BYV26G SINTERED GLASS JUNCTION FAST AVALANCHE RECTIFIER VOLTAGE： ：1400V CURRENT: 1.05A FEATURE SOD-57 Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL BYV26G units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage VRRM VRMS VDC 1400 980 1400 V V V Reverse avalanche breakdown voltage IR = 0.1 mA Maximum Average Forward Rectified Current 3/8”lead length at Ttp =85°C V(BR)R 1500min V IFAV 1.05 A Non-repetitive Peak Forward Current at t=10ms half sine wave IFSM 30 A Maximum Forward Voltage at 1.0A Non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =165°C Maximum Reverse Recovery Time (Note 2) Diode Capacitance (Note 3) Typical Thermal Resistance (Note 4) Storage and Operating Junction Temperature VF 2.15 V ERSM 10 mJ 5.0 150.0 150 35 100 -65 to +175 µA µA IR Trr Cd Rth(ja) Tstg, Tj nS pF K/W °C Note: 1. IR=400mA; Tj=Tjmax prior to surge; inductive load switched off 2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Measured at 1.0 MHz and applied reverse voltage of 0Vdc 4. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV26G Rev.A1 www.gulfsemi.com