DM9162 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver 1. Features ● ● Provide Loopback mode for easy system diagnostics ● LED status outputs indicate Link/ Activity, Speed10/100 and Full-duplex/Collision. Support Dual-LED optional control ● Support HP MDI/MDI-X auto crossover function (HP Auto-MDIX) ● Support Auto-Negotiation function, compliant with IEEE 802.3u ● Fully integrated Physical layer transceiver On-chip filtering with direct interface to magnetic transformer Single low power Supply of 3.3V with an advanced CMOS technology ● Lower Power consumption modes: ● ● Selectable repeater or node mode ● Selectable MII or RMII (Reduced MII) mode for 100Base-TX and 10Base-TX. Selectable MII or GPSI (7-Wired) mode for 10Base-T ● RMII with 50MHz clock output ● Selectable full-duplex or half-duplex operation ● 2. Fully complies with IEEE 802.3 / IEEE 802.3u 10Base-T/ 100Base-TX, ANSI X3T12 TP-PMD 1995 standards MII management interface with mask-able interrupt output capability o Power Reduced mode (cable detection) o Power Down mode ● Compatible with 3.3V and 5.0V tolerant I/Os ● Pin to pin Compatible with DM9161A/B/C ● DSP architecture PHY Transceiver. ● 7x7mm 48-pin LQFP/ 5x5mm 32-pin QFN - 0.162um process General Description DAVICOM’s DM9162 is a physical layer, low power, and single-chip 10BASE-T/100BASE-TX transceiver specifically designed for consumer electronics, industrial, and enterprise applications. Through using a CMOS process, the DM9162 has the advantage of ensuring both high performance and savings in power consumption. Through utilization of automatic media speed and protocol selection, the auto-negotiation function is strongly supported in the DM9162. Then due to the built-in wave shaping filter, the DM9162 has a significant convenience of not requiring an external filter to transport signals to the media in 10BASE-T or 100BASE-TX during Ethernet operation. Through its Media Independent Interface (MII), Preliminary Version: 1.1 2011/12/29 the DM9162 not only connects the Medium Access Control (MAC) layer, but the MII also ensure a high inter-operability and flexibility with different vendors. In media usage applications, the DM9162 provides a direct interface either to an Unshielded Twisted Pair Category 5 Cable (UTP5) for 100BASE-TX Fast Ethernet, or an UTP5/UTP3 Cable for 10BASE-T Ethernet. The DM9162 contains the entire physical layer functions of 100BASE-TX. Those physical layer functions are defined by IEEE802.3u include the Physical Coding Sub layer (PCS), Physical Medium Attachment (PMA), Twisted Pair Physical Medium Dependent Sub layer (TP-PMD), 10BASE-TX Encoder/Decoder (ENC/DEC), and Twisted Pair Media Access Unit (TPMAU). 1 DM9162 10/100 Mbps Fast Ethernet Physical Layer Single Chip Transceiver 3. Applications ● ● ● ● ● ● ● IP STB Router IPC Internet Radio 4. Block Diagram 5. Order Information Part Number DM9162NP DM9162EP Pin Count 32 48 IP CAM DVR VoIP CPE (ATA, IP Phone, Video Phone) Package QFN LQFP DAVICOM Semiconductor, Inc. No.6, Li-Hsin Rd.VI, Science Park, Hsin-Chu, Taiwan, R.O.C. TEL: 886-3-5798797 FAX: 886-3-5646929 E-mail: [email protected] Preliminary Version: 1.1 2011/12/29 2