PRODUCT DATASHEET ANGELA series last update 3/11/2016 DETAILS Product Number FCN14690_ANGELA-XW Family ANGELA Type RefPack Color white Diameter 119,5 mm Height mm Style round Optic Material Holder Material Fastening Status production ready ROHS Comliant Yes Date Updated 3/11/2016 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO13 73 deg Wide 93 % 0.630 - VERO18 72 deg Wide 93 % 0.630 - V10 Gen7 sim: 72 Wide sim: 86 % sim: 0.580 Bender Wirth: 434 Typ L1 CLL03x/CLU03x 72 deg Wide 93 % 0.630 Bender Wirth: 433 Typ L1 CLU700/701 73 deg Wide 93 % 0.640 Bender Wirth: 434 Typ L1 CLL02x/CLU02x (LES10) 72 deg Wide 93 % 0.640 Bender Wirth: 434 Typ L1 CLU720/721 72 deg Wide 93 % 0.640 Bender Wirth: 433 Typ L1 CXA/B 1816 & CXA/B 1820 & CXA 1850 72 deg Wide 92 % 0.630 Bender Wirth: 437 Typ L1 CXA/B 15xx 73 deg Wide 93 % 0.630 Bender Wirth: 441 Typ L1 LUXEON CoB 1202/1203 73 deg Wide 93 % 0.600 Bender Wirth: 438 Typ L1 CXM-14 sim: 72 Wide sim: 93 % sim: 0.630 Bender Wirth: 433 Typ L1 CXM-9 sim: 72 Wide sim: 93 % sim: 0.640 Bender Wirth: 434 Typ L1 COB L-Type (LES 9) 73 deg Wide 94 % 0.620 Bender Wirth: 438 Typ L1 COB J-Type 72 deg Wide 93 % 0.630 Bender Wirth: 463 Typ L2 COB L-Type (LES 11) 73 deg Wide 93 % 0.630 Bender Wirth: 438 Typ L1 Soleriq P9 73 deg Wide 94 % 0.610 Bender Wirth: 461 Typ L1 Soleriq P13 72 deg Wide 94 % 0.620 Bender Wirth: 437 Typ L1 Soleriq S13 72 deg Wide 93 % 0.640 Bender Wirth: 437 Typ L1 LC026B/LC040B 72 deg Wide 92 % 0.630 Bender Wirth: 450 Typ L2 ZC12/18 sim: 72 Wide sim: 93 % sim: 0.630 Bender Wirth: 433 Typ L1 ZC4/6 sim: 72 Wide sim: 93 % sim: 0.640 Bender Wirth: 434 Typ L1 SLE G5 LES11 73 deg Wide 92 % 0.630 Bender Wirth: 434 Typ L1 May 23rd 2017 5:54 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H A 4 4 5 49.8 1 . 19 3 35 3 2 2 DIMESION A WITH LEDIL LUXEON S SOCKETS 80.5 mm WITH TYCO SOCKET 80.5 mm WITH LEDIL BRIDGELUX VERO SOCKETS 79.5 mm Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE DATA SHEET ANGELA SIZE A3 SCALE H G 1 PART NUMBER 1:1 WEIGHT - B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.