Click on Series name for product info on aimtec.com Series AM3TIW-RZ 3 Watt | DC-DC Converter FEATURES: No Minimum Load 24 Pin DIP Package Wide 4:1 Input Range High Efficiency up to 81% Over Load Protection Operating Temperature -40 to +85oC Input / Output Isolation 1500 or 3000 VDC Internal EMC Filter Meets EN55022 Class A Continuous Short Circuit Protection Input Under Voltage Protection Models Single output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) Max Capacitive Load (uF) AM3TIW-2403S-RZ AM3TIW-2405S-RZ AM3TIW-2412S-RZ AM3TIW-2415S-RZ AM3TIW-2424S-RZ AM3TIW-4803S-RZ AM3TIW-4805S-RZ AM3TIW-4812S-RZ AM3TIW-4815S-RZ AM3TIW-4824S-RZ 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 3.3 5 12 15 24 3.3 5 12 15 24 900 600 250 200 125 900 600 250 200 125 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 470 470 100 100 47 470 470 100 100 47 167 160 156 154 154 84 80 78 77 77 10 10 10 10 10 7 7 7 7 7 73 77 81 81 81 75 79 81 81 81 AM3TIW-2403SH30-RZ AM3TIW-2405SH30-RZ AM3TIW-2412SH30-RZ AM3TIW-2415SH30-RZ AM3TIW-2424SH30-RZ AM3TIW-4803SH30-RZ AM3TIW-4805SH30-RZ AM3TIW-4812SH30-RZ AM3TIW-4815SH30-RZ AM3TIW-4824SH30-RZ 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 3.3 5 12 15 24 3.3 5 12 15 24 900 600 250 200 125 900 600 250 200 125 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 470 470 100 100 47 470 470 100 100 47 167 160 156 154 154 84 80 78 77 77 10 10 10 10 10 7 7 7 7 7 73 77 81 81 81 75 79 81 81 81 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) AM3TIW-2403D-RZ AM3TIW-2405D-RZ AM3TIW-2412D-RZ AM3TIW-2415D-RZ AM3TIW-2424D-RZ AM3TIW-4803D-RZ AM3TIW-4805D-RZ AM3TIW-4812D-RZ AM3TIW-4815D-RZ AM3TIW-4824D-RZ 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 ±3.3 ±5 ±12 ±15 ±24 ±3.3 ±5 ±12 ±15 ±24 ±450 ±300 ±125 ±100 ±63 ±450 ±300 ±125 ±100 ±63 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 ±220 ±220 ±100 ±100 ±47 ±220 ±220 ±100 ±100 ±47 167 160 156 156 159 84 78 78 78 81 10 10 10 15 20 7 7 7 7 10 75 79 81 81 81 77 81 81 81 79 AM3TIW-2403DH30-RZ AM3TIW-2405DH30-RZ AM3TIW-2412DH30-RZ AM3TIW-2415DH30-RZ AM3TIW-2424DH30-RZ AM3TIW-4803DH30-RZ AM3TIW-4805DH30-RZ 9-36 9-36 9-36 9-36 9-36 18-75 18-75 ±3.3 ±5 ±12 ±15 ±24 ±3.3 ±5 ±450 ±300 ±125 ±100 ±63 ±450 ±300 3000 3000 3000 3000 3000 3000 3000 ±220 ±220 ±100 ±100 ±47 ±220 ±220 167 160 156 156 159 84 78 10 10 10 15 20 7 7 75 79 81 81 81 77 81 Model Input Current Full | No Load (mA) Efficiency (%) Models Dual output Model www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 1 of 5 Input Current Full | No Load (mA) Efficiency (%) Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3TIW-RZ 3 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) AM3TIW-4812DH30-RZ AM3TIW-4815DH30-RZ AM3TIW-4824DH30-RZ 18-75 18-75 18-75 ±12 ±15 ±24 ±125 ±100 ±63 3000 3000 3000 ±100 ±100 ±47 Input Current Full | No Load (mA) 78 78 81 Efficiency (%) 7 7 10 81 81 79 Input Specifications Parameters Nominal Typical 24 48 9-36 18-75 Voltage range Input Reflected Ripple Current Under Voltage Lockout Units VDC (Pi) Network Filter Startup time Absolute Maximum Rating Maximum 20 24 Vin 48 Vin Refer to application circuit 24 Vin 48 Vin ms 50 100 VDC 20 mA p-p (Model On / Off) 8.5 / 7.0 (Model On / Off) 16.5 / 14.5 VDC Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1500 or 3000 VDC MOhm pF Maximum Units > 1000 1000 Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Short circuit restart Over load protection Line voltage regulation Load voltage regulation Transient Recovery Time Conditions ±2 ±2 % % Continuous Auto Recovery 160% Iout 0 – 100% load Transient Deviation Cross Regulation (Dual) Typical 25% min load one output & 100% load on other Temperature coefficient Ripple & Noise * ±0.5 ±1.2 300 ±3 (Single output 3.3V) ±5 % % µsec ±5 % ±0.02 80 (24V dual Models) 100 %/oC % mV p-p *- 20MHz Bandwidth measured with 1µf capacitor General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight www.aimtec.com F 051e R12.B Conditions Typical 100% load Derating above 70 330 Maximum Units 100 KHz oC oC oC 95 % -40 to +85 -55 to +125 Free air convection Plastic (UL94V-0 rated) 13 Tel: +1 514 620 2722 2 of 5 g Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3TIW-RZ 3 Watt | DC-DC Converter General Specifications (continued) Parameters Dimensions (L x W x H) MTBF Conditions Typical Maximum Units Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm >800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval Standards CE, UL IEC/EN 60950-1 EN 55022 Class A EN 55024 Class A IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A IEC61000-4-5, Perf. Criteria A IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Pin Out Specifications Pin Single Dual 2 3 9 11 14 16 22 23 -V Input -V Input Omitted N.C. +V Output -V Output +V Input +V Input -V Input -V Input Common -V Output +V Output Common +V Input +V Input Dimensions www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3TIW-RZ 3 Watt | DC-DC Converter Derating Free Air Convection 70 ºC Output Power % 100 80 60 Safe Operating Area 40 20 0 85 -40 -20 0 20 40 60 80 100 Ambient Temperature º C Input Reflected Ripple Current Test Circuit www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3TIW-RZ 3 Watt | DC-DC Converter Typical Efficiency Example Charts Eff % AM3TIW‐2405S‐RZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 40% 60% 80% 100% Loading % Eff % AM3TIW‐4812S‐RZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 40% 60% 80% 100% Loading % NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only