MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G http://onsemi.com Switch-mode Power Rectifiers This series is designed for use in switching power supplies, inverters and as free wheeling diodes. ULTRAFAST RECTIFIERS 8.0 AMPERES, 50−600 VOLTS Features • • • • • • • • • 1 Ultrafast 25 and 50 Nanosecond Recovery Time 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Low Forward Voltage Low Leakage Current Reverse Voltage to 600 V ESD Ratings: ♦ Machine Model = C (> 400 V) ♦ Human Body Model = 3B (> 16,000 V) SUR8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant* Mechanical Characteristics: 4 3 TO−220AC CASE 221B STYLE 1 • Case: Epoxy, Molded • Weight: 1.9 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds TO−220 FULLPAK CASE 221AG STYLE 1 MARKING DIAGRAMS AY WWG U8xx KA A Y WW U8XX G KA AYWWG MURF860 KA = = = = Assembly Location Year Work Week Device Code xx = 05, 10, 15, 20, 40, or 60 = Pb−Free Package = Diode Polarity ORDERING INFORMATION *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2014 February, 2014 − Rev. 13 1 See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet. Publication Order Number: MUR820/D MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G MAXIMUM RATINGS MUR/SUR8 Symbol 805 810 815 820 840 860 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C IF(AV) 8.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C IFM 16 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A TJ, Tstg −65 to +175 °C Rating Operating Junction Temperature and Storage Temperature Range Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS MUR/SUR8 Characteristic Symbol Maximum Thermal Resistance, Junction−to−Case RqJC Thermal Resistance, Junction−to−Case MURF860 RqJC Thermal Resistance, Junction−to−Ambient RqJA Thermal Resistance, Junction−to−Ambiente MURF860 RqJA 805 810 815 820 840 860 3.0 2.0 Unit °C/W °C/W 4.75 73 °C/W °C/W 75 ELECTRICAL CHARACTERISTICS MUR/SUR8 Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 A, TC = 150°C) (iF = 8.0 A, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 150°C) (Rated DC Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A) trr 805 810 815 0.895 0.975 820 840 860 1.00 1.30 1.20 1.50 250 5.0 500 10 35 25 60 50 Unit V mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://onsemi.com 2 MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G MUR805G, MUR810G, MUR815G, MUR820G, SUR8820G 1000 100 IR, REVERSE CURRENT (m A) 70 50 20 10 100°C 1.0 25°C 0.1 10 0.01 7.0 0 20 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) 40 5.0 Figure 2. Typical Reverse Current* 3.0 2.0 TJ = 175°C 100°C 25°C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 10 SQUARE WAVE 8.0 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 180 TC, CASE TEMPERATURE (°C) RqJA = 16°C/W RqJA = 60°C/W (NO HEAT SINK) dc 170 Figure 3. Current Derating, Case 14 12 160 150 Figure 1. Typical Forward Voltage IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 180 200 * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175°C 100 160 180 200 10 9.0 TJ = 175°C 8.0 7.0 SQUARE WAVE 6.0 dc 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation http://onsemi.com 3 9.0 10 MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G MUR840G, SUR8840G 100 1000 IR, REVERSE CURRENT (m A) 70 50 20 10 100°C 25°C 1.0 0.1 10 0.01 7.0 0 50 100 150 200 250 300 350 400 VR, REVERSE VOLTAGE (VOLTS) 5.0 TJ = 175°C * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 100°C 2.0 1.0 0.5 0.3 0.2 0.1 0.8 0.6 1.2 1.0 1.4 8.0 SQUARE WAVE dc SQUARE WAVE 0 0 20 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 150 160 40 60 80 100 120 140 160 180 200 10 9.0 TJ = 175°C 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient Figure 10. Power Dissipation http://onsemi.com 4 180 170 Figure 8. Current Derating, Case dc 2.0 dc 7.0 Figure 6. Typical Forward Voltage 12 4.0 RATED VR APPLIED 8.0 TC, CASE TEMPERATURE (°C) RqJA = 16°C/W RqJA = 60°C/W (NO HEAT SINK) 6.0 9.0 1.6 14 10 10 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.4 450 500 Figure 7. Typical Reverse Current* 25°C 0.7 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 150°C IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175°C 100 9.0 10 MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G 1000 100 TJ = 150°C IR, REVERSE CURRENT (m A) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) MUR860G, MURF860G 100°C 25°C 10 1 10 100°C 1.0 0.6 0.8 1.0 1.4 1.2 1.6 25°C 0.1 0.01 100 0.1 0.4 TJ = 150°C 100 1.8 200 vF, INSTANTANEOUS VOLTAGE (VOLTS) 300 500 400 VR, REVERSE VOLTAGE (VOLTS) 600 Figure 12. Typical Reverse Current* Figure 11. Typical Forward Voltage IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 160 150 170 10 9.0 RqJA = 16°C/W RqJA = 60°C/W (NO HEAT SINK) dc 8.0 7.0 6.0 SQUARE WAVE 5.0 4.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 180 0 20 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 13. Current Derating, Case Figure 14. Current Derating, Ambient 10,000 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 I FSM , NON-REPETITIVE SURGE CURRENT (A) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. SQUARE WAVE dc TJ = 175°C 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 1,000 100 10 100 1,000 10,000 IF(AV), AVERAGE FORWARD CURRENT (AMPS) tp, SQUARE WAVE PULSE DURATION (ms) Figure 15. Power Dissipation Figure 16. Typical Non−Repetitive Surge Current * Typical performance based on a limited sample size. ON Semiconductor does not guarantee ratings not listed in the Maximum Ratings table. http://onsemi.com 5 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX P(pk) 0.05 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) - TC = P(pk) ZqJC(t) t1 t2 SINGLE PULSE 0.02 DUTY CYCLE, D = t1/t2 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 17. Thermal Response r(t), TRANSIENT THERMAL RESPONSE (NORMALIZED) (°C/W) 10 D = 0.5 1.0 0.1 0.2 0.1 0.05 0.02 P(pk) 0.01 0.01 t1 SINGLE PULSE 0.001 0.000001 0.00001 t2 DUTY CYCLE, D = t1/t2 0.0001 0.001 0.01 t, TIME (s) 1.0 0.1 ZqJC(t) = r(t) RqJC RqJC = 1.6°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 10 100 1000 r(t), TRANSIENT THERMAL RESPONSE (NORMALIZED) (°C/W) Figure 18. Thermal Response, (MURF860G) Junction−to−Case (RqJC) 100 10 D = 0.5 0.2 0.1 0.05 0.02 1.0 0.01 P(pk) 0.1 0.01 0.001 0.000001 t1 SINGLE PULSE 0.00001 t2 DUTY CYCLE, D = t1/t2 0.0001 0.001 0.01 t, TIME (s) 0.1 1.0 ZqJC(t) = r(t) RqJC RqJC = 1.6°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 10 Figure 19. Thermal Response, (MURF860G) Junction−to−Ambient (RqJA) http://onsemi.com 6 100 1000 MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G 1000 C, CAPACITANCE (pF) 500 TJ = 25°C 200 100 50 20 10 1.0 2.0 10 5.0 20 VR, REVERSE VOLTAGE (V) 50 100 Figure 20. Typical Capacitance ORDERING INFORMATION Device Package Shipping MUR805G TO−220AC (Pb−Free) 50 Units / Rail MUR810G TO−220AC (Pb−Free) 50 Units / Rail MUR815G TO−220AC (Pb−Free) 50 Units / Rail MUR820G TO−220AC (Pb−Free) 50 Units / Rail SUR8820G TO−220AC (Pb−Free) 50 Units / Rail MUR840G TO−220AC (Pb−Free) 50 Units / Rail SUR8840G TO−220AC (Pb−Free) 50 Units / Rail MUR860G TO−220AC (Pb−Free) 50 Units / Rail MURF860G TO−220FP (Pb−Free) 50 Units / Rail http://onsemi.com 7 MUR805G, MUR810G, MUR815G, MUR820G, MUR840G, MUR860G, MURF860G, SUR8820G, SUR8840G PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D J G INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.039 0.142 0.161 0.190 0.210 0.110 0.130 0.014 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 1.00 3.61 4.09 4.83 5.33 2.79 3.30 0.36 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 STYLE 1: PIN 1. 2. 3. 4. CATHODE N/A ANODE CATHODE TO−220 FULLPAK, 2−LEAD CASE 221AG ISSUE A A E B P E/2 0.14 M B A M A H1 A1 4 Q D C NOTE 3 1 2 3 L L1 3X 3X b2 c b 0.25 M B A M C A2 e e1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR UNCONTROLLED IN THIS AREA. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH AND GATE PROTRUSIONS. MOLD FLASH AND GATE PROTRUSIONS NOT TO EXCEED 0.13 PER SIDE. THESE DIMENSIONS ARE TO BE MEASURED AT OUTERMOST EXTREME OF THE PLASTIC BODY. 5. DIMENSION b2 DOES NOT INCLUDE DAMBAR PROTRUSION. LEAD WIDTH INCLUDING PROTRUSION SHALL NOT EXCEED 2.00. MILLIMETERS DIM MIN MAX A 4.30 4.70 A1 2.50 2.90 A2 2.50 2.90 b 0.54 0.84 b2 1.10 1.40 c 0.49 0.79 D 14.22 15.88 E 9.65 10.67 e 2.54 BSC e1 5.08 BSC H1 5.97 6.48 CATHODE N/A L 12.70 14.73 ANODE L1 --2.80 P 3.00 3.40 Q 2.80 3.20 SEATING PLANE STYLE 1: PIN 1. 2. 3. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 8 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR820/D