KILOVAC High Voltage Relays H-26 Series Make & Break Load Switching — 15 kV Relays Product Facts n n n n Highly reliable four pole double throw relay Used to switch multiple loads and for polarity reversal Vacuum dielectric for power switching low current loads Meets requirements of MIL-R-83725 Product Specifications Contact Arrangement — 4PDT Contact Form — 4C Test Voltage, DC or 60 Hz (Peak) — 17 kV Rated Operating Voltage (Peak) — DC or 60 Hz — 15 kV 2.5 MHz — 12 kV 16 MHz — 10 kV 32 MHz — 7 kV Continuous Carry Current, Max. — DC or 60 Hz — 30 A 2.5 MHz — 10 A 16 MHz — 6 A 32 MHz — 4 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Contact Capacitance — Between Open Contacts — 1 pF Open Contacts to Ground — 2.5 pF Contact Resistance, Max. — 0.02 ohm Operate Time, Max. — 30 ms Release Time, Max. — 30 ms Shock, 11ms, 1/2 Sine (Peak) — 30 g Vibration — Peak — 10 g (55 to 500 Hz) Operating Ambient Temperature Range — -55°C to +125°C Mechanical Life — 100,000 cycles Weight, Nominal — 340 g (12 oz.) Coil Data Volts, Nominal DC Pickup, Max. Dropout Coil Resistance (±10%) 12 V 8 Vdc .5-5 Vdc N/A 26.5 V 16 Vdc 1-10 Vdc 130 Ω 115 V 80 Vdc 5-50 Vdc 2100 Ω Ratings listed are for 25°C, sea level conditions Ordering Information Sample Part Number 䊳 H-26 /12Vdc Model: H-26 Coil Voltage: Blank = 26.5 Vdc /12Vdc = 12 Vdc /115Vdc = 115 Vdc For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. 7–76 Catalog 5-1773450-5 Revised 3-13 www.te.com Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters unless otherwise specified. USA: +1 800 522 6752 Asia Pacific: +86 0 400 820 6015 UK: +44 800 267 666 For additional support numbers please visit www.te.com