CIT A101CS12VDC Switching capacity up to 30a Datasheet

A10
RoHS Compliant
12.0 (23.8) x 12.9 x 9.9 mm
Features
•
•
•
•
•
Switching capacity up to 30A
Dual relay available
Withstands high temperature : 105oC operating temperature
PC pin mounting available
Ultra light weight : 4g
Contact Data*
Contact Arrangement
Contact Rating
1A = SPST N.O.
Contact Resistance
< 30 milliohms initial
1C = SPDT
Contact Material
AgSnO2
2A = (2) SPST N.O.
Max Switching Power
420W
2C = (2) SPDT
Max Switching Voltage
28VDC
1A : 25A, 30A @ 14VDC
Max Switching Current
40A On, 30A Off
(current flow 3 sec max with make/
break ratio of 1:10)
1C : 25A, 30A @ 14VDC N.O.
1C : 20A, 25A @ 14VDC N.C.
Limiting Continuous Current
2A : 25A, 30A @ 14VDC
NO/NC : 30A/25A @ 23oC
NO/NC : 25A/20A @ 85oC
2C : 25A, 30A @ 14VDC N.O.
2C : 20A, 25A @ 14VDC N.C.
Coil Data*
Coil Voltage
VDC
Coil Resistance
Ω +/- 10%
Pick Up Voltage
VDC (max)
Release Voltage
VDC (min)
70% of rated voltage
10% of rated voltage
Rated
Max
5
6.0
45
3.50
0.5
9
10.8
147
6.30
0.9
10
12.0
181
7.00
1.0
12
14.4
254
8.40
1.2
24
28.8
1152
16.80
2.4
Coil Power
W
Operate Time
ms
.55
Release Time
ms
≤3
.57
≤ 1.5
.55
≤4
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
500V rms min. @ sea level initial
Contact to Contact
*
Values can change due to the switching frequency, desired
reliability levels, environmental conditions and in-rush load levels.
It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance
suitability for their specific application. The use of any coil voltage
less than the rated coil voltage may compromise the operation of
the relay.
500V rms min. @ sea level initial
300m/s2 for 6 ms
Shock Resistance
Vibration Resistance
1.27mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
10N
Operating Temperature
-40oC to +105oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
4g, 8g
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
A10
Ordering Information
1. Series
A10
1C
S
12VDC
A10
2. Contact Arrangement
1A = SPST N.O.
1C = SPDT
2A = (2) SPST N.O.
2C = (2) SPDT
3. Sealing Option
S = Sealed
4. Coil Voltage
5VDC
9VDC
10VDC
12VDC
24VDC
Dimensions
Units = mm
10.00
[.39]
2.90 TYP
[.11]
1.40
[.06]
13.05
[.51]
2.30
[.09]
23.64
[.93]
12.04
[.47]
9.85
[.39]
2.90 TYP
[.11]
2.24
[.09]
1.60
[.06]
13.10
[.52]
Schematics & PC Layouts
Bottom Views
7.50
[.30]
0.50
[.02]
3.10
[.12]
7.00
[.28]
7.85
[.31]
0.85
[.03]
1A
(2X) Ø0.75
[.03]
3.75
[.15]
(3X) Ø1.25
[.05]
1C
3.50
[.14]
(6X) Ø1.25
[.05]
3.00
[.12]
0.95
[.04]
7.85
[.31]
7.10
[.28]
7.10
[.28]
0.45
[.02]
(4X) Ø0.75
[.03]
2A
page 2
0.45
[.02]
7.85
[.31]
0.95
[.04]
3.50
[.14]
3.00
[.12]
19.16
[.75]
2C
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
Specifications and availability subject to change without notice.
Similar pages