Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series : ZA Type : V High temperature Lead-Free reflow Features ● Endurance : 10000 h at 105 °C ● Low ESR and high ripple current (70 % over, Lower ESR than current V-FP) ● High voltage (to 80 V.DC) ● Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) is available upon request. (08 mm and larger) ● Vibration-proof product ● AEC-Q200 compliant ● RoHS compliant Specifications Size code C D D8 F G Category temp. range –55 °C to +105 °C Rated voltage range 25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC Nominal cap.range 10 µF to 33 µF 10 µF to 56 µF 22 µF to 100 µF 22 µF to 220 µF 33 µF to 330 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) DC leakage current I < 0.01 CV or 3 (µA) After 2 minutes (whichever is greater) Dissipation factor (tan d) Please see the attached standard products list 105 °C, 10000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after Endurance C D D8 F G (Ω/100 kHz) (–40 °C) 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf life capacitors shall meet the limits specified in Endurance. (With voltage treatment) 85 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value Resistance to soldering heat tan d Within the initial limit DC leakage current Within the initial limit Marking color : BLACK 0.3 max. Series identification L Pressure relief (010 and larger) (P) B±0.2 Capacitance (µF) H 0D±0.5 33 E ZA A±0.2 – Negative polarity marking (–) + (I) Example : 25 V.DC 33 µF (I) Dimensions (not to scale) K Marking W ( ) Reference size Rated voltage mark Lot number Rated voltage mark E V H 25 V.DC 35 V.DC 50 V.DC (Unit : mm) Size code J K 63 V.DC 80 V.DC D L A, B C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.5 1.8 1.8 3.1 4.6 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.70±0.2 0.70±0.2 · The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2016 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Standard products Endurance : 105 °C 10000 h Case size (mm) Rated Capacitance voltage (±20 %) (V.DC) (µF) 25 35 50 63 80 fD L Specification Size code Min. packaging q'ty Part number Ripple E.S.R. tan d current Standard (100 kHz) (120 Hz) (100 kHz) (+20 °C) Product (+20 °C) (+105 °C) (mΩ) (mA r.m.s.) 900 80 0.14 EEHZA1E330R Vibration-proof product Taping (pcs) 33 5 5.8 C – 1000 56 6.3 5.8 D 1300 50 0.14 EEHZA1E560P – 1000 100 220 330 6.3 8 10 7.7 10.2 10.2 D8 F G 2000 2300 2500 30 27 20 0.14 0.14 0.14 EEHZA1E101XP EEHZA1E221P EEHZA1E331P – EEHZA1E221V EEHZA1E331V 900 500 500 22 5 5.8 C 900 100 0.12 EEHZA1V220R – 1000 27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P – 1000 47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P – 1000 68 6.3 7.7 D8 2000 35 0.12 EEHZA1V680XP – 900 150 8 10.2 F 2300 27 0.12 EEHZA1V151P EEHZA1V151V 500 270 10 10.2 G 2500 20 0.12 EEHZA1V271P EEHZA1V271V 500 10 5 5.8 C 750 120 0.10 EEHZA1H100R – 1000 22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P – 1000 33 6.3 7.7 D8 1600 40 0.10 EEHZA1H330XP – 900 68 8 10.2 F 1800 30 0.10 EEHZA1H680P EEHZA1H680V 500 100 10 10.2 G 2000 28 0.10 EEHZA1H101P EEHZA1H101V 500 10 6.3 5.8 D 1000 120 0.08 EEHZA1J100P – 1000 22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP – 900 33 8 10.2 F 1700 40 0.08 EEHZA1J330P EEHZA1J330V 500 56 10 10.2 G 1800 30 0.08 EEHZA1J560P EEHZA1J560V 500 22 8 10.2 F 1550 45 0.08 EEHZA1K220P EEHZA1K220V 500 33 10 10.2 G 1700 36 0.08 EEHZA1K330P EEHZA1K330V 500 · Please refer to the page of “Reflow profile” and “The taping dimensions”. Frequency correction factor for ripple current Rated capacitance C < 47 µF 47 µF < C < 150 µF 150 µF < C Frequency Rated capacitance C < 47 µF 47 µF < C < 150 µF 150 µF < C Frequency Rated capacitance C < 47 µF 47 µF < C < 150 µF 150 µF < C Frequency Rated capacitance C < 47 µF 47 µF < C < 150 µF 150 µF < C Frequency Correction factor Correction factor Correction factor Correction factor 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 0.10 0.10 0.15 0.15 0.20 0.25 0.15 0.25 0.25 1 kHz < f < 2 kHz 0.30 0.40 0.45 10 kHz < f < 15 kHz 0.60 0.70 0.75 2 kHz < f < 3 kHz 0.40 0.45 0.50 3 kHz < f < 5 kHz 0.45 0.55 0.60 500 Hz < f < 1 kHz 0.20 0.30 0.30 5 kHz < f < 10 kHz 0.50 0.60 0.65 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.85 0.85 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz 0.80 0.85 1.00 0.85 0.90 1.00 0.85 0.90 1.00 500 kHz < f 1.05 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2016