¡ Semiconductor 1A MSM27C1655CZ 524,288-Double Word x 32-Bit or 1,048,576-Word x 16-Bit 4-Double Word x 32-Bit or 8-Word x 16-Bit Page Mode One Time PROM DESCRIPTION The MSM27C1655CZ is a 16Mbit electrically Programmable Read-Only Memory with page mode. Its configuration can be electrically switched between 524,288 double word x 32bit and 1,048,576 word x 16bit. The MSM27C1655CZ operates on a single +5V power supply and is TTL compatible. The MSM27C1655CZ provides Page mode which can greatly reduce the read access time. Since the MSM27C1655CZ operates asynchronously , external clocks are not required , making this device easy-to-use. The MSM27C1655CZ is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 70-pin SSOP , 70-pin TSOP packages. FEATURES • 524,288 double word x 32bit / 1,048,576 word x 16bit electrically switchable configuration • Single +5V power supply • Access time 100ns Page mode access time 30ns • Input / Output TTL compatible • Three-state output • Packages 70-pin plastic SSOP (SSOP70-P-500-0.80-K) 70-pin plastic TSOP (TSOPII70-P-400-0.65-K) 1 MSM27C1655CZ PIN CONFIGURATION (TOP VIEW) A0 1 70 VPP A1 2 69 NC A2 3 68 NC A3 4 67 WORD A4 5 66 OE A5 6 VCC 7 65 CE 64 VSS D0 8 63 D31/A-1 D16 9 62 D15 D1 10 61 D30 D17 11 VSS 12 VCC 13 60 D14 59 VSS 58 VCC D2 14 57 D29 D18 15 56 D13 D3 16 55 D28 D19 17 54 D12 D4 18 53 D27 D20 19 52 D11 D5 20 51 D26 D21 21 VSS 22 VCC 23 50 D10 49 VSS 48 VCC D6 24 47 D25 D22 25 D7 26 46 D9 PIN NAMES FUNCTIONS 45 D24 D31/A-1 Data output / Address input D23 27 VSS 28 44 D8 43 VCC A0 - A18 Address input D0 - D30 Data output A6 29 42 NC CE Chip enable A7 30 41 A18 Output enable A8 31 40 A17 OE VCC A9 32 39 A16 VSS GND A10 33 38 A15 A11 34 37 A14 WORD VPP A12 35 36 A13 NC Power supply voltage Mode switch Program power supply voltage Non connection 70-pin SSOP , TSOP 2 MSM27C1655CZ BLOCK DIAGRAM A-1 OE WORD CE OE PGM Row Decoder CE Memory Matrix 524,288X32-Bit or 1,048,576X16-Bit Column Decoder A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 Address Buffer X16/X32 Switch Multiplexer & Page Data Latch Output Buffer D30 D28 D26 D24 D22 D20 D18 D16 D14 D12 D10 D8 D6 D4 D2 D0 D31 D29 D27 D25 D23 D21 D19 D17 D15 D13 D11 D9 D7 D5 D3 D1 In 16-bit output mode, these pins are three-stated and pin D31 functions as the A-1 address pin. FUNCTION TABLE CE OE WORD READ (32-Bit) L L H READ (16-Bit) L L L OUTPUT DISABLE L MODE H STAND-BY H * PROGRAM L H PROGRAM INHIBIT H H PROGRAM VERIFY * : Don't Care 3 H L H L VPP VCC * 4.5V to 5.5V D0 - D15 D16 - D30 DOUT D31/A-1 DOUT Hi-Z L/H Hi-Z * H Hi-Z L DIN L 11.5V Hi-Z * L/H Hi-Z 6.25V DOUT Hi-Z L/H MSM27C1655CZ ABSOLUTE MAXIMUM RATINGS Symbol Parameter Operating temperature under bias Topr Storage temperature Tstg Condition Output voltage VO Power supply voltage Program power supply voltage VCC VPP Power dissipation per package PD Unit -55 to 125 °C °C -0.5 to VCC + 0.5 V -0.5 to VCC + 0.5 V -0.5 to 7 V - VI Input voltage Value 0 to 70 relative to VSS - -0.5 to 12.5 V 1.0 W RECOMMENDED OPERATING CONDITIONS FOR READ (Ta=0 to 70°C) Parameter Symbol VCC power supply voltage VCC VPP power supply voltage VPP Input "H" level VIH Input "L" level VIL Condition VCC=4.5V-5.5V Min. Typ. Max. 4.5 5.5 Unit V -0.5 - VCC+0.5 V 2.2 - VCC+0.5 V -0.5 - 0.8 V Voltage is relative to Vss 4 MSM27C1655CZ ELECTRICAL CHARACTERISTICS (Read operation) DC Characteristics (VCC=5V±0.5V, Ta=0 to 70°C) Symbol ILI Condition VI=0 to Vcc Min. - Typ. - Max. Output leakage current ILO VO=0 to Vcc - - 10 µA VCC power supply current (Standby) ICS1 CE=VCC 50 CE=VIH - µA ICS2 - 1 mA - - 120 mA - - µA Parameter Input leakage current 10 Unit µA VCC power supply current (Read) ICCA VPP power supply current IPP Input "H" level VIH - 2.2 - 10 VCC+0.5 Input "L" level VIL - -0.5 - 0.8 V Output "H" level VOH IOH=-400µA - - V Output "L" level VOL IOL=2.1mA 2.4 - 0.45 V CE=VIL , OE=VIH tc=100ns VPP=VCC V Voltage is relative to Vss AC Characteristics (VCC=5V±0.5V, Ta=0 to 70°C) Symbol Condition Min. Max. Unit - 100 - - ns Address access time TC TACC 100 ns Page set up time TPSET 120 - ns 30 - - ns 30 ns Parameter Address access cycle time CE=OE=VIL NOTE(1) - Page access cycle time TPC Page access time TPAC TCE TOE OE=VIL - 100 ns CE=VIL - 30 ns TCHZ OE=VIL CE=VIL 0 0 30 TOHZ TOH CE=OE=VIL 0 ns ns ns CE access time OE access time Output disable time Output hold time - 25 - NOTE(1) TPSET is defined as the end of either CE trailing edge or address transition in random access term until the first page address transition. Measurement conditions Input signal level Input timing reference level Output load Output timing reference level 0V/3V 0.8V/2.0V 1TTL gate + 100pF 0.8V/2.0V 1.7V 400 Output 100pF (including jig capacitance) 5 MSM27C1655CZ TIMING CHART NORMAL MODE READ CYCLE tC ADDRESS tOH tCE CE tCHZ tOE OE tACC tOHZ Valid Data DOUT Hi-Z Hi-Z PAGE MODE READ CYCLE tC A2 - A18 tPSET tPSET tPC tPC A0 - A1 (X32 mode) A-1 - A1 (X16 mode) tOH tCE CE tCHZ tOE OE tACC tPAC tPAC tOHZ DOUT Hi-Z Hi-Z 6 MSM27C1655CZ ELECTRICAL CHARACTERISTICS (Programming operation) DC Characteristics (Ta=25°C±5°C) Parameter Input leakage current Symbol ILI VI=VCC+0.5V Condition Min. - Typ. - Max. 10 Unit µA VPP power supply current (Program) IPP2 - 50 mA ICC CE=VIL - - VCC power supply current - - 100 mA Input "H" level VIH - 2.2 VCC+0.5 V Input "L" level VIL - -0.5 - Output "H" level VOH IOH=-400µA 2.4 - 0.8 - V V Output "L" level VOL - - 0.45 V Program voltage VPP IOL=2.1mA - 11.5 11.75 V VCC power supply voltage VCC - 11.25 6.0 6.25 6.5 V Voltage is relative to Vss AC Characteristics (Vcc=6.25V±0.25V,Vpp=11.5V±0.25V,Ta=25°C±5°C) Symbol TAS Condition - Min. 2 Typ. - Max. - Unit µs OE set-up time Data set-up time TOES - 2 - TDS - 2 - - µs µs Address hold time TAH - 0 - - µs Data hold time Output float delay from OE TDH - 2 - - TDFP 0 - 130 µs ns - 2 - - µs Program pulse width TVS TPW 23 25 27 µs Data valid from OE TOE - - - 150 ns Parameter Address set-up time VPP voltage set-up time 7 MSM27C1655CZ Programming Waveform A-1 - A18 tAS tAH tPW CE tOES tDS OE tDFP tDH tOE DIN D0 - D15 DOUT tVS VPP Program Program Verify D16 - D30 Hi-Z PIN Capacitance (VCC=5V, Ta=25°C, f=1MHz) Parameter Input VPP Output Symbol CIN1 CIN2 COUT Condition VI=0V VO=0V Min. - Typ. - Max. 12 Unit - - 60 pF - - 15 8 MSM27C1655CZ High Speed Programming Algorithm ( I ) Start First Address VCC=6.25V VPP=11.5V X=0 X=10 ? YES NO Program 25µs Increment Address X=X+1 NG Verify (One Byte) PASS NO Last Address ? YES VCC=5.5V VPP=5.5V Compare All NG PASS VCC=4.5V VPP=4.5V Compare All PASS Device Passed 9 NG Device Failed MSM27C1655CZ High Speed Programming Algorithm ( II ) Start First Address VCC=6.25V VPP=11.5V Program 25µs Increment Address NO Last Address ? YES First Address X=0 Verify (One Byte) NG X=X+1 PASS NO Increment Address YES Last Address ? X=10 ? YES NO VCC=5.5V VPP=5.5V Compare All Program 25µs NG PASS VCC=4.5V VPP=4.5V Compare All NG PASS Device Passed Device Failed 10 Semiconductor NOTICE The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-todate. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party’s right which may result from the use thereof. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system orapplication that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. No part of the contents cotained herein may be reprinted or reproduced without our prior permission. All brand, company and product names are the trademarks or registered trademarks of their respective owners. Copyright 1998 Oki Electric Industry Co., Ltd. ADDRESSES & SEMICONDUCTOR WEB SITES OKI Electric Industry Co., Ltd. Ltd., Device Business Group, 10-3, Shibaura, 4-chome, Minato-ku, Tokyo 108, Japan, Tel.: +81-(0)3-5445-6327, Fax.: +81-(0)3-5445-6328, http://www.oki.co.jp/OKI/DBG/english/index.htm (NOTE: URL is case sensitive) OKI Semiconductor Group Group, 785 North Mary Avenue, Sunnyvale, CA 94086, U.S.A., Tel.: +1-408-720-1900, Fax.: +1-408-720-1918, http://www.okisemi.com/ OKI Electric Europe GmbH GmbH, Head Office Europe, Hellersbergstrasse 2, D-41460 Neuss, Germany, Tel: +49-2131-15960, Fax: +49-2131-103539, http://www.oki-europe.de/ OKI Electronics (Hong Kong) Ltd. Ltd., Suite 1901-1&19, Tower 3, China Hong Kong City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel.: +852-2-736-2336, Fax.: +852-2-736-2395 OKI Semiconductor (Asia) Pte. Ltd. Ltd., 78 Shenton Way 09-01, Singapore 0207, Tel.: +65-221-3722, Fax.: +65-323-5376 OKI Semiconductor (Asia) Pte. Ltd. Ltd., Taipei Branch, 7th Fl. No.260, Tun Hwa North Road, Taipei, Taiwan, R.O.C., Sumitomo-Flysun Building, Tel.: +886-2-2719-2561, Fax.: +886-2-2715-2892 http://www.oki.net.tw/ For further information, please contact: People To People Technology