MSA-0711 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet Description Features The MSA-0711 is a low cost silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in the surface mount plastic SOT‑143 package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial and industrial applications. • Cascadable 50 Ω Gain Block The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. SOT-143 Package • 3 dB Bandwidth: DC to 1.9 GHz • 12.0 dB Typical Gain at 1.0 GHz • Unconditionally Stable (k>1) • Low Cost Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available • Lead-free Option Available Typical Biasing Configuration R bias VCC > 5 V RFC (Optional) C block Pin Connections and Package Marking A07x Notes: Top View. Package Marking provides orientation and identification. "x" is the date code. IN C block OUT MSA Vd = 3.8 V MSA-0711 Absolute Maximum Ratings Thermal Resistance[2]: θjc = 505°C/W Absolute Maximum[1] 50 mA Parameter Device Current Power Dissipation[2,3] 175 mW RF Input Power +13 dBm Junction Temperature 150°C Storage Temperature –65 to 150°C Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TCASE = 25°C. 3. Derate at 2.0 mW/°C for TC > 62°C. Electrical Specifications[1], TA = 25°C Symbol Parameters and Test Conditions: Id = 22 mA, ZO = 50 Ω GP Power Gain (|S21| 2) f = 0.1 GHz f = 1.0 GHz ∆GP Gain Flatness f = 0.1 to 1.3 GHz f3 dB 3 dB Bandwidth VSWR Units Min. Typ. 10.0 13.0 12.0 dB dB ±0.8 GHz 3.2 Input VSWR f = 0.1 to 2.0 GHz 1.5:1 Output VSWR f = 0.1 to 2.0 GHz 1.5:1 NF 50 Ω Noise Figure f = 1.0 GHz dB 5.0 P1 dB Output Power at 1 dB Gain Compression f = 1.0 GHz dBm 5.5 IP3 Third Order Intercept Point f = 1.0 GHz dBm 18.0 tD Group Delay f = 1.0 GHz psec 145 Vd Device Voltage TC = 25°C dV/dT Device Voltage Temperature Coefficient V mV/°C 3.0 3.8 Max. 4.6 –7.0 Note: 1. The recommended operating current range for this device is 15 to 30 mA. Typical performance as a function of current is on the following page. Ordering Information Part Numbers No. of Devices Comments MSA-0711-BLK 100 Bulk MSA-0711-BLKG 100 Bulk MSA-0711-TR1 3000 7" Reel MSA-0711-TR1G 3000 7" Reel MSA-0711-TR2 10000 13" Reel MSA-0711-TR2G 10000 13" Reel Note: Order part number with a “G” suffix if lead-free option is desired. MSA-0711 Typical Scattering Parameters (ZO = 50 Ω, TA = 25°C, Id = 22 mA) S11 S21 Freq. GHz Mag Ang 0.1 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 .03 .04 .04 .05 .07 .08 .13 .18 .25 .32 .38 .42 1 1 –4 –19 –32 –44 –88 –130 –155 –178 165 152 S12 S22 dB Mag Ang dB Mag Ang Mag Ang 13.0 12.9 12.8 12.6 12.3 12.0 10.9 9.8 8.6 7.2 5.8 4.5 4.47 4.42 4.38 4.28 4.14 3.99 3.52 3.08 2.68 2.30 1.96 1.68 174 168 157 146 135 123 98 75 61 42 26 12 –18.6 –18.5 –18.4 –18.1 –17.7 –17.4 –16.1 –15.2 –14.7 –14.7 –14.8 –14.7 .118 .119 .120 .125 .130 .135 .157 .173 .184 .185 .181 .184 1 2 4 9 10 12 13 8 9 5 3 1 .19 .19 .19 .19 .20 .19 .19 .18 .18 .17 .17 .20 –8 –18 –36 –52 –68 –82 –113 –138 –151 –158 –150 –142 Typical Performance, TA = 25°C (unless otherwise noted) 14 Gain Flat to DC G p (dB) G p (dB) 12 8 6 2 0.1 0.3 0.5 1.0 3.0 6.0 Figure 1. Power Gain vs. Frequency, Id = 22 mA. 6.5 6.0 NF (dB) 5 4 3 6 FREQUENCY (GHz) 5.5 5.0 0.2 0.3 0.5 1.0 FREQUENCY (GHz) Figure 4. Noise Figure vs. Frequency, Id = 22 mA. 2.0 GHz 10 8 4 4.5 0.1 6 1.0 GHz 10 0 0.1 GHz 14 P1 dB (dBm) 12 7 16 2.0 4 10 20 30 I d (mA) 40 Figure 2. Power Gain vs. Current. 2 0.1 0.2 0.3 0.5 1.0 2.0 FREQUENCY (GHz) Figure 3. Output Power at 1 dB Gain Compression vs. Frequency, Id = 22 mA. SOT-143 Package Dimensions e2 e1 RF OUTPUT AND BIAS GROUND B1 XXX E E1 L GROUND B RF INPUT e C DIMENSIONS (mm) D A A1 Notes: XXX-package marking Drawings are not to scale SYMBOL A A1 B B1 C D E1 e e1 e2 E L MIN. 0.79 0.013 0.36 0.76 0.086 2.80 1.20 0.89 1.78 0.45 2.10 0.45 For product information and a complete list of distributors, please go to our web site: MAX. 1.097 0.10 0.54 0.92 0.152 3.06 1.40 1.02 2.04 0.60 2.65 0.69 www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-4454EN AV02-0790EN - October 31, 2007