MACOM MAAPGM0019 9.8-13.0 ghz 1.6 w power amplifier Datasheet

9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
Features
♦ 1.6 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process
Primary Applications
♦ 11 GHz Point-to-Point Radio
♦ 13 GHz Point-to-Point Radio
♦ SatCom
APGM0019
YWWLLLL
Description
The MAAPGM0019 is a packaged, 3-stage, 1.6 W power
amplifier with on-chip bias networks in a bolt down ceramic
package, allowing easy assembly. This product is fully
matched to 50 ohms on both the input and output. It can be
used as a power amplifier stage or as a driver stage in high
power applications.
Pin Number
RF Designator
1
No Connection
Fabricated using M/A-COM’s repeatable, high performance and
highly reliable GaAs Multifunction Self-Aligned Gate MESFET
Process, each device is 100% RF tested on wafer to ensure
performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted
transistors, multiple implant capability enabling power, low-noise,
switch and digital FETs on a single chip, and polyimide scratch
protection for ease of use with automated manufacturing
processes. The use of refractory metals and the absence of
platinum in the gate metal formulation prevents hydrogen
poisoning when employed in hermetic packaging.
2
VGG
3
RF IN
4
VGG
5
No Connection
6
VDD1/2
7
VDD3
8
RF OUT
9
VDD3
10
VDD1/2
Maximum Operating Conditions 1
Parameter
Symbol
Absolute Maximum
Units
Input Power
PIN
25.0
dBm
Drain Supply Voltage
VDD
+12.0
V
Gate Supply Voltage
VGG
-3.0
V
Quiescent Drain Current (No RF, 40% IDSS)
IDQ
1.33
A
PDISS
8.8
W
Junction Temperature
TJ
180
°C
Storage Temperature
TSTG
-55 to +150
°C
Quiescent DC Power Dissipated (No RF)
1. Operation outside of these ranges may reduce product reliability.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
Recommended Operating Conditions
Characteristic
Symbol
Min
Typ
Max
Unit
V
Drain Supply Voltage
VDD
4.0
8.0
10.0
Gate Supply Voltage
VGG
-2.4
-2.0
-1.5
V
Input Power
PIN
20
23
dBm
Junction Temperature
TJ
Thermal Resistance
ΘJC
Package Base Temperature
TB
150
°C
11.0
°C/W
Note 2
°C
2. Maximum Package Base Temperature = 150°C — ΘJC* VDD * IDQ
Electrical Characteristics: TB = 40°C2, Z0 = 50 Ω, VDD = 8V, IDQ ≈ 830 mA3, Pin = 20 dBm, RG = 86.6 Ω
Parameter
Symbol
Typical
Units
Bandwidth
f
9.8-13.0
GHz
Output Power
POUT
32
dBm
Power Added Efficiency
PAE
20
%
1-dB Compression Point
P1dB
31
dBm
Small Signal Gain
G
19
dB
Input VSWR
VSWR
2:1
Output VSWR
VSWR
2.5:1
Gate Supply Current
IGG
< 10
mA
Drain Supply Current
IDD
< 1.3
A
Noise Figure
NF
10
dB
nd
2f
-37
dBc
rd
3 Harmonic
3f
-40
dBc
Output Third Order Intercept
OTOI
38
dBm
3 Order Intermodulation Distortion,
Single Carrier Level = 21 dBm
IM3
-9
dBm
5th Order Intermodulation Distortion,
Single Carrier Level = 21 dBm
IM5
-27
dBm
2 Harmonic
rd
3. Adjust VGG between –2.4 to –1.8V to achieve indicated IDQ
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device,
follow these steps.
1. Apply VGG ≈ -1.8V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8 V.
3. Adjust VGG to set IDQ, (See Note 3 above).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
50
50
POUT
PAE
40
40
30
30
20
20
10
10
0
0
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
Frequency (GHz)
Figure 1. Output Power and Power Added Efficiency vs. Frequency at VDD = 8V
and Pin = 20 dBm.
50
50
POUT
40
40
PAE
30
30
20
20
10
10
0
0
4
5
6
7
8
9
10
Drain Voltage (V)
Figure 2. Saturated Output Power and Power Added Efficiency vs. Drain Voltage at fo = 11.5 GHz.
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
40
35
30
25
20
15
10
5
9.5
VDD = 4
VDD = 6
VDD = 8
VDD = 10
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
Frequency (GHz)
Figure 3. 1dB Compression Point vs. Drain Voltage
30
6
Gain
Input VSWR
Output VSWR
25
5
20
4
15
3
10
2
5
1
9.5
10.0
10.5
11.0
11.5
12.0
12.5
13.0
13.5
Frequency (GHz)
Figure 4. Small Signal Gain and VSWR vs. Frequency at VDD = 8V.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
APGM0019
Figure 5. CR-15 Package Dimensions
The CR-15 is a high frequency, low thermal resistance package. The package consists of a
cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finish
consists of electrolytic gold over nickel plate.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
9.8-13.0 GHz 1.6 W Power Amplifier
MAAPGM0019
RO-P-DS-3073 B
Preliminary Information
Figure 6. Recommended Bias Configuration
VGG
0.1 µF
APGM0019
YWWLLLL
RFIN
RFOUT
VDD 3
0.1 µF
VDD 1/2
Pin Number
RF Designator
1
No Connection
2
VGG
3
RF IN
4
VGG
5
No Connection
6
VDD1/2
7
VDD3
8
RF OUT
9
VDD 3
10
VDD1/2
0.1 µF
Assembly Instructions:
This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board
which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically
conductive, ductile material should be used prior to installation of the CR-15 to improve the thermal and electrical performance of
the package to housing interface. Refer to M/A-COM Application Note #M567* for more information .
For applications where surface mount components are to be installed after the CR-15 installation, this package will not be
damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for
maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron
or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static
discharge (ESD) safe.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
* Application Notes can be found by going to the Site Search Page on M/A-COM’s web page
(http://www.macom.com/search/search.jsp) and searching for the required Application Note.
6
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages