EL5132, EL5133 ® Data Sheet October 26, 2005 670MHz Low Noise Amplifiers Features The EL5132 and EL5133 are ultra-low voltage noise, high speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. These devices offer extremely low power consumption for exceptional noise performance. Stable at gains as low as 10, these devices offer 120mA of drive performance. Not only do these devices find perfect application in high gain applications, they maintain their performance down to lower gain settings. • 670MHz -3dB bandwidth These amplifiers are available in small package options (SOT-23) as well as the industry-standard SO packages. All parts are specified for operation over the -40°C to +85°C temperature range. Pinouts FN7382.5 • Ultra low noise 0.9nV/√Hz • 1000V/µs slew rate • Low supply current = 12mA • Single supplies from 5V to 12V • Dual supplies from ±2.5V to ±5V • Fast disable on the EL5132 • Low cost • Pb-free plus anneal available (RoHS compliant) Applications • Imaging EL5132 (8 LD SO) TOP VIEW • Instrumentation • Communications devices NC 1 8 CE IN- 2 7 VS+ IN+ 3 + 6 OUT VS- 4 5 NC EL5133 (5 LD SOT-23) TOP VIEW OUT 1 VS- 2 5 VS+ + - IN+ 3 4 IN- Ordering Information PART NUMBER PART MARKING PACKAGE TAPE & REEL PKG. DWG. # EL5132IS 5132IS 8 Ld SO - MDP0027 EL5132IS-T7 5132IS 8 Ld SO 7” MDP0027 EL5132IS-T13 5132IS 8 Ld SO 13” MDP0027 EL5132ISZ (See Note) 5132ISZ 8 Ld SO (Pb-free) - MDP0027 EL5132ISZ-T7 (See Note) 5132ISZ 8 Ld SO (Pb-free) 7” MDP0027 EL5132ISZ-T13 5132ISZ (See Note) 8 Ld SO (Pb-free) 13” MDP0027 BCAA 5 Ld SOT-23 7” (3K pcs) MDP0038 EL5133IW-T7A BCAA 5 Ld SOT-23 7” MDP0038 (250 pcs) EL5133IW-T7 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003-2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL5132, EL5133 Absolute Maximum Ratings (TA = 25°C) Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +125°C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C Supply Voltage from VS+ to VS- . . . . . . . . . . . . . . . . . . . . . . . 13.2V IIN-, IIN+, CE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5mA Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications PARAMETER VS+ = +5V, VS- = -5V, RL = 500Ω, RF = 225Ω, RG = 25Ω, TA = 25°C, unless otherwise specified. DESCRIPTION CONDITIONS MIN TYP MAX UNIT -1 0.5 1 mV VOS Offset Voltage TCVOS Offset Voltage Temperature Coefficient Measured from TMIN to TMAX IB Input Bias Current VIN = 0V 8 12 20 µA IOS Input Offset Current VIN = 0V -1250 400 +1250 nA TCIOS Input Bias Current Temperature Coefficient Measured from TMIN to TMAX PSRR Power Supply Rejection Ratio VS+ = ±4.75V to ±5.25V CMRR Common Mode Rejection Ratio CMIR 0.8 µV/°C 3 nA/°C 75 87 dB VIN = ±3.0 V 80 100 dB Common Mode Input Range Guaranteed by CMRR test ±3 ±3.3 V RIN Input Resistance Common mode 2 5 MΩ CIN Input Capacitance 2 pF IS Supply Current AVOL Open Loop Gain VOUT = ±2.5V, RL = 1kΩ to GND VO Output Voltage Swing RF = 900Ω, RG = 100Ω, RL = 150Ω ISC Short Circuit Current RL = 10Ω BW -3dB Bandwidth BW ±0.1dB Bandwidth GBWP Gain Bandwidth Product PM Phase Margin RL = 1kΩ, CL = 6pF SR Slew Rate RL = 100Ω, VOUT = ±2.5V tR, tF Rise Time, Fall Time OS 9.2 11 5 8.5 KV/V ±3.1 3.5 V 70 140 mA AV = +10, RL = 1kΩ 670 MHz AV = +10, RL = 1kΩ 90 MHz 3000 MHz 55 ° 1000 V/µs ±0.1VSTEP TBD ns Overshoot ±0.1VSTEP TBD % tPD Propagation Delay ±0.1VSTEP TBD ns tS 0.01% Settling Time 6.6 ns dG Differential Gain AV = +2, RF = 1kΩ 0.01 % dP Differential Phase AV = +2, RF = 1kΩ 0.01 ° eN Input Noise Voltage f = 10kHz 0.9 nV/√Hz iN Input Noise Current f = 10kHz 4.9 pA/√Hz 2 700 13 mA EL5132, EL5133 Typical Performance Curves VS=±5V AV=+10 RG=25 RL=500Ω CL=+1pF 3 2 300 5 240 4 180 NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 4 120 GAIN 1 60 0 0 -60 -1 PHASE (°) 5 -120 -2 PHASE -3 -180 3 2 1 0 -1 -2 -3 -4 -240 -4 -5 100k -300 -5 100k 1M 10M 100M 1G -3dB BW @ 700MHz 1M FREQUENCY (Hz) 0.5 5 0.4 4 0.3 0.1dB BW @ 30MHz 0.2 0.1 0 -0.1 -0.2 -0.3 2 0 -1 -2 AV=+30 -3 -4 -5 100k 100M VS=±5V RL=500Ω 60 50 40 GAIN=40dB or 100 FREQ.=31.6MHz GAIN BW PRODUCT=31.6x100=3160MHz 30 20 1.0 10.0 100.0 FREQUENCY (MHz) FIGURE 5. GAIN BANDWIDTH PRODUCT 3 AV=+20 1M 10M 100M FREQUENCY (Hz) 1G FIGURE 4. GAIN vs FREQUENCY FOR VARIOUS +AV GAIN-BANDWIDTH PRODUCT (MHz) 70 AV=+10 1 -0.5 100k FIGURE 3. 0.1dB BANDWIDTH GAIN (dB) 3 VS=±5V RG=25Ω RL=500Ω CL=+1pF -0.4 10M FREQUENCY (Hz) 1G FIGURE 2. -3dB BANDWIDTH NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) FIGURE 1. GAIN & PHASE vs FREQUENCY 10M 100M FREQUENCY (Hz) 4000 3500 VS=±5V RL=500Ω 3000 2500 2000 1500 1000 3.0 3.5 4.0 4.5 5.0 5.5 6.0 SUPPLY VOLTAGES (±V) FIGURE 6. GAIN BANDWIDTH PRODUCT vs SUPPLY VOLTAGES EL5132, EL5133 Typical Performance Curves (Continued) NORMALIZED GAIN (dB) 4 3 2 5 AV=+10 RG=25Ω RL=500Ω CL=+1pF 4 NORMALIZED GAIN (dB) 5 VS=±4 1 0 -1 VS=±6 -2 VS=±5V -3 VS=±3V -4 -5 100k 10M 100M 2 RL=1kΩ 1 0 -1 -2 RL=100Ω RL=150Ω -3 RL=500Ω -4 VS=±2.5V 1M 3 VS=±5V AV=+10 RG=25Ω CL=+1pF -5 100k 1G 1M FREQUENCY (Hz) FIGURE 7. GAIN vs FREQUENCY FOR VARIOUS ±VS NORMALIZED GAIN (dB) 4 3 2 5 VS=±5V AV=+20 RG=25Ω CL=+1pF 4 RL=1kΩ 1 0 -1 RL=500Ω RL=150Ω -2 -3 RL=100Ω -4 -5 100k 1M 10M 100M FREQUENCY (Hz) 3 2 1 3 2 1 CL=23pF CL=12pF 0 -1 -2 CL=1pF CL=1pF -2 -3 4 10M 3 2 VS=±5V AV=+10 RL=500Ω CL=+1pF 100M 1G 0 -1 -2 FIGURE 11. GAIN vs FREQUENCY FOR VARIOUS CLOAD (AV = +20) RF=90Ω -3 -5 100k 1G RF=900Ω RF=450Ω 1 -4 10M 100M FREQUENCY (Hz) 1M FIGURE 10. GAIN vs FREQUENCY FOR VARIOUS CLOAD (AV = +10) -5 100k 4 CL=6.8pF 0 -4 1M CL=12pF FREQUENCY (Hz) CL=39pF -3 CL=3.3pF -1 5 VS=±5V AV=+20 RG=25Ω RF=475 RL=500Ω VS=±5V AV=+10 RG=25Ω RF=225Ω RL=500Ω -5 100k 1G NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 4 1G -4 FIGURE 9. GAIN vs FREQUENCY FOR VARIOUS RLOAD (AV = +20) 5 100M FIGURE 8. GAIN vs FREQUENCY FOR VARIOUS RLOAD (AV = +10) NORMALIZED GAIN (dB) 5 10M FREQUENCY (Hz) RF=225Ω 1M 10M 100M 1G FREQUENCY (Hz) FIGURE 12. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +10) EL5132, EL5133 Typical Performance Curves (Continued) 5 2 RF=1.9kΩ 1 0 -1 -2 RF=953Ω RF=190Ω -3 RF=475Ω -4 -5 100k VS=±5V AV=+10 RG=25Ω RL=500Ω CL=+1pF 4 1M 10M 100M 3 2 1 0 CIN=2.2pF -2 CIN=0pF -3 -4 -5 100k 1G FIGURE 13. GAIN vs FREQUENCY FOR VARIOUS RF (AV = +20) 1M 2 1 CIN=15pF CIN=12pF 0 -1 CIN=8.2pF -2 -3 -5 100k 1M 10M 100M FREQUENCY (Hz) 300 240 70 180 60 120 50 60 OPEN LOOP PHASE 40 0 30 -60 OPEN LOOP GAIN 20 -120 10 -180 0 -240 -10 1G 1k 10k 100k 1M 10M 100M 1G -300 FREQUENCY (Hz) FIGURE 15. GAIN vs FREQUENCY FOR VARIOUS CIN (AV = +20) FIGURE 16. OPEN LOOP GAIN & PHASE vs FREQUENCY -10 VS=±5V -20 -30 10 CMRR (dB) OUTPUT IMPEDANCE (Ω) 1G Vs=±5V 80 CIN=0pF -4 100 90 OPEN LOOP GAIN (dB) NORMALIZED GAIN (dB) 3 10M 100M FREQUENCY (Hz) FIGURE 14. GAIN vs FREQUENCY FOR VARIOUS CIN(-) (AV = +10) CIN=22pF VS=±5V AV=+20 RG=25Ω RL=500Ω CL=+1pF 4 CIN=3.9pF -1 FREQUENCY (Hz) 5 CIN=6.8pF 1 AV=+10 VS=±5V -40 -50 -60 -70 -80 0.10 -90 -100 0.01 10k 100k 1M 10M 100M -110 1k 10k 100k 1M 10M 100M 500M FREQUENCY (MHz) FREQUENCY (Hz) FIGURE 17. OUTPUT IMPEDANCE vs FREQUENCY FIGURE 18. CMRR vs FREQUENCY 5 PHASE (°) 3 5 VS=±5V AV=+20 RL=500Ω CL=+1pF NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 4 EL5132, EL5133 Typical Performance Curves (Continued) 10 OUTPUT SWING GAIN (dB) -10 PSRR (dB) 5 AV=+10 VS=±5V 0 -20 -30 -40 -50 VS- -60 -70 VS+ -80 -90 1k 10k 100k 1M 10M 3 2 1 VOUT=240mVp-p 0 -1 VOUT=670mVp-p -2 VOUT=2.1Vp-p -3 VOUT=3.8Vp-p -4 -5 100M 500M VS=±5V AV=+10 RG=25Ω RL=500Ω CL=+1pF 4 VOUT=6.6Vp-p 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 FIGURE 20. OUTPUT SWING vs FREQUENCY -40 VS=±5V AV=+10 RG=25Ω RL=500Ω -60 -70 -80 INPUT TO OUTPUT -90 OUTPUT TO INPUT -100 -110 -120 -130 0 1M 10M 100M -140 100k 1G 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) FIGURE 21. GROUP DELAY vs FREQUENCY FIGURE 22. INPUT & OUTPUT ISOLATION -20 VS=±5V -40 AV=+10 RG=25Ω -50 RL=500Ω VOUT=2Vp-p HARMONIC DISTORTION (dBc) -30 HARMONIC DISTORTION (dBc) VS=±5V AV=+20 RG=25 CHIP DISABLED -50 ISOLATION (dB) GROUP DELAY (ns) FIGURE 19. PSRR vs FREQUENCY 1G T.H.D -60 -70 -80 2nd H.D 3rd H.D -90 -100 -40 5 10 15 20 25 30 35 FUNDAMENTAL FREQUENCY (MHz) 40 FIGURE 23. HARMONIC DISTORTION vs FREQUENCY 6 FIN=10MHz -50 -60 -70 -80 -90 -100 0 VS=±5V AV=+10 RG=25Ω RL=500Ω -30 FIN=1MHz 0 1 2 3 4 5 6 OUTPUT LEVEL (Vp-p) 7 8 FIGURE 24. TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE EL5132, EL5133 Typical Performance Curves (Continued) 6 4 ENABLE SIGNAL 3 2 1 0 -1 -3 -400 -200 0 200 400 600 4 DISABLE SIGNAL 3 OUTPUT SIGNAL 2 1 0 -1 OUTPUT SIGNAL -2 VS=±5V RL=500Ω VOUT=2Vp-p 5 AMPLITUDE (V) AMPLITUDE (V) 6 VS=±5V RL=500Ω VOUT=2Vp-p 5 800 -2 -1000 -800 -600 -400 -200 0 TIME (ns) 1000 1200 TIME (ns) FIGURE 25. ENABLE TIME 1000.0 CURRENT NOISE (pA/√Hz) VS=±5V 10.0 1.0 0.1 0.0 10 100 1k 10k FREQUENCY (Hz) 100k AMPLITUDE (V) 1.0 0.1 0.2 1.0 0.0 TRISE=2.12ns -0.4 -40 -20 0 RL=500Ω CL=+1pF VOUT=500mV 20 40 60 80 100 120 140 160 180 TIME (ns) FIGURE 29. SMALL SIGNAL STEP RESPONSE_RISE & FALL TIME 7 10 100 1k 10k 100k FREQUENCY (Hz) 1M FIGURE 28. EQUIVALENT INPUT CURRENT NOISE vs FREQUENCY 2.0 TFALL=2.02ns VS=±5V 10.0 0.4 VS=±5V AV=+10 RG=25Ω 600 100.0 1M FIGURE 27. EQUIVALENT INPUT VOLTAGE NOISE vs FREQUENCY -0.2 400 FIGURE 26. DISABLE TIME AMPLITUDE (V) VOLTAGE NOISE (nV/√Hz) 100.0 200 TFALL=2.05ns 0.0 TRISE=2.02ns -1.0 -2.0 -40 -20 0 VS=±5V AV=+10 RG=25Ω RL=500Ω CL=1pF VOUT=2.0V 20 40 60 80 100 120 140 160 180 TIME (ns) FIGURE 30. LARGE SIGNAL STEP RESPONSE_RISE & FALL TIME EL5132, EL5133 Typical Performance Curves (Continued) 1200 RG=25Ω RL=500Ω CL=+1pF 11.8 11.6 1000 11.4 11.2 11.0 10.8 10.6 Please note that the curve showed positive current. The negative current was almost the same. 10.4 10.2 10.0 2.5 3.0 3.5 4.0 4.5 5.0 SUPPLY VOLTAGE (V) 5.5 6.0 700 0.8 0.6 500 300 2.0 SO8 θJA=110°C/W 0.4 SOT23-5 θJA=230°C/W 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) FIGURE 33. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE 8 2.5 3.0 3.5 4.0 4.5 5.0 SUPPLY VOLTAGES (±V) 5.5 6.0 FIGURE 32. SLEW RATE vs SUPPLY VOLTAGES 1 435mW 0.2 AV=+10 RG=25Ω RL=500Ω CL=+1pF VOUT=4Vp-p 600 POWER DISSIPATION (W) POWER DISSIPATION (W) 1 909mW NEGATIVE SLEW RATE 800 JEDEC JESD51-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 1.2 0 900 400 FIGURE 31. SUPPLY CURRENT vs SUPPLY VOLTAGE 1.4 POSITIVE SLEW RATE 1100 SLEW RATE (V/µs) SUPPLY CURRENT (mA) 12.0 JEDEC JESD51-3 LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD 0.9 0.8 0.7 625mW 0.6 0.5 SO8 θJA=160°C/W 391mW 0.4 0.3 SOT23-5 θJA=256°C/W 0.2 0.1 0 0 25 50 75 85 100 125 150 AMBIENT TEMPERATURE (°C) FIGURE 34. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE EL5132, EL5133 DIFFERENTIAL GAIN (%) Typical Performance Curves (Continued) 0.20 0.15 0.05 0 -0.05 -0.15 -0.20 0 10 20 30 40 50 60 70 80 90 100 80 90 100 DIFFERENTIAL PHASE (°) FIGURE 35. DIFFERENTIAL GAIN (%) 0.20 0.15 0.05 0 -0.05 -0.15 -0.20 0 10 20 30 40 50 60 70 FIGURE 36. DIFFERENTIAL PHASE (°) All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 9