Series I/Q Demodulator — 380 - 400 MHz EKIN2-390DX1 EKIN2-390DX1 E-Series I/Q Demodulator 380 - 400 MHz Features • • • SM-92 Package Excellent Phase and Amplitude Balance LO Power +10 dBm Typical Surface Mount Note: Non Hermetic Package Description M/A-COM’s EKIN2-390DX1 is a passive, surface mount I/Q Demodulator. Ideally suited for Direct Demodulation in PMR/ TETRA applications. Electrical Specifications @25°C Parameter Frequency Range LO / RF 380 - 400 I/Q DC - 1 Amplitude Unbalance Phase Unbalance Isolation Units Typical Minimum Maximum MHz MHz — — — — — — dB 0.5 — 1.0 Degrees 2.0 — 3.0 dB dB 55 42 40 40 — — dB 6.4 — 8.0 dBm +10 ± 1 — ±1 LO to RF LO to I/Q Conversion Loss (LO) Carrier Power V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. S 1376 C Series I/Q Demodulator — 380 - 400 MHz EKIN2-390DX1 Functional Configuration Absolute Maximum Ratings Parameter Absolute Maximum Function Pin No. Operating Temperature -10°C to +70°C LO 1 Storage Temperature -55°C to +100°C RF 8 Impedance 50 Ohms Nominal I 5 RF Power (1dB Compression) 4 dBm Max Q 6 External 50 Ohms — Case Ground 3,4,7 Not Connected 2 Typical Performance @ +25°C Phase Unbalance Amplitude Unbalance 0.40 2.5 2.4 0.38 2.3 2.2 dB Degrees 0.36 0.34 2.1 2.0 1.9 1.8 0.32 1.7 1.6 0.30 1.5 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Frequency (MHz) 0.3 0.4 0.5 0.6 0.7 0.8 0.9 V2.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. 1.0 Frequency (MHz) S 1376 C