacle plating W - olive green cadmium N - nickel R - black anodized shell size 08-10-12-14-16-18-20-22-24 Caps for receptacle ØC ØA Type 27 ØA Type 29 ØD L1 L1 B B Caps for plug Shells A Max B Max C Max 19 14.25 14.8 8 .561 .583 .748 21.8 14.25 18 10 .858 .561 .709 ØE L2 F Dummy receptacle D E ØA 3.307 15 84 84 .138 .78 .591 3.307 3.307 3.5 23.9 15 100 100 .894 .138 .941 .591 3.937 3.937 14 29.3 14.25 25.9 3.5 27 15 100 100 1.154 .561 1.02 .138 1.063 .591 3.937 3.937 32.5 15 29 3.5 30.2 15 100 100 1.28 .591 1.142 .138 1.189 .591 3.937 3.937 35.3 15 32.2 3.5 33.4 15 100 100 1.39 .591 1.268 .138 1.315 .591 3.937 3.937 20 38.8 14.25 35.4 3.5 36.5 16.5 116 116 1.528 .561 1.394 .138 1.437 .65 4.567 4.567 22 42 15 38.6 3.5 39.8 16.5 116 116 1.654 .591 1.520 .138 1.567 .65 4.567 4.567 24 45.1 15.8 41.7 3.5 42.9 16.5 116 116 1.776 .622 1.642 .138 1.689 .65 4.567 4.567 8526-0708 8526-07N08 12 8526-0712 8526-07N12 14 8526-0714 8526-07N14 18 D .591 19.8 22.7 16 C .661 3.5 .561 8 E 3.307 .138 14.25 10 8526-07108526-07N10 B L2 84 26.1 Part number Shells olive green nickel 4ØF L1 84 1.028 18 ØD E Max F Max 16.8 15 12 16 Type 28 D 3.5 20 8526-0716 8526-07N16 8526-0718 8526-07N18 8526-0720 8526-07N20 22 8526-0722 8526-07N22 24 8526-0724 8526-07N24 A Max B Max C D Max E F 12.03 11.7 1.35 21 15.09 3.1 .474 15.01 .591 19.07 .751 22.25 .876 25.42 .461 .053 .827 .594 .122 11.7 1.35 24.2 18.26 3.1 .461 .053 .953 .719 .122 11.7 1.35 26.55 20.62 3.1 .461 .053 1.045 11.7 1.35 .461 .812 .122 29 23.01 3.1 .053 1.142 .906 .122 11.7 1.35 31.3 24.61 3.1 1.001 .461 28.6 11.7 1.35 33.7 26.97 3.1 .053 1.232 .969 .122 1.126 .461 .053 1.327 1.062 .122 31.77 14.35 2.15 36.9 29.36 3.1 1.251 .565 .085 1.453 1.156 .122 34.95 14.35 2.15 1.376 38.12 1.501 .565 40 31.75 3.1 .085 1.575 1.250 .122 15.2 2.15 43.3 34.92 3.75 .598 .085 1.705 1.375 .148 Light weight and special backshells 852 basic series cap type 02 - straight cable clamp 03 - elbow cable clamp 32 - backshell with shield termination and heatshrink sleeving plating W - olive green cadmium N - nickel R - black anodized shell size 64 08-10-12-14-16-18-20-22-24 02 W 10 MIL-C 26482G Series II Elbow cable clamp type 03 Backshell with shield termination and heatshrink sleeving type 32 K ØE F A Shells 8 10 12 14 16 18 20 22 24 A Max ØJ D ØH G C ØB Ø for flange Straight cable clamp type 02 B C Max 22.25 mini 4 Max 5.85 19.1 .876 .157 .230 .752 22.25 6.85 8.7 .876 .27 .343 22.25 10.15 12 .876 .400 .472 27.45 11.7 1.081 .461 27.45 15.5 20.55 1.081 .610 .809 27.45 17.5 22.55 1.081 .689 .888 27.45 20.7 25.75 1.081 .815 1.014 27.45 23.9 28.95 1.081 .941 1.140 27.45 27 32.05 42.7 1.081 1.063 1.262 1.681 D Max L Ø for flange E F Max G Max H Max J Max K Max L Max 20 mini 4 Max 5.85 25 29 7.5 18.2 3.7 15 .787 .157 .230 .984 1.142 .295 .717 .146 .591 20.3 22.2 6.85 8.7 27.9 29 9.7 19.2 3.7 15 .799 .874 .27 .343 1.098 1.142 .382 .756 .146 .591 23.5 24 10.15 12 31.2 29 13 24.2 3.7 15 .925 .945 .400 .472 1.228 1.142 .512 .953 .146 .591 16.75 25.5 24.5 11.7 16.75 32.8 29 15 27.2 3.7 15 .659 1.004 .965 .461 .659 1.291 1.142 .591 1.071 .146 .591 29.5 27 15.5 20.55 36.5 29 18.3 30.2 3.7 15 1.161 1.063 .610 .809 1.437 1.142 .720 1.189 .146 .591 32.3 28.6 17.5 22.55 38.5 29.3 21 33.2 3.7 15 1.272 1.126 .689 .888 1.516 1.154 .827 1.307 .146 .591 36 30.1 20.7 25.75 41.80 29.3 23.5 36.3 3.7 15 1.417 1.185 .815 1.014 1.646 1.154 .925 1.429 .146 .591 39 31.9 23.9 28.95 45 29.3 26.5 39.5 3.7 15 1.535 1.256 .941 1.140 1.772 1.154 1.043 1.555 .146 .591 33.4 27 32.05 48 29.3 30 42.6 3.7 15 1.315 1.063 1.262 1.890 1.154 1.181 1.677 .146 .591 65 MIL-C 26482G Series II Male - Female Saver Ordering information SN 1206- ✱✱- ✱✱- S✱ basic series shell size 08-10-12-14-16-18-20-22-24 contact layout standard # 20 contact layout contact type Pin / Socket (socket on locking ring side) -✱ -✱ -✱ plating W - olive green N - black shielding B - with O - without blocking system B - heatshrink sleeve F - floating ring Q - without Dimensions D Max. G ± 0.1 0 H -0.5 F Shell size Contact layouts Polarization A Max B Max C Max D Max E F G H I Max 8 3A , 33 N, W 19.03 12.03 9.09 33.90 2.68 8.38 9.10 9.06 21.70 .358 1.335 .106 .330 .358 .357 .854 12.34 33.90 2.68 8.38 9.10 9.06 24.50 0 -0.83 10 E 0 -1.41 ØB Max. ØA Max. ØC Max. 12 14 16 18 20 22 24 66 .749 .474 21.83 15.01 6 N, W .486 1.335 .106 .330 .358 .357 .965 10 N, W, X, Y, Z 26.13 19.07 15.19 33.90 2.68 8.38 9.10 9.06 28.80 .598 1.335 .106 .330 .358 .357 1.134 19 N, W, X, Y 29.33 22.25 18.36 33.90 2.68 8.38 9.10 9.06 32.00 .723 1.335 .106 .330 .358 .357 1.260 26 N, W, X, Y, Z 32.53 25.42 21.54 33.90 2.68 8.38 9.10 9.06 35.20 .848 1.335 .106 .330 .358 .357 1.386 32 N, W, X, Y, Z 35.33 28.60 24.08 33.90 2.68 8.38 9.10 9.06 38.00 .948 1.335 .106 .330 .358 .357 1.496 41 N, W, X, Y 38.83 31.77 27.25 35.50 4.28 9.98 10.70 10.64 41.50 1.251 1.073 1.398 .169 .393 .421 .419 1.634 55 N, W, X, Y, Z 42.03 34.95 30.43 35.50 4.28 9.98 10.70 10.64 44.70 1.376 1.198 1.398 .169 .393 .421 .419 1.760 61 N, W, X, Y, Z 45.13 38.12 33.60 35.50 4.28 9.98 10.70 10.64 47.80 1.323 1.398 .169 .393 .421 .419 1.882 .859 1.029 1.155 1.281 1.391 1.529 1.655 1.777 .591 .751 .876 1.001 1.126 1.501 MIL-C 26482G Series II Tooling for basic series 8526 and 8525 extraction of unwired contacts contacts size part numbers 20 8522-56 16 8522-57 12 8522-58 8522-56 8522-57 8522-58 filler plugs contacts size part numbers colour 20 MS 27488-20 red 16 MS 27488-16 blue 12 MS 27488-12 yellow direction of introduction in grommet These filler plugs are installed at the rear of unwired contacts to maintain connector sealing Backshell tightening pliers, part number : 8498-03 Square jaws, part number : 8500-1015 (order 2 jaws) Tightening support, part number : 8500-30 8500-30 8498-03 Strap backshell tightening spanner par number : 8498-04 8498-04 Square strap : 8498-103 crimping (contact size : 20, 16 and 12) wire sizes contacts size mm2 AWG 0.93* 18* 0.60 20 20 0.38 22 0.21 24 1.91* 14* 1.34 16 16 0.93 18 0.60 20 3.18 12 12 1.91 14 part numbers 8365 with 8365-02 crimping tools } } } locators 8365 (M22520/1-01) 8365-02 (M22520/1-02) or or 8476-01 (M22520/2-01) 8476-02 (M22520/2-01) 8365 (M22520/1-01) 8365-02 (M22520/1-02) 8365 (M22520/1-01) 8365-02 (M22520/1-02) insertion and extraction of wired contacts disposable plastic tool - colored tip. for insertion - white tip. for extraction 8522-20 8522-16 8522-12 8476-01 with 8476-02 contacts part numbers colours size 20 M 81969-14-11 red 16 M 81969-14-03 blue 12 M 81969-14-04 yellow 67