AE362 E-pHEMT MMIC Product Features Applications • 30 ~ 4000MHz • GaAs E-pHEMT MMIC • Higher linearity • Low Noise Figure • High Max input power • SOT-89 SMD Type package • Higher productivity • Lower manufacturing cost • Pb Free / RoHS Standard • Cellular, GSM • PCS, DCS, W-CDMA • Wibro, WiMax, WiFi • Tetra, CATV, Satellite system • RFID, Femtocell • Multi-metering Package Type : SOT-89 Description AE362 is a drive or pre-drive amplifier designed in a low cost SOT-89 package. This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current and high IP3. It is designed as driver devices for infrastructure equipment in the 30~4000MHz Wireless technologies such as Cellular, GSM, PCS, W-CDMA, Wibro, WiMax System. The data in this spec sheet is valid only for 50 ohm application. Electrical Specifications Test Frequency PARAMETER UNIT REMARK 850MHz 2050MHz 2500MHz Small Signal Gain dB 20.5 15.2 14 - Input Return Loss dB -10 -13 -12 - Output Return Loss dB -15 -11 -10 - Output IP3* dBm 31 32 32 - 1dB Compression Point dBm 19 20 20 - Noise Figure dB 1.2 1.2 1.3 - WCDMA** dBm 8.5 8.5 8.5 @-50dBc ACLR Supply Voltage/DC Current V/mA 4.5/45 - Note 1. OIP3 measured with 2 tones at an output power of +0dBm/tone separated by 1MHz 2. WCDMA 3G 4FA Test Model1 64DPCH Absolute Maximum Ratings 4BPARAMETER UNIT MIN TYP MAX REMARK Device Voltage V - 4.5 8 - Operating Case Temperature ℃ -40 - 85 - Storage Temperature ℃ -40 - 150 - ESD Human Body Model - - Class 1A - - Moisture Sensitivity Level - - MSL1 - - Junction Temperature (Tj) ℃ - - 180 Thermal Resistance (Rth) ℃/W - 123.5 - @ quiescent current, No RF, Tc = 85℃ Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 1/9 Version 1.3 AE362 E-pHEMT MMIC Application Circuit @ 800 ~ 900MHz, 50ohm System Rbias C8 C9 L3 L2 C1 L1 C2 L4 C3 C6 C4 C5 C7 EVB BOM Description Reference Designator Manufacturer Manufacturer's P/N CAP, 3pF, 1608 C2 Murata GRM1885C1H3R0CZ01D CAP, 39pF, 1608 C1 Murata GRM2165C1H390JZ01D CAP, 100pF, 1608 L4 Murata GRM1885C1H101JA01D CAP, 100nF, 1608 C8 Murata GRM188R71C104KA01D CAP, 4.7uF, 3216-18 C9 AVX TAJA475M016RNJ IND, 6.8nH, 1608 L2 Taiyo Yuden HK16086N8J-T IND, 22nH, 1608 L3 Taiyo Yuden HK160822NJ-T IND, 56nH, 1608 L1 Taiyo Yuden HK160856NJ-T RES, 0Ohm, 1608 C6, Rbias ROHM MCR03 EZPJ000 DNP C3, C4, C5, C7 - - Typical Performance PARAMETER UNIT TYPICAL REMARK Operational Frequency Range MHz 800 ~ 900 - Small Signal Gain(S21) dB 20.5 @ 850MHz Input Return Loss(S11) dB -10 - Output Return Loss(S22) dB -15 - Output IP3(OIP3) dBm 31 1dB Compression Point(P1dB) dBm 19 Noise Figure(NF) dB 1.2 - WCDMA** dBm 8.5 - Supply Voltage/DC Current V/mA 4.5/45 - @ 850MHz Note 1. OIP3 measured with 2 tones at an output power of +0dBm/tone separated by 1MHz 2. WCDMA 3G 4FA Test Model1 64DPCH Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 2/9 Version 1.3 AE362 E-pHEMT MMIC Typical Performance @ VDD=4.5V, IDS=45mA, T=25℃, 50ohm System S-parameter Noise Figure vs Frequency 25 20 3.0 20 10 2.5 15 0 10 -10 Gain(dB) 2.0 1.5 1.0 5 0 0.70 0.75 0.80 0.85 0.90 0.95 -20 0.5 -30 1.00 0.0 800 820 Freq(GHz) 860 880 900 880 900 Freq(MHz) OIP3 vs Frequency P1dB vs Frequency 24.0 840 36.0 22.0 34.0 20.0 32.0 18.0 30.0 16.0 28.0 14.0 26.0 800 820 840 860 880 800 900 Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 820 840 860 Freq(MHz) Freq(MHz) All specifications may change without notice 3/9 Version 1.3 AE362 E-pHEMT MMIC Application Circuit @ 1900 ~ 2200MHz, 50ohm System Rbias C9 C8 L3 C1 L1 L2 C2 C6 L4 C3 C4 C5 C7 EVB BOM Description Reference Designator Manufacturer Manufacturer's P/N CAP, 0.75pF, 1608 C2 Murata GRM1885C1HR75CZ01D CAP, 6pF, 1608 C2, C5 Murata GRM1885C1H6R0DZ01D CAP, 7pF, 1608 L2 Murata GRM1885C1H7R0CZ01D CAP, 20pF, 1608 L4 Murata GRM1885C1H200JA01D CAP, 100nF, 1608 C8 Murata GRM188R71C104KA01D CAP, 4.7uF, 3216-18 C9 AVX TAJA475M016RNJ IND, 10nH, 1608 L3 Taiyo Yuden HK160810NJ-T RES, 0Ohm, 1608 C1, R1, C6 ROHM MCR03 EZPJ000 DNP L1, C4, C7 - - Typical Performance PARAMETER UNIT TYPICAL REMARK Operational Frequency Range MHz 1900 ~ 2200 - Small Signal Gain(S21) dB 15.2 @ 2050MHz Input Return Loss(S11) dB -13 - Output Return Loss(S22) dB -11 - Output IP3(OIP3) dBm 32 1dB Compression Point(P1dB) dBm 20 Noise Figure(NF) dB 1.2 - WCDMA** dBm 8.5 - Supply Voltage/DC Current V/mA 4.5/45 - @ 2050MHz Note 1. OIP3 measured with 2 tones at an output power of +0dBm/tone separated by 1MHz 2. WCDMA 3G 1FA Test Model1 64DPCH Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 4/9 Version 1.3 AE362 E-pHEMT MMIC Typical Performance @ VDD=4.5V, IDS=45mA, 50ohm System Gain vs Frequency Isolation vs Frequency 20.0 -21.0 85°C 25°C 18.0 - 40°C 16.0 -23.0 14.0 -24.0 12.0 -25.0 10.0 1900 1960 2020 2080 2140 2200 85°C 25°C - 40°C -22.0 -26.0 1900 1960 Freq(MHz) 2020 2080 2140 Input R/L vs Frequency Output R/L vs Frequency 10.0 5.0 85°C 25°C - 40°C 0.0 -5.0 -20.0 -10.0 -30.0 -15.0 1960 2020 2080 2140 2200 85°C 25°C - 40°C 0.0 -10.0 -40.0 1900 -20.0 1900 1960 Freq(MHz) 2020 2080 2140 2200 Freq(MHz) OIP3 vs Frequency Noise Figure vs Frequency 2.5 36.0 85°C 25°C 2.0 - 40°C 32.0 1.0 30.0 0.5 28.0 1960 2020 2080 2140 2200 26.0 1900 Freq(MHz) 1960 2020 2080 2140 2200 Freq(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 85°C 25°C - 40°C 34.0 1.5 0.0 1900 2200 Freq(MHz) All specifications may change without notice 5/9 Version 1.3 AE362 E-pHEMT MMIC Application Circuit @ 2400 ~ 2600MHz, 50ohm System Rbias C9 C8 L3 L2 C1 L1 C3 C2 C6 L4 C4 C5 C7 EVB BOM Description Reference Designator Manufacturer Manufacturer's P/N CAP, 0.75 pF, 1608 C3 Murata GRM1885C1HR75CZ01D CAP, 2pF, 1608 L2 Murata GRM1885C1H2R0CZ01D CAP, 5pF, 1608 L4 Murata GRM1885C1H5R0CZ01D CAP, 100nF, 1608 C8 Murata GRM188R71C104KA01D CAP, 4.7uF, 3216-18 C9 AVX TAJA475M016RNJ IND, 10nH, 1608 L3 Taiyo Yuden HK160810NJ-T RES, 0Ohm, 1608 C1, Rbias, C6 ROHM MCR03 EZPJ000 DNP L1, C2, C4, C5, C7 - - Typical Performance PARAMETER UNIT TYPICAL Reamrk Operational Frequency Range MHz 2400 ~ 2600 - Small Signal Gain(S21) dB 14 @ 2500MHz Input Return Loss(S11) dB -12 - Output Return Loss(S22) dB -10 - Output IP3(OIP3) dBm 32 1dB Compression Point(P1dB) dBm 20 Noise Figure(NF) dB 1.3 - WCDMA** dBm 8.5 - Supply Voltage/DC Current V/mA 4.5/45 - @ 2500MHz Note 1. OIP3 measured with 2 tones at an output power of +0dBm/tone separated by 1MHz 2. WCDMA 3G 4FA Test Model1 64DPCH Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 6/9 Version 1.3 AE362 E-pHEMT MMIC Typical Performance @ VDD=4.5V, IDS=45mA, 50ohm System 20 20 10 15 0 S21 10 -10 S22 5 2.5 -20 S11 0 2.3 2.4 2.5 -30 2.7 2.6 Noise Figure vs Frequency 3.0 Return Loss(dB) Gain(dB) S-parameter 25 2.0 1.5 1.0 0.5 0.0 2400 2440 2520 2560 2600 2560 2600 OIP3 vs Frequency P1dB vs Frequency 24.0 36.0 22.0 34.0 20.0 32.0 18.0 30.0 16.0 28.0 14.0 2400 2480 Freq(MHz) Freq(GHz) 26.0 2440 2480 2520 2560 2600 2400 Freq(MHz) 2480 2520 Freq(MHz) Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] 2440 All specifications may change without notice 7/9 Version 1.3 AE362 E-pHEMT MMIC Package Dimensions (Type: SOT-89) * Unit: mm[inch] | Tolerance ±0.2[.008] ▲ Top View ▲ Side View ▲ Bottom View Pin Description Pin No Function Pin No Function 1 Input 4 GND 2 GND - 3 Output / Bias - Recommended Pattern Recommended Mounting Configuration * Mounting Configuration Notes 1. Ground / thermal via holes are critical for the proper performance of this device. 2. Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance. 3. Mounting screws can be added near the part to fasten the board to a heatsink. Ensure that the ground / thermal via hole region contacts the heatsink. 4. Do not put solder mask on the backside of the PCB in the region where the board contacts the heatsink. 5. RF trace width depends upon the PCB material and construction. 6. Use 1 oz. Copper minimum. Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 8/9 Version 1.3 AE362 E-pHEMT MMIC Revision History Part Number Release Date Version Modification Data Sheet Status AE362 2014.4.11 1.3 Revision : Absolute Maximum Ratings - AE362 2012.10.17 1.2 New datasheet format - AE362 2012.5.12 1.1 FIXED : Operating Frequency Range - AE362 2010.2.22 1.0 Initial Release. - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078 Korean Facilities : 82-31-250-5078 / [email protected] US Facility : 919-677-8780 / [email protected] All specifications may change without notice 9/9 Version 1.3