Vishay MBR3035CT Dual common cathode schottky rectifier Datasheet

MBR30x5CT, MBRF30x5CT, MBRB30x5CT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
TO-220AB
FEATURES
ITO-220AB
• Power pack
• Guardring for overvoltage protection
• Low power loss, high efficiency
• Low forward voltage drop
• High forward surge capability
2
MBR30x5CT
3
MBRF30x5CT
1
PIN 1
PIN 2
PIN 1
PIN 3
CASE
PIN 3
1
2
3
PIN 2
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
TO-263AB
K
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
2
TYPICAL APPLICATIONS
1
MBRB30x5CT
PIN 1
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, and polarity protection application.
K
PIN 2
HEATSINK
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
PRIMARY CHARACTERISTICS
IF(AV)
2 x 15 A
VRRM
35 V to 45 V
IFSM
200 A
VF
0.60 V
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
TJ max.
150 °C
Package
TO-220AB, ITO-220AB, TO-263AB
Diode variations
Common cathode
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MBR3035CT
MBR3045CT
Maximum repetitive peak reverse voltage
VRRM
35
45
Working peak reverse voltage
VRWM
35
45
Maximum DC blocking voltage
VDC
35
45
Maximum average forward rectified current
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load per diode
IF(AV)
IFSM
15
200
Peak repetitive reverse current per diode at tp = 2.0 μs, 1 kHz
IRRM
2.0
dV/dt
10 000
TJ
- 65 to + 150
Storage temperature range
TSTG
- 65 to + 175
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
VAC
1500
Revision: 11-Jun-13
V
30
Voltage rate of change (rated VR)
Operating junction temperature range
UNIT
A
V/μs
°C
V
Document Number: 88677
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR30x5CT, MBRF30x5CT, MBRB30x5CT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VF (1)
Maximum instantaneous forward voltage per diode
Maximum instantaneous reverse current at DC blocking voltage
per diode
IR (1)
TEST CONDITIONS
VALUE
IF = 20 A
TC = 125°C
0.60
IF = 30 A
TC = 25°C
0.76
IF = 30 A
TC = 125°C
0.72
Rated VR
TJ = 25 °C
1.0
TJ = 125 °C
60
UNIT
V
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance per diode
SYMBOL
MBR
MBRF
MBRB
UNIT
RJC
1.5
4.5
1.5
°C/W
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
TO-220AB
MBR3045CT-E3/45
PREFERRED P/N
1.85
45
50/tube
DELIVERY MODE
Tube
ITO-220AB
MBRF3045CT-E3/45
1.99
45
50/tube
Tube
TO-263AB
MBRB3045CT-E3/45
1.35
45
50/tube
Tube
TO-263AB
MBRB3045CT-E3/81
1.35
81
800/reel
Tape and reel
TO-220AB
MBR3045CTHE3/45 (1)
1.85
45
50/tube
Tube
ITO-220AB
MBRF3045CTHE3/45 (1)
1.99
45
50/tube
Tube
TO-263AB
MBRB3045CTHE3/45 (1)
1.35
45
50/tube
Tube
TO-263AB
MBRB3045CTHE3/81 (1)
1.35
81
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified
Revision: 11-Jun-13
Document Number: 88677
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR30x5CT, MBRF30x5CT, MBRB30x5CT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
30
Instantaneous Reverse Current (mA)
100
Average Forward Current (A)
Resistive or Inductive Load
24
18
12
6
TJ = 125 °C
1.0
TJ = 75 °C
0.1
0.01
TJ = 25 °C
0.001
0
50
0
150
100
0
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics Per Diode
300
10 000
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
250
Junction Capacitance (pF)
Peak Forward Surge Current (A)
10
200
150
100
50
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
100
0
1
0.1
100
10
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
TJ = 150 °C
10
1.0
TJ = 25 °C
0.1
0.01
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
10
1
0.1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
Revision: 11-Jun-13
Document Number: 88677
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MBR30x5CT, MBRF30x5CT, MBRB30x5CT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
ITO-220AB
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
2
0.603 (15.32)
0.573 (14.55)
0.635 (16.13)
0.625 (15.87)
0.160 (4.06)
0.140 (3.56)
0.105 (2.67)
0.095 (2.41)
0.104 (2.65)
0.096 (2.45)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.191 (4.85)
0.171 (4.35)
0.035 (0.89)
0.025 (0.64)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
K
2
0.624 (15.85)
0.591 (15.00)
Revision: 11-Jun-13
0.055 (1.40)
0.047 (1.19)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
K
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
TO-263AB
0.245 (6.22)
MIN.
3
0.057 (1.45)
0.045 (1.14)
0.022 (0.56)
0.014 (0.36)
0.190 (4.83)
0.160 (4.06)
2
7° REF.
0.350 (8.89)
0.330 (8.38)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.411 (10.45)
0.380 (9.65)
0.671 (17.04)
0.651 (16.54)
PIN
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.560 (14.22)
0.530 (13.46)
0.205 (5.20)
0.195 (4.95)
7° REF.
0.076 (1.93) REF.
45° REF.
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
3
0.190 (4.83)
0.170 (4.32)
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Document Number: 88677
4
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
MBRB3045CT VS-MBRB3045CTTRLP MBR3035CT-E3/45 MBR3045CT/45 MBR3045CT-E3/45 MBR3045CTE3/4W MBR3045CTHE3/45 MBRB3035CT/45 MBRB3035CT/81 MBRB3035CT-E3/45 MBRB3035CT-E3/81
MBRB3035CTHE3/45 MBRB3035CTHE3/81 MBRB3045CT/31 MBRB3045CT/45 MBRB3045CT/81 MBRB3045CTE3/31 MBRB3045CT-E3/45 MBRB3045CT-E3/81 MBRB3045CTHE3/45 MBRB3045CTHE3/81 MBRF3035CT-E3/45
MBRF3035CTHE3/45 MBRB3045CTTRL MBRB3045CTTRR VS-MBRB3045CTTRRP
Similar pages