140 CLH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, reflow solderable • High temperature, 1500 hours at 125 °C • High capacitance values • Charge and discharge proof, no peak current limitation Fig.1 Component outline • Lead (Pb)-free • ATTENTION: for maximum safe soldering conditions refer ° 140 CLH ° to fig.4 APPLICATIONS 150 CLZ 153 CLV 153 CRV lead (Pb)-free • SMD technology, for high mounting density • Industrial and professional applications • Automotive, general industrial • Smoothing, filtering, buffering QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (L x W x H in mm) 8 x 8 x 10 to 10 x 10 x 14 Rated capacitance range, CR 10 to 680 µF Tolerance on CR Rated voltage range, UR • Date code, in accordance with IEC 60062 6.3 to 63 V - 55 to + 125 °C Endurance test at 125 °C 1000 hours Useful life at 125 °C 1500 hours Useful life at 40 °C; 1.8 x lR applied 150 000 hours Shelf life at 0 V, 125 °C Based on sectional specification • Black mark or ‘−’ sign indicating the cathode (the anode is identified by bevelled edges) 1000 hours • Code indicating group number (H) PACKAGING IEC 60384-18/CECC 32300 Climatic category IEC 60068 • Rated capacitance (in µF) • Rated voltage (in V) ± 20 % Category temperature range MARKING 55/125/56 • Supplied in blister tape on reel SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (µF) 6.3 10 16 25 35 50 63 10 22 33 47 68 100 150 220 330 470 680 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 10 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - Document Number: 28303 Revision: 29-May-08 For technical questions, contact: [email protected] www.vishay.com 1 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE Lmax. Wmax. Hmax. ØD Bmax. S L1 max. MASS (g) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 0810 1010 1014 8.5 10.5 10.5 8.5 10.5 10.5 10.5 10.5 14.3 8.0 10.0 10.0 1.0 1.0 1.0 3.1 4.5 4.5 9.9 11.8 11.8 ≈ 1.0 ≈ 1.3 ≈ 1.5 0.4 ± 0.2 L D H WB C S C 0.3 max. Fig.2 Dimensional outline Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W 8 x 8 x 10 0810 16 10 x 10 x 10 1010 16 10 x 10 x 14 1014 16 Note 1. Detailed tape dimensions see section “PACKAGING”. TAPE THICKNESS T2 REEL DIA. PACKAGING QUANTITY PER REEL 11.3 11.3 14.8 380 380 330 500 500 250 24 24 24 MOUNTING The capacitors are designed for automatic placement on to printed-circuit boards. b Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print lay-out and/or adjacent components. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. SOLDERING Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad during processing. a c a Fig. 3 Recommended solder pad dimensions AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. TPad 280 (°C) 260 For maximum conditions refer to Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. 240 220 200 Table 3 180 160 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters 140 120 CASE CODE a b c 100 0810 1010 1014 3.5 4.3 4.3 2.5 2.5 2.5 3.0 4.0 4.0 80 www.vishay.com 2 0 50 100 150 200 t (s) 250 Fig. 4 Maximum temperature load during infrared reflow soldering measured on the soldering pad For technical questions, contact: [email protected] Document Number: 28303 Revision: 29-May-08 140 CLH Aluminum Capacitors SMD (Chip), High Temperature ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL2 tan δ Z Vishay BCcomponents DESCRIPTION rated capacitance at 100 Hz, tolerance ± 20 % rated RMS ripple current at 100 kHz, 125 °C max. leakage current after 2 minutes at UR max. dissipation factor at 100 Hz max. impedance at 100 kHz Electrolytic capacitor 140 CLH series 100 µF/50 V; ± 20 % Nominal case size: 10 x 10 x 14 mm; taped on reel Ordering code: MAL214095102E3 Former 12NC: 2222 140 95102 Note Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75 %. Table 4 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 IR 100 kHz 125 °C (mA) 180 300 430 180 300 430 180 430 180 300 180 255 317 145 205 255 145 145 145 205 255 NOMINAL CASE SIZE LxWxH (mm) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 CR (µF) 330 470 680 220 330 470 150 330 100 220 68 100 150 47 68 100 10 22 33 47 68 IL2 2 min (µA) tan δ 21 30 43 22 33 47 24 53 25 55 24 35 53 24 34 50 6.3 14 21 30 43 0.30 0.30 0.30 0.26 0.26 0.26 0.22 0.22 0.18 0.18 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Z 100 kHz + 20 °C (Ω) 0.65 0.17 0.12 0.65 0.17 0.12 0.65 0.12 0.65 0.19 0.65 0.40 0.30 1.00 0.56 0.42 1.00 1.00 1.00 0.56 0.42 ORDERING CODE MAL2140....... 95303E3 95301E3 95302E3 95403E3 95401E3 95402E3 95502E3 95501E3 95602E3 95601E3 95003E3 95001E3 95002E3 95103E3 95101E3 95102E3 95805E3 95803E3 95804E3 95801E3 95802E3 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods IEC 60384-18, subclause 4.14 Us ≤ 1.15 x UR Reverse voltage for short periods IEC 60384-18, subclause 4.16 Urev ≤ 0.5 V after 2 minutes at UR IL2 ≤ 0.01 x CR x UR Current Leakage current Inductance Equivalent series inductance (ESL) typ. 16 nH Resistance Equivalent series resistance (ESR) at 100 Hz Document Number: 28303 Revision: 29-May-08 calculated from tan δmax. and CR (see Table 4) For technical questions, contact: [email protected] ESR = tan δ/2 πf CR www.vishay.com 3 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents DISSIPATION FACTOR (tan δ) CAPACITANCE (C) 10 1.2 C C0 1 1.1 Tan Tan δ 2 1 1.0 2 0.9 1 Curve 1: 6.3 V Curve 2: 63 V 0.8 0.1 - 60 - 40 - 20 0 20 40 60 80 100 120 140 - 40 - 20 0 20 40 60 80 100 Tan δ0 = typical tan δ at 20 °C, 100 Hz Tamb (°C) C0 = capacitance at 20 °C, 100 Hz - 60 140 Tamb (°C) Fig.6 Typical multiplier of dissipation factor (Tan δ) as a function of ambient temperature Fig.5 Typical multiplier of capacitance as a function of frequency of ambient temperature EQUIVALENT SERIES RESISTANCE (ESR) 120 IMPEDANCE (Z) 103 10 ESR ESR 0 Z (Ω) Curve 1: 6.3 V Curve 2: 35 V Curve 3: 63 V 3 2 1 102 1 Case code 0810 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 4 3 2 1 10 1 2 3 1 10-1 0.1 10 2 10 10 3 10 4 ESR0 = typical at 20 °C, 100 Hz f (Hz) 10 5 10 10 2 10 3 10 4 10 5 Tamb (20 °C) Tamb (20 °C) Fig.8 Typical multiplier of ESR as a function of frequency Fig.7 Typical multiplier of ESR as a function of frequency 10 2 f (Hz) 10 2 Z (Ω ) Z (Ω ) 4 3 10 4 3 10 2 1 2 1 1 1 Case code 1010 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 0.1 Case code 1014 Curve 1: 10 V Curve 2: 25 V Curve 3: 50 V Curve 4: 63 V 0.1 0.01 0.01 10 10 10 3 10 4 f (Hz) 10 5 10 10 Tamb (20 °C) Fig.9 Typical impedance as a function of frequency www.vishay.com 4 10 3 10 4 f (Hz) 10 5 Tamb (20 °C) Fig.10 Typical impedance as a function of frequency For technical questions, contact: [email protected] Document Number: 28303 Revision: 29-May-08 140 CLH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE IA 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 lifetime multiplier 0 1. 2.8 1. 5 2.6 0 2. 3. 0 2.4 0 4. 0 6. 2.2 0 8. 12 2.0 20 1.8 30 0 10 0 Useful life at 125 °C and IR applied: (1) 0 (1) 1500 hours 40 IR = rated ripple current at 100 kHz, 125 °C 60 IA = actual ripple current at 100 kHz 20 1.6 1.4 1.2 1.0 0.8 0.5 0.0 40 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig.11 Multiplier of useful life as a function of ambient temperature and ripple current load. Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 300 1000 3000 10 000 30 000 100 000 Document Number: 28303 Revision: 29-May-08 IR MULTIPLIER UR = 6.3 to 25 V UR = 35 and 50 V UR = 63 V 0.60 0.70 0.80 0.85 0.90 0.95 0.97 1.00 0.45 0.60 0.75 0.85 0.90 0.95 0.97 1.00 0.40 0.55 0.70 0.85 0.90 0.95 0.97 1.00 For technical questions, contact: [email protected] www.vishay.com 5 140 CLH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Mounting PROCEDURE (quick reference) REFERENCE IEC 60384-18, shall be performed prior to tests mentioned below; ΔC/C: ± 5 % subclause 4.3 reflow soldering; tan δ ≤ spec. limit for maximum temperature load Endurance REQUIREMENTS refer to chapter “Mounting” IL2 ≤ spec. limit IEC 60384-18/ Tamb = 125 °C; UR applied; UR = 6.3 V; ΔC/C: ± 25 % CECC 32 300, 1000 hours UR ≥ 10 V; ΔC/C: ± 20 % subclause 4.15 tan δ ≤ 2 x spec. limit IL2 ≤ spec. limit Useful life CECC 30301, Tamb = 125 °C; UR and IR applied; ΔC/C: ± 50 % subclause 1.8.1 1500 hours tan δ ≤ 3 x spec. limit IL2 ≤ spec. limit no short or open circuit total failure percentage: ≤ 1 % Shelf life IEC 60384-18/ Tamb = 125 °C; no voltage applied; for requirements (storage at high CECC 32 300, 1000 hours see ‘Endurance test’ above temperature) subclause 4.17 Reverse voltage IEC 60384-18/ Tamb = 125 °C: ΔC/C: ± 15 % CECC 32 300, 125 hours at U = - 0.5 V, subclause 4.16 followed by 125 hours at UR tan δ ≤ 1.5 x spec. limit after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement www.vishay.com 6 For technical questions, contact: [email protected] IL2 ≤ spec. limit Document Number: 28303 Revision: 29-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1