IEC/EN/DIN EN60747-5-2 Option 060 for Plastic Optocoupler Data Sheet Description Ordering Information Optocouplers are frequently used to provide high voltage insulation. Because optocouplers perform this safety function, they are regulated by many country safety agencies, both at the component level and the equipment level. Specify Part Number followed by Option Number. Standard 8 Pin DIP optocouplers with Option 060, are tested according to IEC/EN/DIN EN60747-5-2 at VIORM = 630 Vpeak. This option may also be combined with Option #300 (gullwing surface mount) or #500 (gullwing in tape and reel). Surface Mount SO8 optocouplers with Option 060, are tested at VIORM = 560 Vpeak. Avago Technologies also offers other various IEC/EN/DIN EN60747-5-2 approved products at different levels of VIORM such as VIORM = 1414 Vpeak (HCNWxxxx series) and VIORM = 891 Vpeak (HCPL-Jxxx series). Refer to the front of the optocoupler section of the Isolation and Control Component Designer’s Catalog, under Product Safety Regulations section, for a detailed description of IEC/EN/DIN EN60747-5-2 and the partial discharge tests for production Option 060 is available on the following products: Standard 8 Pin DIP Product (VIORM = 630 Vpeak) HCPL-2211 HCPL-2212 HCPL-2219 HCPL-2300 HCPL-2400 HCPL-2611 HCPL-261A HCPL-261N HCPL-3120 HCPL-3150 HCPL-4503 HCPL-4504 HCPL-4506 HCPL-4701 HCPL-7840 Example: HCPL-3120#060 To obtain these combinations, order Option #360 or #560 respectively. Examples: HCPL-3120 #360 (gullwing surface mount and IEC/EN/DIN EN60747-5-2 approved) HCPL-3120 #560 (gullwing surface mount and IEC/EN/DIN EN60747-5-2 approved in tape and reel) Marking Information 8 PIN DIP PACKAGE A XXXXV YYWW RU OPTION 060 LAST 4 DIGITS OF PART NUMBER UL RECOGNITION* DATE CODE * NO UL MARKING ON HCPL-261A/261N/ 3120/3150/4701/7840. SO8 PACKAGE OPTION 060 XXXV YWW LAST 3 DIGITS OF PART NUMBER DATE CODE Surface Mount SO8 Product (VIORM = 560 Vpeak) HCPL-0211 HCPL-0454 HCPL-0466 HCPL-0611 HCPL-061A HCPL-061N HCPL-070A Contact your local Avago Technologies Sales Representative concerning availability of this option for optocouplers not listed. Value Parameter Symbol DIP SO8 Units Conditions Minimum External Air Gap (External Clearance) L(101) 7.1 4.9 mm Measured from input terminals to output terminals, shortest distance through air. - L(102) 7.4 4.8 mm 0.08 0.08 mm 175 175 V IIIa IIIa Minimum External Track ing (External Creepage) Minimum Internal Plastic Gap Tracking Resistance (Comparative Tracking Index) CTI Isolation Group Measured from input terminals to output terminals, shortest distance path along body. Through insulation distance, conductor to conductor, usually the direct distance between (Internal Clearance) the photoemitter and photodetector inside the optocoupler cavity. DIN IEC 112/VDE 0303 Part 1 Material Group (DIN VDE 0110, 1/89, Table 1) All Avago Technologies’ data sheets report the creepage and clearance inherent to the optocoupler component itself. These dimensions are needed as a starting point for the equipment designer when determining the circuit insulation requirements. However, once mounted on a printed circuit board, minimum creepage and clearance requirements must be met as specified for individual equipment standards. For creepage, the shortest distance path along the surface of a printed circuit board between the solder fillets of the input and output leads must be considered. There are recommended techniques such as grooves and ribs which may be used on a printed circuit board to achieve desired creepage and clearances. Creepage and clearance distances will also change depending on factors such as pollution degree and insulation level. SURFACE MOUNT SO8 PRODUCT STANDARD 8 PIN DIP PRODUCT 800 OUTPUT POWER – PS INPUT CURRENT - IS OUTPUT POWER – PS INPUT CURRENT - IS 800 P S (mW) 700 IS (mA) 600 500 400 300 (230) 200 100 P S (mW) 700 IS (mA) 600 500 400 300 200 (150) 100 0 0 0 25 50 75 100 125 150 175 o TA - CASE TEMPERATURE - C 200 0 25 50 75 100 125 150 175 200 o TA - CASE TEMPERATURE - C Figure 1. Thermal Derating Curve, Dependence of Safety Limiting Value with Case Temperature per VDE 0884. 2 IEC/EN/DIN EN60747-5-2 Insulation Related Characteristics (Option 060) Standard 8 Pin DIP Package *85°C: HCPL-2211, HCPL-2212, HCPL-2219, HCPL-2300, HCPL-2400, HCPL-2611, HCPL-261A, HCPL-261N, HCPL-4701, HCPL-7840. **100°C: HCPL-3120, HCPL-3150, HCPL-4503, HCPL-4504, HCPL-4506. SO8 Package *85°C: HCPL-0211, HCPL-0611, HCPL-061A, HCPL-061N, HCPL-070A. **100°C: HCPL-0454, HCPL-0466. Description Symbol Std. 8 Pin DIP SO8 I-IV I-IV I-III I-IV I-III Climatic Classification 55/85/21* 55/100/21** 55/85/21* 55/100/21** Pollution Degree (DIN VDE 0110/1.89) 2 2 Installation classification per DIN VDE 0110/1.89, Table 1 for rated mains voltage £ 150 V rms for rated mains voltage £ 300 V rms for rated mains voltage £ 450 V rms Units Maximum Working Insulation Voltage VIORM 630 560 V peak Input to Output Test Voltage, Method b† VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5 pC VPR 1181 1050 V peak Input to Output Test Voltage, Method a† VIORM x 1.5 = VPR, Type and Sample Test, tm = 60 sec, Partial Discharge < 5 pC VPR 945 840 V peak Highest Allowable Over voltage † (Transient Overvoltage, tini = 10 sec) VIOTM 6000 4000 V peak Safety Limiting Values (Maximum values allowed in the event of a failure, also see Thermal Derating curve, Figure 1.) Case Temperature Input Current Output Power TS IS,INPUT PS,OUTPUT 175 230 600 150 150 600 oC Insulation Resistance at TS, V10 = 500 V RIO 109 109 W †Refer to the front of the optocoupler section of the Isolation and Control Component Designer’s Catalog, under Product Safety Regulations section (IEC/EN/DIN EN60747-5-2), for a detailed description. Note: These optocouplers are suitable for “safe electrical isolation” only within the safety limit data. Maintenance of the safety data shall be ensured by means of protective circuits. Note: The surface mount classification is Class A in accordance with CECC 00802. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-1058EN AV02-3614EN - June 12, 2012 mA mW