NIC NRLFW332M63V22X20F Large can aluminum electrolytic capacitor Datasheet

Large Can Aluminum Electrolytic Capacitors
FEATURES
• LOW PROFILE (20mm HEIGHT)
• EXTENDED TEMPERATURE RATING +105°C
• LOW DISSIPATION FACTOR AND LOW ESR
• HIGH RIPPLE CURRENT
• WIDE CV SELECTION
• SUITABLE FOR SWITCHING POWER SUPPLIES
NRLFW Series
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Max. Leakage Current (µA)
After 5 minutes (20°C)
W.V. (Vdc)
Max. Tan δ
at 120Hz/20°C
Tan δ max.
W.V. (Vdc)
S.V. (Vdc)
Surge Voltage
W.V. (Vdc)
S.V. (Vdc)
Frequency (Hz)
Ripple Current
16 ~ 100Vdc
Multiplier at
Correction Factors
105°C
160 ~ 400Vdc
Temperature (°C)
Low Temperature
Capacitance Change
Stability (16 to 250Vdc)
Impedance Ratio
Capacitance Change
Load Life Test
Tan δ
2,000 hours at +105°C
Leakage Current
Capacitance Change
Shelf Life Test
1,000 hours at +105°C
Tan δ
(no load)
Leakage Current
Surge Voltage Test
Capacitance Change
Per JIS-C-5141 (table #6, #4)
Tan δ
Surge voltage applied: 30 seconds
Leakage Current
"On" and 5.5 minutes no voltage "Off"
Capacitance
Change
Soldering Effect
Refer to
Tan δ
MIL-STD-202F Method 210A
Leakage Current
-40 ~ +105°C
16 ~ 250Vdc
68 ~ 10,000µF
±20% (M)
3x
-25 ~ +105°C
400Vdc
33 ~ 100µF
C(µF)V
16
0.45
16
20
160
220
50
0.93
0.75
0
-5%
1.5
25
35
50
63
80
100 ~ 400
0.35 0.30 0.25 0.20 0.17
0.15
25
35
50
63
80
100
32
44
63
79
100
125
200
250 400 400
250
300 400 450
60
100 120 500
1K 10K ~ 50K
0.95 0.99 1.00 1.05 1.08
1.15
0.80 0.95 1.00 1.20 1.25
1.40
-25
-40
-10 -30% 3
9
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
MECHANICAL CHARACTERISTICS:
*NON-STANDARD VOLTAGES FOR THIS SERIES
1. Pressure Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure
is developed by circuit malfunction or mis-use like reverse voltage.
Insulation Sleeve
10.0
10.0 ± 0.1
pcb hole spacing
Max. 2.0
Terminal
(t=0.8)
Sleeve Color:
Dark Blue
Can Top Vent L ± 2.0 Max.
1.5
(∅D)
∅d ± 1.0
4.0
Minus Polarity Marking
6.3 ± 1.0
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds.
Top of Spin
6.3 ± 1.0
(4.0mm Leads Available As Option)
PRECAUTIONS
®
NIC COMPONENTS CORP.
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [email protected]
www.niccomp.com
www.lowESR.com
www.RFpassives.com
www.SMTmagnetics.com
165
Large Can Aluminum Electrolytic Capacitors
NRLFW Series
STANDARD PRODUCT LIST, CASE SIZE AND SPECIFICATIONS
W.V.
16
25
35
50
63
80
100
160
200
250
400
Cap
(µF)
Case
Size
3,300
4,700
6,800
10,000
2,200
3,300
4,700
6,800
1,500
2,200
3,300
4,700
1,000
1,500
2,200
3,300
680
1,000
1,500
2,200
470
680
1,000
1,500
330
470
680
1,000
150
220
330
470
100
150
220
330
68
100
150
220
33
47
68
100
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
30x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
22x20
25x20
30x20
35x20
ESR (Ω @ 20°C)
Max. Ripple Current
(Arms@85°C)
120Hz
20KHz
120Hz
10K ~ 50KHz
0.216
0.152
0.105
0.071
0.241
0.161
0.113
0.080
0.267
0.196
0.131
0.095
0.265
0.177
0.121
0.085
0.463
0.315
0.210
0.143
0.459
0.317
0.216
0.155
0.653
0.459
0.317
0.216
1.437
0.098
0.553
0.459
1.989
1.326
0.904
0.603
2.926
1.989
1.326
0.904
5.024
3.527
2.438
1.658
0.173
0.121
0.084
0.057
0.181
0.121
0.085
0.060
0.216
0.140
0.098
0.071
0.199
0.133
0.089
0.064
0.347
0.236
0.157
0.107
0.298
0.206
0.140
0.108
0.392
0.275
0.190
0.129
0.647
0.441
0.249
0.208
0.895
0.597
0.407
0.271
1.463
0.995
0.663
0.452
1.758
1.235
0.853
0.580
1.30
1.60
1.80
2.40
1.30
1.60
1.80
2.30
1.10
1.40
1.70
2.00
0.90
1.20
1.40
1.70
0.90
1.20
1.30
1.50
0.80
1.00
1.20
1.40
0.80
1.00
1.10
1.20
0.55
0.75
1.00
1.15
0.50
0.65
0.87
1.10
0.40
0.50
0.65
0.87
0.20
0.25
0.35
0.47
1.50
1.84
2.078
2.76
1.50
1.84
2.07
2.65
1.27
1.61
1.96
2.30
1.04
1.38
1.61
1.96
1.04
1.38
1.50
1.70
0.92
1.15
1.38
1.61
1.20
1.50
1.65
1.80
0.77
1.05
1.40
1.61
0.70
0.91
1.22
1.54
0.56
0.70
0.91
1.22
0.28
0.35
0.49
0.66
PART NUMBER SYSTEM
NRLFW 102 M 50V 22X20 F
RoHS compliant
Case Size (mm)
Voltage Rating
Tolerance Code
Capacitance Code
Series
®
166
NIC COMPONENTS CORP.
www.niccomp.com
www.lowESR.com
www.RFpassives.com
www.SMTmagnetics.com
Similar pages