Panasonic ET-PKL100S Ceiling mount bracket for low ceiling Datasheet

ET-PKL100S
Ceiling mount bracket for low ceilings
Description
This ceiling mount bracket is to be used when mounting projectors to low ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight:
Applicable bracket assembly:
+5°, -15°
±10°*1
±5°
160 × 76 × 150 mm (6-5/16× 3 × 5-29/32 inches)
0.7 kg*2 (1.5 lbs)*2
ET-PKL420B/PKL430B/PKV400B
* 1 Correction angle when using together with the PKL420B/PKL430B/PKV400B.
* 2 Average value. May differ depending on models.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hex head bolt,captive washer(M6 × 12) . . . . . . . . 4
Caution:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed Installation instructions thoroughly before starting. The instructions for installing the dropprevention wire are given in the Installation Instructions for the base mount bracket.
• Do not use an electric screwdriver or impact driver to tighten screws.
Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
25
(31/32)
132
(5-3/16)
4-ø
1
(ø7 1.5
/16
)
76
(3)
142
(5-19/32)
160
(6-5/16)
150
(5-29/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of May 2014
SFL14A013
1/3
ET-PKL100S
Ceiling mount bracket for low ceilings
Dimensions
177
(6-31/32)
105.5
(4-5/32)
66
(2-19/32)
25
(31/32) 71
(2-25/32)
158
(6-7/32)
146.5
(5-25/32)
142
(5-19/32)
78
(3-1/16)
35.3
(1-3/8)
149
(5-7/8)
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL420B and the PT-LW330/LW280/LB360/LB330/LB300/LB280 is attached.
132
(5-3/16)
78
(3-1/16)
177
(6-31/32)
142.5
(5-5/8)
66
(2-19/32)
25
(31/32) 71
(2-25/32)
158
(6-7/32)
186.5
(7-11/32)
142
(5-19/32)
70.7
(2-25/32)
152
(5-31/32)
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKL430B and the PT-TW341R/TW340/TW250/TX400/TX310/TX210 is attached.
132
(5-3/16)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of May 2014
SFL14A013
2/3
ET-PKL100S
Ceiling mount bracket for low ceilings
Dimensions
193.6
(7-5/8)
179.0
(7-1/16)
66(2-19/32)
25
(31/32)
71
195.4
(7-11/16)
153.0
(6-1/32)
(2-25/32)
142
(5-19/32)
89.6
(3-17/32)
52.8
(2-3/32)
166.7
(6-9/16)
The illustration shows the ceiling mount bracket when it is combined
with the ET-PKV400B and the PT-VZ575N/VZ570/VW535N/VW530/VX605N/VX600 is attached.
132
(5-3/16)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of May 2014
SFL14A013
3/3
Similar pages