ILLUMINATION LUXEON 3014 Hot-color targeted industry standard package for uniform light LUXEON 3014 is an industry standard compatible footprint for ease of installation into existing 3014 sockets and stays consistent with a 3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted at operating conditions—65°C. This low power device is an ideal choice when uniformity and reduction in spottiness is necessary for indoor designs. FEATURES AND BENEFITS PRIMARY APPLICATIONS Industry standard footprint and package offering compatibility with existing designs Indoor Area Lighting 1/9th ANSI micro-color binning enables tight color control Lamps Hot-color targeted at 65°C which leads to better color accuracy Specialty Lighting Rectangular package design allows for increased uniformity –– Monochrome LED Drive at maximum current, 120mA for superior value –– Channel Lighting –– Signage RoHS DS208-L LUXEON 3014 (Legacy) Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved. No. E352519 COMPLIANT Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Packaging and Labeling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Pocket Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Moisture Barrier Bag (MBB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Shipment Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON 3014 LEDs are tested with a 20ms monopulse of 60mA at a junction temperature,Tj, of 25°C. Forward voltage and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 65°C. Part Number Nomenclature Part numbers for LUXEON 3014 follow the convention below: L 1 3 0 – A A B B 0 0 1 4 0 0 0 0 1 Where: A A – designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K, 80=8000K, 10=10000K) B B designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI) Therefore, the following part number is used for a LUXEON 3014 3000K 80CRI: L 1 3 0 – 3 0 8 0 0 0 1 4 0 0 0 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON 3014 at 60mA and 30mA at test temperature. TYPICAL LUMINOUS EFFICACY (lm/W) TYPICAL LUMINOUS FLUX (lm) 26 140 14 151 L130-8070001400001 21 24 129 14 151 L130-1070001400001 80 19 21 113 11 118 L130-2280001400001 80 21 23 124 12 129 L130-2580001400001 2700K 80 20 24 129 13 139 L130-2780001400001 3000K 80 22 26 140 12 129 L130-3080001400001 3500K 80 22 26 140 13 140 L130-3580001400001 4000K 80 23 27 145 14 151 L130-4080001400001 5000K 80 23 27 145 14 151 L130-5080001400001 5700K 80 23 27 145 14 151 L130-5780001400001 6500K 80 23 27 145 14 151 L130-6580001400001 2700K 90 17 19 102 10 108 L130-2790001400001 3000K 90 17 19 102 10 108 L130-3090001400001 3500K 90 19 21 113 11 118 L130-3590001400001 4000K 90 19 21 113 11 118 L130-4090001400001 5000K 90 19 22 118 12 129 L130-5090001400001 5700K 90 19 22 118 12 129 L130-5790001400001 6500K 90 19 21 113 11 118 L130-6590001400001 LUMINOUS FLUX [3] (lm) NOMINAL CCT [1] MINIMUM CRI [2, 3, 4] MINIMUM 8000K 70 23 10000K 70 2200K 2500K TYPICAL 60mA TYPICAL LUMINOUS EFFICACY (lm/W) PART NUMBER 30mA Notes for Table 1: 1. Correlated color temperature is hot targeted at Tj=65°C. 2. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. 3. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 4. For 90CRI products, R9≥50. Optical Characteristics Table 2. Optical characteristics for LUXEON 3014 at 60mA, Tj=25°C. PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] L130-xxxx001400001 140° 116° Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 3 Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON 3014 at 60mA, Tj=25ºC. PART NUMBER FORWARD VOLTAGE [1] (V) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE (mV/°C) [2] 2.8 3.1 3.3 -2.0 to -4.0 L130-xxxx001400001 TYPICAL THERMAL RESISTANCE—JUNCTION TO SOLDER PAD (°C/W) 35 Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. 2. Measured between 25°C and 85°C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON 3014. PARAMETER DC Forward Current MAXIMUM PERFORMANCE 120mA [1,2] Peak Pulsed Forward Current [1,3] LED Junction Temperature [1] (DC & Pulse) 150mA 115°C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2 Operating Case Temperature [1] -40°C to 105°C LED Storage Temperature -40°C to 100°C Soldering Temperature JEDEC 020D 260°C Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) -5V Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met: – The frequency of the ripple current is 100Hz or higher – The average current for each cycle does not exceed the maximum allowable DC forward current – The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. At 10% duty cycle with pulse width of 10ms. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 4 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for L130-xx70001400001 at 60mA, Tj=25ºC. Figure 1b. Typical normalized power vs. wavelength for L130-xx80001400001 at 60mA, Tj=25ºC. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 5 Figure 1c. Typical normalized power vs. wavelength for L130-xx90001400001 at 60mA, Tj=25ºC. Light Output Characteristics Figure 2a. Typical normalized light output vs. junction temperature for L130-xxxx001400001 at 60mA. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 6 Figure 2b. Typical normalized light output vs. forward current for L130-xxxx001400001 at Tj=25ºC. Forward Current Characteristics Figure 3. Typical forward current vs. forward voltage for L130-xxxx001400001 at Tj=25ºC. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 7 Radiation Pattern Characteristics Figure 4. Typical radiation pattern for L130-xxxx001400001 at 60mA, Tj=25ºC. Figure 5. Typical polar radiation pattern for L130-xxxx001400001 at 60mA, Tj=25ºC. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 8 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON 3014 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D A – designates luminous flux bin (example: B=10.0 to 11.5 lumens, F=17.0 to 19.0 lumens) B C – designates color bin (example: 7D, 7E, 7F, 7G, 7H, 7J, 7K, 7L, 7M for 3000K parts) D designates forward voltage bin (example: T=2.80V to 2.90V, W=3.00V to 3.10V) – Therefore, a LUXEON 3014 with a lumen range of 10.0 to 11.5, color bin of 7D and a forward voltage range of 2.80V to 2.90V has the following CAT code: B 7 D T Luminous Flux Bins Table 5 lists the standard luminous flux bins for LUXEON 3014 emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3014 at 60mA, Tj=25°C. BIN LUMINOUS FLUX [1] (lm) MINIMUM MAXIMUM A 8.5 10.0 B 10.0 11.5 C 11.5 13.0 D 13.0 15.0 E 15.0 17.0 F 17.0 19.0 G 19.0 21.0 H 21.0 24.0 J 24.0 28.0 K 28.0 32.0 Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 9 Color Bin Definitions Figure 6. 3-, 4- and 5-step MacAdam ellipse illustration for Table 6. Figure 7a. Color bin structure for LUXEON 3014 2200K, hot-color targeted at Tj=65°C. Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for L130-22xx001400001 at 60mA, hot-color targeted at Tj=65°C. CENTER POINT (cx, cy) NOMINAL CCT COLOR SPACE 2200K Single 3-step MacAdam ellipse (0.5037, 0.4142) 2200K Single 5-step MacAdam ellipse (0.5037, 0.4142) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 0.0072 0.0042 51.0° 0.0120 0.0070 51.0° Notes for Table 6b: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 10 Figure 7b. Color bin structure for LUXEON 3014 2500K, hot-color targeted at Tj=65°C. Table 6b. 3- and 5-step MacAdam ellipse color bin definitions for L130-25xx001400001 at 60mA, hot-color targeted at Tj=65°C. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 2500K Single 3-step MacAdam ellipse (0.4753, 0.4127) 0.0075 0.0042 53.0° 2500K Single 5-step MacAdam ellipse (0.4753, 0.4127) 0.0125 0.0070 53.0° NOMINAL CCT Notes for Table 6b: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. 0.450 0.440 0.430 8J 0.420 8K 8F 8E y 0.410 8D 8G 8H 0.400 8M 8L 2580 0.390 2870K 0.380 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x Figure 7c. Color bin structure for LUXEON 3014 2700K, hot-color targeted at Tj=65°C. Table 6c. 3- and 5-step MacAdam ellipse color bin definitions for L130-27xx001400001 at 60mA, hot-color targeted at Tj=65°C. CENTER POINT (cx, cy) NOMINAL CCT COLOR SPACE 2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 0.00810 0.00420 53.70° 0.01350 0.00700 53.70° Notes for Table 6c: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 11 0.445 0.435 0.425 7K 0.415 7J y 7E 7F 0.405 7D 0.395 7M 7H 2870K 0.385 0.375 7G 7L 3200K 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x Figure 7d. Color bin structure for LUXEON 3014 3000K, hot-color targeted at Tj=65°C. Table 6d. 3- and 5-step MacAdam ellipse color bin definitions for L130-30xx001400001 at 60mA, hot-color targeted at Tj=65°C. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.22° 3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.22° NOMINAL CCT Notes for Table 6d: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. 0.430 0.420 0.410 6K 0.400 6F 6J y 6E 6D 0.390 6G 6L 6H 0.380 3250K 6M 0.370 3750K 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x Figure 7e. Color bin structure for LUXEON 3014 3500K, hot-color targeted at Tj=65°C. Table 6e. 3- and 5-step MacAdam ellipse color bin definitions for L130-35xx001400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00° 3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00° Notes for Table 6e: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 12 0.420 0.410 0.400 0.390 y 5K 5F 5E 5J 0.380 5D 5L 5G 0.370 5H 3750K 5M 0.360 4250K 0.350 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x Figure 7f. Color bin structure for LUXEON 3014 4000K, hot-color targeted at Tj=65°C. Table 6f. 3- and 5-step MacAdam ellipse color bin definitions for L130-40xx001400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72° 4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72° Notes for Table 6f: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. 0.390 0.380 3K 0.370 3F 3J 0.360 3E y 3G 3D 0.350 3L 3H 4750K 3M 0.340 5250K 0.330 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x Figure 7g. Color bin structure for LUXEON 3014 5000K, hot-color targeted at Tj=65°C. Table 6g. 3- and 5-step MacAdam ellipse color bin definitions for L130-50xx001400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62° 5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.62° Notes for Table 6g: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 13 0.370 0.360 2K 0.350 2F 2J 2E 0.340 y 2G 2D 2L 5250K 2H 0.330 2M 6000K 0.320 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x Figure 7h. Color bin structure for LUXEON 3014 5700K, hot-color targeted at Tj=65°C. Table 6h. 3- and 5-step MacAdam ellipse color bin definitions for L130-57xx001400001 at 60mA, hot-color targeted at Tj=65°C. CENTER POINT (cx, cy) NOMINAL CCT COLOR SPACE 5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 0.00746 0.00320 59.09° 0.01243 0.00533 59.09° Notes for Table 6h: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. 0.365 0.355 0.345 1K 1F 0.335 1J y 1E 0.325 1D 1G 1L 6000K 1H 1M 0.315 7000K 0.305 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x Figure 7i. Color bin structure for LUXEON 3014 6500K, hot-color targeted at Tj=65°C. Table 6i. 3- and 5-step MacAdam ellipse color bin definitions for L130-65xx001400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57° 6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57° Notes for Table 6i: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 14 Figure 7j. Color bin structure for LUXEON 3014 8000K, hot-color targeted at Tj=65°C. Table 6j. 4-step MacAdam ellipse color bin definitions for L130-80xx01400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 8000K Single 4-step MacAdam ellipse (0.2966, 0.3126) 0.00844 0.00334 58.64° Notes for Table 6j: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. Figure 7k. Color bin structure for LUXEON 3014 10000K, hot-color targeted at Tj=65°C. Table 6k. 4-step MacAdam ellipse color bin definitions for L130-10xx01400001 at 60mA, hot-color targeted at Tj=65°C. NOMINAL CCT COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 10000K Single 4-step MacAdam ellipse (0.2720, 0.2860) 0.00877 0.00332 63.28° Notes for Table 6k: 1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 15 Forward Voltage Bins Table 7. Forward voltage bin definitions for LUXEON 3014 at 60mA, Tj=25°C. FORWARD VOLTAGE [1] (V) BIN MINIMUM MAXIMUM T 2.80 2.90 V 2.90 3.00 W 3.00 3.10 X 3.10 3.20 Y 3.20 3.30 Z 3.30 3.40 Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements. Mechanical Dimensions MAX 3,2 1,15 MAX 3,1 1,4 0,75 0,30 ± 0,08 2,50 0,70 0,75 2,9 0,7 1,6 Figure 8. Mechanical dimensions for LUXEON 3014. Notes for Figure 8: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 16 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25ºC to Peak JEDEC J-STD-020D Time Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for LUXEON 3014. PROFILE FEATURE LEAD-FREE ASSEMBLY Preheat Minimum Temperature (Tsmin) 150°C Preheat Maximum Temperature (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3°C / second maximum Liquidus Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260°C Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6°C / second maximum Time 25°C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for LUXEON 3014. LEVEL 3 FLOOR LIFE SOAK REQUIREMENTS STANDARD TIME CONDITIONS TIME CONDITIONS 168 Hours ≤30°C / 60% RH 192 Hours +5 / -0 30°C / 60% RH DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 17 Solder Pad Design 0.11 Solder mask 1.51 Stencil 0.62 1.61 0.36 0.72 0.70 0.80 0.60 Top copper Package geometric center 0.69 0.79 Figure 10. Recommended PCB solder pad layout for LUXEON 3014. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Packaging and Labeling Information There are two labeling formats used on the reel, moisture barrier bag (MBB) and shipment box. Either Format A or Format B is used throughout all the packaging steps. Lumileds uses CODE 128 barcode font on all the labels. Pocket Tape Figure 11. Pocket tape dimensions for LUXEON 3014. Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 18 Reel Figure 12. Reel dimensions for LUXEON 3014. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 13a: Example of reel label format A. Figure 13b. Example of reel label format B. Notes for Figure 13a and Figure 13b — Reel Label descriptions for customer use: QR code and all other field labels not described are for Lumileds internal use only. 1. Number of LED emitters in a reel. 2. Lumileds part number. 3. Product category code. 4. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose. 5. Country code of origin of manufacturing of parts. E.g. MY for Malaysia, CN for China according to ISO 3166-1 alpha-2 document. 6. Lumileds product name. Lumileds part number is provided in MBB label Format B #2 as shown in Figure 25c. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 19 Moisture Barrier Bag (MBB) Figure 14. Illustration of typical Moisture Barrier Bag (MBB) packaging of a LUXEON emitter reel. MBB consists of humidity indicator card, desiccant bag, MBB label(s) and LED emitter reel. The MBB package is air-tight sealed per JEDEC J-STD-033C. Notes for Figure 14: 1. Drawings are not to scale. There are two MBB labels attached (#1 and #2). The peeled off label (Figure 28) must be detached and affixed to the reel upon opening of the MBB package. Figure 15a. Example of MBB label format A. Notes for Figure 15a — MBB label descriptions for customer use: QR code and all other field labels not described are for Lumileds internal use only. 1. Number of LED emitters in a reel. 2. Lumileds part number. 3. Customer part number for custom requests only. 4. LED test date in YYWW format. 5. Kitting information for custom request only. 6. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose. 7. Product category code. 8. Date in which MBB was sealed in YYYYMMDD format. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 20 Figure 15b. Example of MBB label format B #1. Figure 15c. Example of MBB label format B #2. Notes for Figure 15b and Figure 15c — MBB label descriptions for customer use: QR code and all other field labels not described are for Lumileds internal use only. 1. Number of LED emitters in a reel. 2. Lumileds product name. 3. LED test date in YYWW format. 4. Unique production lot identification number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose. 5. Product category code. 6. Date in which MBB was sealed in YYYYMMDD format. 7. Lumileds part number. 8. Customer part number for custom requests only. 9. Kitting information for custom request only. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 21 Shipment Box Figure 16. Illustration of MBBs packing into a shipment box. Notes for Figure 16: 1. Drawings are not to scale. Figure 17a. Example of shipment box label format A. Notes for Figure 17a — Shipment box label descriptions for customer use: All other field labels not described are for Lumileds internal use only. 1. Lumileds part number. 2. Customer part number for custom requests only. 3. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 22 Figure 17b. Example of shipment box label format B. Notes for Figure 17b — Shipment box label descriptions for customer use: All other field labels not described are for Lumileds internal use only. 1. Lumileds part number. 2. Customer part number for custom requests only. 3. Total number of LED emitters in a shipment box. 4. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed. 5. Lumileds product name. DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 ©2017 Lumileds Holding B.V. All rights reserved. 23 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry “firsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com. ©2017 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS208-L LUXEON 3014 (Legacy) Product Datasheet 20170216 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.