COMMUNICATIONS COMPONENTS Amplified Spontaneous Emission Noise Rejection Filter Key Features • Thin film filter based • Wideband signal transmission • High level ASE noise rejection • Low temperature dependent loss • Epoxy-free optical path Applications • Pre-amplifiers • WDM in-line amplifiers The JDSU amplified spontaneous emission (ASE) noise rejection filter uses interference filter technology to achieve wideband signal transmission and high level ASE noise rejection in erbium doped fiber amplifiers. Stable and reliable, these high performance filters are ideal for pre-amplifier and wavelength division multiplexing (WDM) in-line amplifier applications. Compliance • Telcordia GR-1221 NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com AMPLIFIED SPONTANEOUS EMISSION NOISE REJECTION FILTER 2 Performance (Model 1) 5 0 -5 -10 -15 -20 -25 -30 -35 -40 1520 15 1530 1540 1550 1560 1570 WAVELENGTH (nm) Specifications Parameter Model 1 Model 2 Model 3 Pass wavelength range λP Rejection wavelength range λR Insertion loss at λP Flatness at λP Isolation at λR Optical return loss Polarization dependent loss Polarization mode dispersion Temperature dependent loss Optical Power Tensile load Operating temperature Storage temperature Package dimensions (D x L) 250 µm 1535 to 1565 nm 1510 to 1530 nm 0.6 dB 0.3 dB 20 dB 50 dB 0.05 dB 0.1 ps 0.1 dB 500mW 5N -5 to 75 °C -40 to 85 °C 1537 to 1565 nm 1510 to 1532 nm 0.6 dB 0.3 dB 20 dB 50 dB 0.05 dB 0.1 ps 0.1 dB 500mW 5N -5 to 75 °C -40 to 85 °C 1544 to 1565 nm 1510 to 1538 nm 0.6 dB 0.3 dB 20 dB 50 dB 0.05 dB 0.1 ps 0.1 dB 500mW 5N -5 to 75 °C -40 to 85 °C 5.5 x 30 mm (Standard) 3.2 x 30 mm (Miniature) 5.5 x 40 mm (Standard) 3.2 x 40 mm (Miniature) >1.0 m 5.5 x 30 mm (Standard) 3.2 x 30 mm (Miniature) 5.5 x 40 mm (Standard) 3.2 x 40 mm (Miniature) >1.0 m 5.5 x 30 mm (Standard) 3.2 x 30 mm (Miniature) 5.5 x 40 mm (Standard) 3.2 x 40 mm (Miniature) >1.0 m 900 µm Fiber length Maximum Maximum Minimum Minimum Maximum Maximum Maximum Maximum Maximum AMPLIFIED SPONTANEOUS EMISSION NOISE REJECTION FILTER Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: FWS-200011000 FWS-2000 Code 1 2 3 Model 1535 to 1565 nm 1537 to 1565 nm 1544 to 1565 nm Code 1 2 Fiber Type 250 µm fiber 900 µm fiber Code 0 1 Optical Power Standard power, 500 mW High power, 2 W Code 0 1 Package Standard Miniature Code 0 1 2 3 4 5 6 Connector Type1, 2 No connector FC/SPC FC/APC SC/SPC SC/APC ST LC/SPC 1. Connectors available only with 900 µm fiber option. 2. Other connectors available upon request. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 21021899 005 0708 ASEFFWS.DS.CC.AE SMF-28 is a registered trademark of Corning Incorporated. Telcordia is a registered trademark of Telcordia Technologies Incorporated. July 2008