Freescale MC8641THX1333JC Integrated host processor hardware specifications addendum for the mc8641xtxxnnnnxc sery Datasheet

Freescale Semiconductor
Technical Data
Document Number: MPC8641DECS01AD
Rev. 0, 12/2008
MPC8641 and MPC8641D
Integrated Host Processor
Hardware Specifications Addendum
for the MC8641xTxxnnnnxC Series
This document describes part-number-specific changes to
recommended operating conditions and revised electrical
specifications, as applicable, from those described in the
general MPC8641 and MPC8641D Integrated Host
Processor Hardware Specifications
(Document No. MPC8641DEC).
Specifications provided in this document supersede those in
the MPC8641 and MPC8641D Integrated Host Processor
Hardware Specifications, Rev. 1 or later, for the part
numbers listed in Table A only. Specifications not addressed
herein are unchanged.
Because this document is frequently updated, refer to the
website listed on the back page of this document or contact
your Freescale sales office for the latest version.
Note that headings and table numbers in this document are
not consecutively numbered. They are intended to
correspond to the heading or table affected in the general
hardware specification.
© Freescale Semiconductor, Inc., 2008. All rights reserved.
Freescale Part Numbers Affected:
MC8641DTHX1333JC
MC8641DTHX1250HC
MC8641DTHX1000NC
MC8641DTHX1000GC
MC8641THX1333JC
MC8641THX1250HC
MC8641THX1000NC
MC8641THX1000GC
MC8641DTVU1333JC
MC8641DTVU1250HC
MC8641DTVU1000NC
MC8641DTVU1000GC
MC8641TVU1333JC
MC8641TVU1250HC
MC8641TVU1000NC
MC8641TVU1000GC
General Parameters
Part numbers addressed in this document are listed in Table A.
Table A. Part Numbers Addressed by This Data Sheet
Operating Conditions
Freescale
Part Number
CPU
Frequency
(MHz)
VDD_Coren
Tj
(°C)
MC8641DTHX1333JC
1333
1.05 V ± 50 mV
–40 to 105
MC8641DTHX1250HC
1250
1.05 V ± 50 mV
MC8641DTHX1000NC
1000
0.95 V ± 50 mV
MC8641DTHX1000GC
1000
1.05 V ± 50 mV
MC8641THX1333JC
1333
1.05 V ± 50 mV
MC8641THX1250HC
1250
1.05 V ± 50 mV
MC8641THX1000NC
1000
0.95 V ± 50 mV
MC8641THX1000GC
1000
1.05 V ± 50 mV
MC8641DTVU1333JC
1333
1.05 V ± 50 mV
MC8641DTVU1250HC
1250
1.05 V ± 50 mV
MC8641DTVU1000NC
1000
0.95 V ± 50 mV
MC8641DTVU1000GC
1000
1.05 V ± 50 mV
MC8641TVU1333JC
1333
1.05 V ± 50 mV
MC8641TVU1250HC
1250
1.05 V ± 50 mV
MC8641TVU1000NC
1000
0.95 V ± 50 mV
MC8641TVU1000GC
1000
1.05 V ± 50 mV
2
Significant Differences from
Hardware Specification
Modified JTAG AC timing; extended junction
temperature range.
General Parameters
This section summarizes changes to the general parameters of the MPC8641 described in the MPC8641
and MPC8641D Integrated Host Processor Hardware Specifications.
• Modified JTAG AC timing
— tJTDVKH (min) = 15 ns
• Extended junction temperature range
— TJ = –40 to 105 °C
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
2
Freescale Semiconductor
General Parameters
2.1
Overall DC Electrical Characteristics
2.1.2
Recommended Operating Conditions
Table 2 provides the recommended operating conditions for the MPC8641 part numbers described herein.
Table 2. Recommended Operating Conditions
Characteristic
Symbol
Recommended
Value
Unit
Notes
TJ
–40 to 105
°C
—
Junction temperature range
11.2
JTAG AC Electrical Specifications
Table 44 provides the JTAG AC timing specifications for the MPC8641 part numbers described herein.
Table 44. JTAG AC Timing Specifications (Independent of SYSCLK) 1
Parameter
Symbol 2
Min
Max
tJTDVKH
tJTIVKH
15
0
—
—
Unit
Notes
ns
Input setup times:
Boundary-scan data
TMS, TDI
4
Notes:
1. All outputs are measured from the midpoint voltage of the falling/rising edge of tTCLK to the midpoint of the signal
in question. The output timings are measured at the pins. All output timings assume a purely resistive 50-Ω load
(see Figure 32). Time-of-flight delays must be added for trace lengths, vias, and connectors in the system.
2.The symbols used for timing specifications herein follow the pattern of t(first two letters of functional block)(signal)(state)
(reference)(state) for inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example,
tJTDVKH symbolizes JTAG device timing (JT) with respect to the time data input signals (D) reaching the valid state
(V) relative to the tJTG clock reference (K) going to the high (H) state or setup time. Also, tJTDXKH symbolizes JTAG
timing (JT) with respect to the time data input signals (D) went invalid (X) relative to the tJTG clock reference (K)
going to the high (H) state. Note that, in general, the clock reference symbol representation is based on three
letters representing the clock of a particular functional. For rise and fall times, the latter convention is used with
the appropriate letter: R (rise) or F (fall).
4. Non-JTAG signal input timing with respect to tTCLK.
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
Freescale Semiconductor
3
Ordering Information
21 Ordering Information
21.1
Part Numbers Fully Addressed by This Document
Table 74 provides the ordering information for the MPC8641 parts described in this document.
Table 74. Part Numbering Nomenclature
MC
nnnn
x
w
xx
nnnn
x
x
Product
Code
Part
Identifier
Core
Count
Temp
Package 1
Core Processor
Frequency 2
(MHz)
DDR speed
(MHz)
Product Revision Level
MC
8641
HX = High-lead
HCTE FC-CBGA
Blank =
Single
Core
Revision C = 2.1
T = –40
System Version Register
1000, 1250, 1333 J = 533 MHz
to 105 °C
Value for Rev C:
H = 500 MHz
VU = RoHS lead-free
0x8090_0021 - MPC8641
D = Dual
HCTE FC-CBGA
G = 400 MHz
0x8090_0121 - MPC8641D
Core
N = 500 MHz4
Notes:
1. See Section 16, “Package,” for more information on available package types.
2. Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this specification
support all core frequencies. Additionally, parts addressed by part number specifications may support other maximum core
frequencies.
3. The P prefix in a Freescale part number designates a “Pilot Production Prototype” as defined by Freescale SOP 3-13. These parts
have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization
from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product
changes may still occur while shipping pilot production prototypes.
4. Part Number MC8641xwxx1000NX is our low VDD_Coren device. VDD_Coren = 0.95 V and VDD_PLAT = 1.05 V.
Document Revision History
Table B provides a revision history for this hardware specification addendum.
Table B. Document Revision History
Rev.
Number
Date
0
12/2008
Substantive Change(s)
Initial release.
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
4
Freescale Semiconductor
Ordering Information
THIS PAGE INTENTIONALLY LEFT BLANK
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
Freescale Semiconductor
5
Ordering Information
THIS PAGE INTENTIONALLY LEFT BLANK
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
6
Freescale Semiconductor
Ordering Information
THIS PAGE INTENTIONALLY LEFT BLANK
MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC
Series, Rev. 0
Freescale Semiconductor
7
How to Reach Us:
Home Page:
www.freescale.com
Web Support:
http://www.freescale.com/support
USA/Europe or Locations Not Listed:
Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road
Tempe, Arizona 85284
1-800-521-6274 or
+1-480-768-2130
www.freescale.com/support
Europe, Middle East, and Africa:
Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
Japan:
Freescale Semiconductor Japan Ltd.
Headquarters
ARCO Tower 15F
1-8-1, Shimo-Meguro, Meguro-ku
Tokyo 153-0064
Japan
0120 191014 or
+81 3 5437 9125
[email protected]
under its patent rights nor the rights of others. Freescale Semiconductor products are
Asia/Pacific:
Freescale Semiconductor China Ltd.
Exchange Building 23F
No. 118 Jianguo Road
Chaoyang District
Beijing 100022
China
+86 10 5879 8000
[email protected]
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
For Literature Requests Only:
Freescale Semiconductor
Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800 441-2447 or
+1-303-675-2140
Fax: +1-303-675-2150
LDCForFreescaleSemiconductor
@hibbertgroup.com
Document Number: MPC8641DECS01AD
Rev. 0
12/2008
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
Freescale are trademarks or registered trademarks of Freescale
Semiconductor, Inc. in the U.S. and other countries. All other product or
service names are the property of their respective owners. The Power
Architecture and Power.org word marks and the Power and Power.org logos
and related marks are trademarks and service marks licensed by
Power.org.
© Freescale Semiconductor, Inc., 2008. All rights reserved.
Similar pages