Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer General Description Features The AZ4052 is high-speed si-gate CMOS device. The AZ4052 is dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW • • ___ Wide Operation Voltage: ±5.0V or 10V Low On-resistance: - 55Ω (Typ.) at VCC-VEE=5V - 40Ω ( Typ.) at VCC-VEE=10V Ultra Low THD+N: 0.003% @ 10V, 0.008% @ 5.0V Ultra Low Crosstalk: -120dB Ultra Low Noise: 6.0μVRMS Operating Temperature: -40ºC to 85ºC • • • • ___ enable input (pin E ). When pin E =LOW, one of the four switches is selected (Low-impedance On-state) AZ4052 ___ with pins S0 and S1. When pin E =HIGH, all switches are in the high-impedance Off-state, independent of pins S0 and S1. VCC and GND are the supply voltage pins for the digital control inputs (pins Applications • • ___ S0, S1 and E ). The VCC to GND ranges are 3.0V to 10V. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC-VEE may not exceed 10V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (Typically Ground). LCD TV/PDP TV/CRT TV 4:1 Multi-channel Signal Selecting Function Table Control Input ___ The AZ4052 is available in standard packages of SOIC-16 and DIP-16. E L L L L H S1 L L H H X SOIC-16 On Channel S0 L H L H X nY0 nY1 nY2 nY3 nZ nZ nZ nZ None DIP-16 Figure 1. Package Types of AZ4052 Oct. 2011 Rev. 1.1 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Pin Configuration M Package P Package (SOIC-16) (DIP-16) 2Y0 1 16 VCC 2Y2 2 15 1Y2 2Z 3 14 1Y1 2Y3 4 13 1Z 2Y1 5 12 1Y0 E 6 11 1Y3 VEE 7 10 S0 GND 8 9 S1 Figure 2. Pin Configuration of AZ4052 (Top View) Pin Descriptions Pin Number Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2Y0 2Y2 2Z 2Y3 2Y1 Oct. 2011 E VEE GND S1 S0 1Y3 1Y0 1Z 1Y1 1Y2 VCC Function 2CH signal input or output terminal 0 2CH signal input or output terminal 2 2CH common signal input or output terminal 2CH signal input or output terminal 3 2CH signal input or output terminal 1 Enable input (Active LOW) Negative supply voltage Ground (0V) Select logic input terminal 1 Select logic input terminal 0 1CH signal input or output terminal 3 1CH signal input or output terminal 0 1CH common signal input or output terminal 1CH signal input or output terminal 1 1CH signal input or output terminal 2 Positive supply voltage Rev. 1. 1 BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Functional Block Diagram Figure 3. Functional Block Diagram of AZ4052 Schematic Diagram (One Switch) Figure 4. Schematic Diagram of AZ4052 Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Ordering Information AZ4052 Circuit Type G1: Green Package M: SOIC-16 P: DIP-16 TR: Tape & Reel Blank: Tube Package Temperature Range SOIC-16 -40 to 85°C DIP-16 - -40 to 85°C Part Number Marking ID Packing Type AZ4052M-G1 AZ4052M-G1 Tube AZ4052MTR-G1 AZ4052M-G1 Tape & Reel AZ4052P-G1 AZ4052P-G1 Tube BCD Semiconductor's Pb-free products, as designated with "G1" suffix in the part number, are RoHS compliant and Green. Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Absolute Maximum Ratings (Note 1, 2) Parameter Symbol Value Unit -0.5 to 11.0 V 20 mA 20 mA 25 mA 20 mA 50 mA 500 mW TSTG -65 to 150 ºC TJ 150 ºC PS 100 mW ESD (Machine Model) 200 V ESD (Human Body Model) 2000 V Power Supply Voltage VCC Input Diode Current IIK Switch Diode Current ISK Switch Current IS VEE Current VCC Current GND Current IEE ICC IGND Power Dissipation Storage Temperature Range Operating Junction Temperature Range Power Dissipation Per Switch PD Condition VI<-0.5V, VI>VCC+0.5V VS<-0.5V, VS>VCC+0.5V -0.5V<VS<VCC+0.5V TA=-40ºC to 85ºC (Note 3) Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. Note 2: To avoid drawing VCC current out of pins nZ, when switch current flows in pins nYn, the voltage drop across the bidirectional switch must not exceed 0.4V. If the switch current flows into pins nZ, no VCC current will flow out of pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nYn and nZ may not exceed VCC or VEE. Note 3: Above 70ºC derate linearly with 12mW/K (DIP-16 package). Above 70ºC derate linearly with 8mW/K (SOIC-16 package) Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Recommended Operating Conditions Parameter Symbol Condition Min Typ Max VCC-GND 3.0 10 VCC-VEE 3.0 10 Unit V Supply Voltage VIN Logic Input Voltage Switch Signal Input/ Output Voltage Operating Ambient Temperature Range VI VEE VCC V VIS/VOS VEE VCC V TA -40 85 ºC Input Rise and Fall Time t r, t f VCC=5.0V 6.0 400 VCC=10V 6.0 250 ns Electrical Characteristics DC Characteristics VIS is the input voltage at pins nYn or nZ, whichever is assigned as an input; VOS is the output voltage at pins nZ or nYn, whichever is assigned as an output, voltages are referenced to GND (Ground=0V). Parameter Symbol High-level Input Voltage VIH Low-level Input Voltage VIL Input Leakage Current ILI Analog Switch Off-state Current Analog Switch On-state Current Quiescent Supply Current Oct. 2011 IS (Off) IS (On) ICC Other Conditions VCC(V) VI=VCC or GND VEE(V) Min 5.0 2.8 10 6.0 Typ Max Unit V 5.0 1.5 10 3.0 V 5.0 0 ±1.0 μA 10 0 ±1.0 μA ±1.0 μA VI=VIH or VIL, ︱VS︱=VCC-VEE (Figure 5) 5.0 Per Channel 10 0 ±1.0 μA All Channels 10 0 ±2.0 μA 10 0 ±2.0 μA 5.0 0 50 160 μA 10 0 100 320 μA VI=VIH or VIL, ︱VS︱=VCC-VEE (Figure 6) VI=VCC or GND, VIS=VEE or VCC, VOS=VCC or VEE Rev. 1. 1 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Electrical Characteristics (Continued) Resistance RON VIS is the input voltage at pins nYn or nZ, which is assigned as an input ((note 4) see figure 7) Conditions Parameter Symbol Other On-resistance (Peak) RON (Peak) VIS=VCC to VEE, VI =VIH or VIL VIS=VEE, VI =VIH or VIL On-resistance (Rail) Max Unit 1000 73 180 Ω 0 1000 47 120 Ω 5.0 0 1000 55 130 Ω 10 0 1000 40 100 Ω 5.0 0 1000 61 150 Ω 10 0 1000 45 110 Ω 5.0 0 5 Ω 10 0 6 Ω VEE (V) IS (μA) 5.0 0 10 Min RON (Rail) VIS=VCC, VI=VIH or VIL Maximum On-resistance Difference Between Any Two Channels Typ VCC (V) RON VIS=VCC to VEE, VI=VIH or VIL Note 4: When supply voltages (VCC-VEE) near 2.0V the analog switch On-resistance becomes extremely non-linear. When using a supply of 2V, it is recommended to use these devices only for transmitting digital signals. Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Electrical Characteristics (Continued) AC Characteristics GND=0V, tr=tf=6ns, CL=50pF Parameter Symbol Propagation Delay VIS to VOS tPHL/tPLH Turn-on Time tPZH/tPZL ___ E , Sn to VOS Turn-off Time tPHZ/tPLZ ___ E , Sn to VOS Conditions VCC (V) Other Min VEE (V) Typ Max Unit RL=∞ (Figure 24) 5.0 0 15 25 ns 5.0 -5.0 12 25 ns RL=1kΩ (Figure 25 and 26) RL=1kΩ (Figure 25 and 26) 5.0 0 38 81 ns 5.0 -5.0 26 81 ns 5.0 0 27 63 ns 5.0 -5.0 22 48 ns Recommended conditions and typical values, GND=0V, TA=25ºC, CL =50pF. VIS is the input voltage at pins nYn or nZ, whichever is assigned as an input. VOS is the output voltage at pins nYn or nZ, whichever is assigned as an output. Conditions Parameter Symbol Sine-wave Distortion dSIN Switch OFF Signal Feed-through Crosstalk Between Two Channels Crosstalk Between Two Switches /Multiplexers Crosstalk Voltage Between Control and Any Switch (Peak-to-peak Value) αOFF (Feedthrough) Frequency Response (-3dB) Output Noise Voltage Oct. 2011 αCT(S) Min Typ Max Unit VIS(p-p) (V) VCC (V) VEE (V) f =1kHz, RL=10kΩ (Figure 8) 0.5 5.0 0 0.008 % 1.5 10 0 0.003 % f=10kHz, RL=10kΩ (Figure 8) 0.5 5.0 0 0.008 % 1.5 10 0 0.003 % RL=10kΩ, f=1MHz (Figure 9), VIS=1VRMS RL=10kΩ, f=1kHz (Figure 10), VIS=1VRMS 5.0 0 -50 dB 5.0 -5.0 -50 dB 5.0 0 -120 dB 5.0 -5.0 -120 dB RL =10kΩ, f=1kHz (Figure 10), VIS=1VRMS 5.0 0 -60 dB 5.0 -5.0 -60 dB 5.0 0 110 mV RL=10kΩ (Figure 8) 5.0 0 70 MHz 5.0 -5.0 70 MHz A-weighted 5.0 0 6.0 μVRMS Other RL =10kΩ, ___ VCT(P-P) fMAX VNOISE f=1MHz, E or Sn, Square-wave Between VCC and GND, tr= tf=6ns (Figure 11) Rev. 1. 1 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Test Circuit LOW (From Select Input) HIGH (From Select Input) nYn nZ A nYn A VI=VCC or VEE nZ A VO=VEE or VCC VIS=VEE or VCC VOS (Open Circuit) VEE VEE Figure 5. Test Circuit for Measuring OFF-state Current HIGH (From Select Input) Figure 6. Test Circuit for Measuring ON-state Current V nYn VIS=0 to VCC-VEE nZ IIS VEE Figure 8. Test Circuit for Measuring Sine-wave Distortion and Minimum Frequency Response Figure 7. Test Circuit for Measuring RON Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Test Circuit (Continued) CIN RL nYn/nZ nZ/nYn VIS Vos RL Channel ON CIN nYn/nZ Channel OFF RL CL GND (a) Channel ON Condition nZ/nYn VIS CL Vos dB GND CIN nYn/nZ nZ/nYn VIS Vos RL RL Channel OFF dB CL GND (b) Channel OFF Condition Figure 9. Test Circuit for Measuring Switch Off Signal Feed-through Figure 10. Test Circuits for Measuring Crosstalk Between Any Two Switches/Multiplexers The crosstalk is defined as follows (oscilloscope output): V(p-p) VCC VCC 2RL nYn/nZ VCC VCC Sn or E 2RL 2RL RL nZ/nYn DUT VI DUT Pulse Generator 2RL CL Oscilloscope RT GND VO CL GND VEE VEE Figure 11. Test Circuit for Measuring Crosstalk Performance Oct. 2011 Open VIS Rev. 1. 1 Figure 12. Test Circuit for Measuring AC Between Control and Any Switch BCD Semiconductor Manufacturing Limited 10 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Performance Characteristics 80 70 VCC=5V,VEE=0V 75 65 VCC=10V 60 VEE=0V 70 RDSON (Ω) RDSON (Ω) 55 65 60 55 50 45 40 35 50 30 45 25 40 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 20 5.0 0 2 4 Signal Output (V) Figure 13. RDSON vs. Signal Output 10 8 10 Figure 14. RDSON vs. Signal Output 10 VCC=5V,VEE=0V VCC=10V,VEE=0V RL=10kΩ RL=10kΩ f=1kHz f=1kHz 1 THD+N (%) THD+N (%) 6 Signal Output (V) 1 0.1 0.1 0.01 0.01 0.1 1E-3 1 0.1 Figure 15. THD+N vs. Output Voltage Amplitude Oct. 2011 1 Output Voltage Amplitude Output Voltage Amplitude Figure 16. THD+N vs. Output Voltage Amplitude Rev. 1. 1 BCD Semiconductor Manufacturing Limited 11 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Performance Characteristics (Continued) 1 20 10 Signal Output Voltage (dBV) 0 Gain (dB ) -1 -2 -3 -4 0 -10 -30 -40 -50 -60 -70 -80 -90 -100 RL=10KΩ -110 10k 100k 1M 10M RL=10kΩ f=1kHz -20 VCC=2.5V, VEE=-2.5V -5 1k VCC=5V, VEE=0V -120 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 100M 0 10 20 Signal Input Voltage (dBV) Frequency (Hz) Figure 17. Frequency Response Figure 18. Linear Range 20 0 -10 VCC=10V, VEE=0V VCC=5V, VEE=0V RL=10kΩ f=1kHz VIS 1V/div -20 -30 -40 -50 -60 -70 -80 VOS 1V/div Signal Output Voltage (dBV) 10 -90 -100 -110 -120 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 10ns/div Signal Input Voltage (dBV) Figure 19. Linear Range Oct. 2011 Figure 20. Propagation Delay Rev. 1. 1 BCD Semiconductor Manufacturing Limited 12 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Performance Characteristics (Continued) 0 VOS 1V/div VCC=5V, VEE=0V -10 VCC=5V, VEE=0V -20 RL=10kΩ 2Y0 to 1Y0 1Y0 to 2Y0 -30 VIS 1V/div Crosstalk (dB) -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 100 1k 10k 100k Frequency (Hz) 10ns/div Figure 22. Crosstalk vs. Frequency Figure 21. Propagation Delay 0 -10 VCC=10V,VEE=0V -20 RL=10kΩ -30 2Y0 to 1Y0 1Y0 to 2Y0 Crosstalk (dB) -40 -50 VIS Output VI 50% GND -60 -70 tPLH -80 tPHL VOH -90 VOS Output -100 -110 -120 50% VOL -130 -140 100 1k 10k 100k Frequency (Hz) Figure 23. Crosstalk vs. Frequency Oct. 2011 Figure 24. Waveforms Showing the Input (VIS) to Output (VOS) Propagation Delays Rev. 1. 1 BCD Semiconductor Manufacturing Limited 13 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Performance Characteristics (Continued) Figure 25. Waveforms Showing the Turn-on and Turn-off Times (VM = 50 %, VI = GND to VCC) Figure 26. Input Pulse Definitions Oct. 2011 Amplitude VM VCC 50% tr and tf Fmax Pulse Width < 2ns Rev. 1. 1 Other 6ns BCD Semiconductor Manufacturing Limited 14 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Typical Application Figure 27. Typical Application of AZ4052 Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 15 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Mechanical Dimensions SOIC-16 1.350(0.053) 1.750(0.069) 7° 0.330(0.013) 0.510(0.020) Unit: mm(inch) 1.250(0.049) 1.650(0.065) 7° B A 20:1 0.250(0.010) 0.400(0.016) 9.800(0.386) 10.200(0.402) 0° 8° R0.200(0.008) R0.200(0.008) 0.050(0.002) 0.250(0.010) 0.170(0.007) 0.250(0.010) 5.800(0.228) 6.240(0.246) 3.800(0.150) 4.040(0.159) 9.5 ° 8° A 0.400(0.016)×45° 0.200(0.008) Sφ1.000(0.039) Depth 0.200(0.008) 8° 8° C-C 50:1 B 20:1 C 3° 7° 0.200(0.008) 0.250(0.010) 1.000(0.039) 1.270(0.050) BSC 1.270(0.050) C Note: Eject hole, oriented hole and mold mark is optional. Oct. 2011 Rev. 1. 1 BCD Semiconductor Manufacturing Limited 16 Preliminary Datasheet Dual 4-channel Analog Multiplexer/Demultiplexer AZ4052 Mechanical Dimensions (Continued) DIP-16 Oct. 2011 Rev. 1. 1 Unit: mm(inch) BCD Semiconductor Manufacturing Limited 17 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788