EMRS-6X1 V3 E-Series Surface Mount Mixer 925 – 960 MHz, 1805 – 1880 MHz & 1930 – 1990 MHz Features SM - 1 Package LO Power +7 dBm Up to +7 dBm RF Low Profile Surface Mount Tape and reel packaging available 0.319 [8.11] 0.187 [4.75]MAX 0.025 [.64] 0.250 [6.35] • • • • • Description M/A-COM’s EMRS-6X1 is a Low Cost, Broadband, high performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. EMRS-6X1 is available in an SM-1 surface mount package and reflows using standard soldering reflow profiles. Parts are packaged in tape & reel. 0.260 0.250 [6.60] [6.35] 0.160 [4.06] 0.070 [1.78] 0.270 [6.87] 0.060 [1.52] 0.050 [1.27] 0.040 0.050 [1.02] [1.27] 0.100 [2.54] Electrical Specifications: TA = 25°C, Z0 = 50Ω 1, LO = +7 dBm Parameter Test Conditions Frequency Units Min Typ Max RF Frequency (1) — 925 - 960 MHz — — — LO Frequency (1) — 45 MHz — — — IF Frequency (1) — 820 - 915 MHz — — — RF Frequency (2) — 1805 - 1880 MHz — — — LO Frequency (2) — 95 MHz — — — IF Frequency (2) — 1710 - 1785 MHz — — — RF Frequency (3) — 1930 - 1990 MHz — — — LO Frequency (3) — 80 MHz — — — IF Frequency (3) — 1850 - 1910 MHz — — — Ordering Information Part Number Package EMRS-6X1TR Tape and Reel (900 piece Reel) 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. EMRS-6X1 V3 E-Series Surface Mount Mixer 925 – 960 MHz, 1805 – 1880 MHz & 1930 – 1990 MHz Electrical Specifications: TA = 25°C, Z0 = 50Ω 1, LO = +7 dBm Parameter Test Conditions Frequency Units Min Typ Max Conversion Loss — 925 - 960 1805 - 1880 1930 - 1990 dB dB dB 6.5 8.5 8.5 7.0 9.5 10.0 9.0 11.0 11.0 Isolation LO to RF 45, 80, & 95 MHz dB 25 35 55 Isolation LO to IF 45, 80, & 95 MHz dB 25 30 40 Input 1 dB Compression — 5 - 2500 dBm — — 7 RF VSWR — — Ratio 1.3:1 2.4:1 3.0:1 LO VSWR — — Ratio 1.4:1 1.6:1 1.8:1 IF VSWR — — Ratio 1.1:1 1.4:1 1.8:1 Absolute Maximum Ratings 1 Pin Configuration Pin No. Function Parameter Absolute Maximum 1 LO I/P RF Power 50 mW 2 Ground Peak IF Current 40 mA 3 Ground Operating Temperature -55°C to +100°C 4 RF O/P Storage Temperature -55°C to +125°C 5 IF I/P Pin Temperature (10 seconds) +260°C 6 Ground 1. Operation of this device above any one of these parameters may cause permanent damage. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.