OPF79X Series Features: High speed, low capacitance Popular ST style receptacle Pre-tested with fiber to assure performance Component pre-mounted and ready to use 100MHz operation minimum Description: The OPF79X is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF79x series is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems Package Material RoHS Part Number Body Material Body Style OPF792 Conductive Plastic ST OPF794 Zinc, Die Cast ST-LP ST is a registered trademark of AT&T. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue C 08/2016 Page 1 OPF79X Series Mechanical Data - OPF792 DIMENSIONS ARE IN: General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc [MILLIMETERS] INCHES OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue C 08/2016 Page 2 OPF79X Series Mechanical Data - OPF794 DIMENSIONS ARE IN: General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc [MILLIMETERS] INCHES OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue C 08/2016 Page 3 OPF79X Series Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -55° C to +100° C Operating Temperature Range -40° C to +85° C Lead Soldering Temperature(1) 260° C Maximum Reverse Voltage 50 VDC Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP 0.45 0.55 MAX UNITS R Responsivity ID Dark Current 0.5 p Peak Response Wavelength 800 nm tr Output Rise Time 2.0 ns Bandwidth 175 MHz BW A/W 5.0 nA TEST CONDITIONS VR = 5.0V; 50/125µm fiber; = 850nm VR = 5.0V VR = 5.0V; RL = 50W, 10%-90% VR = 5.0V Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue C 08/2016 Page 4 OPF79X Series Performance General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www.ttelectronics.com Issue C 08/2016 Page 5