4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP Part Number: AA4040SRC SUPER BRIGHT RED Features Description zSINGLE COLOR. The Super Bright Red source color devices are made zSUITABLE FOR ALL SMT ASSEMBLY AND with Gallium Aluminum Arsenide Red Light Emitting SOLDER PROCESS. zAVAILABLE ON TAPE AND REEL. zIDEAL FOR BACKLIGHTING. zPACKAGE : 500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1236 REV NO: V.7 DATE: APR/16/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201000474 Selection Guide Dice Part No. Lens Type SUPER BRIGHT RED (GaAlAs) AA4040SRC Iv (mcd) [2] @ 20mA WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 50 120 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1236 REV NO: V.7 DATE: APR/16/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201000474 Super Bright Red AA4040SRC SPEC NO: DSAD1236 REV NO: V.7 DATE: APR/16/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201000474 AA4040SRC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1236 REV NO: V.7 DATE: APR/16/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201000474 PACKING & LABEL SPECIFICATIONS AA4040SRC SPEC NO: DSAD1236 REV NO: V.7 DATE: APR/16/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201000474