CD 29H QH Series 5 000 h at 105°C CD 299 PG CD 29H QH · Long Useful Life · Highest Ripple Current · Miniaturized · Industrial Power Supplies and Inverters longest life higher current highest current CD 294 BW longer life CD 296 KC longer life CD 297 BB 105°C CD 293 BZ Item Characteristics Operating Temperature Range (°C) -40 ~ +105 Voltage Range (V) 160 ~ 450 Capacitance Range (µF) 47 ~ 2 200 Capacitance Tolerance (20°C, 120Hz) ± 20% Leakage Current (µA) After 5 minutes at 20°C application of rated voltage, leakage current is not more than 0,01CV or 1,5mA, whichever is smaller C: Nominal Capacitance (µF) V: Rated Voltage (V) Rated Voltage (V) Dissipation Factor (20°C, 120Hz) 200 Tan δ (max) 250 350 450 0,12 160 ~ 450 4 Z -40°C / Z +20°C Useful Life 5 000h Lifetime 400 0,15 Rated Voltage (V) Stability at Low Temperature (Impedance Ratio at 120Hz) Snap-In 160 Load Life >100 000h Endurance Test 3 000h Shelf Life 3 000h 1 000h Leakage Current Not more than specified value Not more than specified Not more than specified value value Not more than specified value Capacity Change Within ± 30% of initial value Within ± 20% of initial value Within ± 20% of initial value Within ± 20% of initial value Not more than 300% of specified value Not more than 200% of specified value Not more than 130% of specified value Not more than 200% of specified value UR UR UR UR UR = 0 IR 1,4 x IR IR IR = 0 IR = 0 105°C 50°C 105°C 105°C 105°C ≤ 1% Failure Rate ≤ 1% Failure Rate guaranteed Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient Lifetime Diagram 3.0 Frequency 50Hz 120Hz 1kHz 10kHz 100kHz Coefficient 0,87 1,00 1,15 1,35 1,40 CD 29H QH Series IA ––– 2.5 IR 2.0 1.5 1.0 X32 0.5 0.0 40 X16 X8 X4 X2 X1 Lifetime Multiplier 50 60 70 80 90 100 110 TA (˚C) IA = actual ripple current at 120Hz, IR = rated ripple current at 120Hz, 105°C Multiplier of Useful Life as a function of ambient temperature and ripple current load 62 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 CD 29H QH Series Ratings for CD 29H QH Series Rated Capacitance Max ESR 20°C, 120Hz Typ ESR 20°C, 120Hz Max Ripple Current 105°C, 120Hz (V) (µF) (mΩ) (mΩ) (Arms) 603 511 424 356 356 356 293 293 243 243 243 243 199 199 199 166 166 166 133 133 111 91 905 737 603 603 511 424 424 424 356 356 293 293 293 293 243 243 243 199 199 166 166 133 111 91 1 106 905 905 737 603 603 603 511 511 424 424 424 356 356 356 293 293 243 243 199 199 166 133 355 306 245 210 210 210 175 175 145 145 145 145 119 119 119 99 99 99 79 79 73 58 550 460 370 370 310 260 260 260 220 220 180 180 180 180 150 150 150 120 120 100 100 80 68 56 620 570 570 470 380 380 380 325 325 268 268 268 225 225 225 185 185 153 153 125 125 105 85 1,50 1,60 1,80 2,10 2,20 2,10 2,60 2,50 2,80 2,70 2,90 2,80 3,30 3,40 3,30 3,70 3,80 3,60 4,40 4,30 4,40 5,90 1,10 1,17 1,40 1,40 1,45 1,55 1,55 1,60 1,65 1,65 1,68 1,92 1,92 2,20 2,20 2,20 2,40 2,40 2,40 2,75 2,75 3,45 4,00 4,50 1,00 1,20 1,20 1,25 1,30 1,35 1,35 1,40 1,45 1,65 1,65 1,65 1,85 1,85 1,85 2,20 2,20 2,50 2,50 2,90 2,90 3,30 3,80 330 390 470 560 680 160 (200) 2C 820 1 000 1 200 1 500 1 800 2 200 220 270 330 390 470 560 200 (250) 2D 680 820 1 000 1 200 1 500 1 800 2 200 180 220 270 330 390 250 (300) 2E 470 560 680 820 1 000 1 200 1 500 Size Ø DxL VDC (Surge Voltage) Code Rated Capacitance Max ESR 20°C, 120Hz Typ ESR 20°C, 120Hz Max Ripple Current 105°C, 120Hz (mm) (V) (µF) (mΩ) (mΩ) (Arms) 2 926 1 990 1 990 1 658 1 327 1 327 1 327 1 106 1 106 1 106 905 905 905 737 737 737 603 603 511 511 424 356 3 387 2 341 1 941 1 941 1 592 1 592 1 327 1 327 1 327 1 062 1 062 1 062 885 885 885 885 724 724 724 590 590 590 483 483 409 409 339 285 2 843 2 341 1 941 1 592 1 592 1 592 1 327 1 327 1 062 1 062 1 062 1 062 885 885 724 724 724 590 590 483 483 409 339 1 280 1 060 1 060 880 700 700 700 580 580 580 480 480 480 390 390 390 320 320 270 270 225 190 1 835 1 260 1 050 1 050 860 860 718 718 718 575 575 575 479 479 479 479 292 292 292 319 319 319 260 260 220 220 183 154 1 360 1 170 970 790 790 790 660 660 530 530 530 530 440 440 360 360 360 295 295 240 240 205 170 0,70 0,87 0,87 0,90 0,98 1,02 1,02 1,11 1,11 1,12 1,16 1,20 1,20 1,26 1,31 1,26 1,45 1,45 1,58 1,58 1,69 1,89 0,40 0,48 0,57 0,56 0,65 0,65 0,71 0,71 0,71 0,85 0,85 0,85 1,00 1,00 1,00 1,00 1,20 1,20 1,20 1,35 1,35 1,35 1,60 1,60 1,80 1,80 2,10 2,30 0,50 0,60 0,65 0,72 0,72 0,72 0,80 0,80 0,95 0,95 0,95 0,95 1,05 1,05 1,30 1,30 1,30 1,50 1,50 1,90 1,90 1,90 2,20 22 x 25 25 x 25 22 x 35 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 35 30 x 45 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 30 22 x 35 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 30 x 40 35 x 35 30 x 45 35 x 40 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 30 x 45 30 x 50 30 x 50 35 x 40 35 x 45 35 x 50 68 100 120 150 180 350 (400) 2V 220 270 330 390 470 560 47 68 82 100 120 150 400 (450) 2G 180 220 270 330 390 470 560 56 68 82 100 120 450 (500) 2W 150 180 220 270 330 390 470 Size Ø DxL (mm) 22 x 25 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 45 25 x 35 30 x 30 22 x 50 25 x 40 35 x 25 25 x 50 30 x 35 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 25 22 x 35 25 x 30 30 x 25 22 x 40 25 x 35 30 x 25 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 35 x 30 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 22 x 25 22 x 30 22 x 35 22 x 35 25 x 30 30 x 25 22 x 45 25 x 35 22 x 50 25 x 40 30 x 30 35 x 25 25 x 45 30 x 35 25 x 50 30 x 40 35 x 30 30 x 45 35 x 35 30 x 50 35 x 40 35 x 45 35 x 50 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 63 Snap-In VDC (Surge Voltage) Code Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial =R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance 0,47 = R47 ±20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 5x11,5 = 0511 CD VS = BS CD VH = VH 1,0 = 010 =K Taped CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 ±10% +50 / -10% = T = FF Terminal = T2 6,3x11,5 = 0611 CD 262 = QM 10 000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90° - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions Ø DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Technical Specification Snap-In Type Pin Type: Snap-In Order Code: T6, T4 Pin Type: Soldering Order Code: S4 T6, T4 S4 Terminal T6 T4 Pin Length T 6,3 4,0 Snap-In Terminal Order Code: P2, P3, P4 Soldering Terminal Order Code: P5 P2 P3 P4 P5 Positive Negative Terminal Negative Negative Mounting Holes Mounting Holes Mounting Holes P3 only T4 Terminal Order Code Screw Type EC G Technology Terminal Type 1C BP Rated Voltage Series Code Code 101 M Capacitance Code Capacitance Tolerance CD 135 = BP 100 = 101 EC = Electrolytic Screw = G For coding Capacitor please refer CD 136 = PK 1 000 = 102 to the pages CD 137 = PX 10 000 = 103 of ratings CD 138 = PC CD 139 = BL B E Mounting 160 A361 JExxxxx For Terminal Code see tables below for Specials only Diameter Length ±20% = M Bolt =B 36 = A 53 = 053 ±10% = K No double sleeve =N 40 = B 65 = 065 +30 / -10% = Q 2 stoppers bracket+double sleeve* = I 51 = C 96 = 096 +20 / -0% = R 3 stoppers bracket+double sleeve* = Y 64 = D 100 = 100 +50 / -10% = T No bracket, but double sleeve* 77 = E 115 = 115 preferred =D * Double sleeve for diameter ≥ 51 only 90 = F 236 = 236 101 = G Technical Specification Screw Type Dimensions Standard Housing Order Code: I, Y, D, N Bolt Housing Order Code: B ØD Ød l Ø 36 M8 12 ≥ Ø 51 M12 16 in mm 10 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2