www.make-ps.com E-mail:[email protected] Single & Dual Output DC/DC Converter Series FKC08 FEATURES: 8Watt | DC-DC Converter ●2:1Wide Input Voltage. ●8 Watt 24PIN DIL Package. ●Efficiency To 82% ●PI Input Filter. ●1600Vdc Isolation ●MTBF:>1,500,000 hrs ●Operating Temperature:-40℃ TO +100℃ APPLICATIONS: ● Wireless Network ● Telecom/Datacom ● Industry Control System ● Measurement Equipment ● Semiconductor Equipment MODEL SELECTION CHART Input Voltage Vdc Part Number 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 FKC08-05S12 FKC08-05S15 FKC08-05D12 FKC08-05D15 FKC08-12S03 FKC08-12S05 FKC08-12S12 FKC08-12S15 FKC08-12D05 FKC08-12D12 FKC08-12D15 FKC08-24S03 FKC08-24S05 FKC08-24S12 FKC08-24S15 FKC08-24D05 FKC08-24D12 FKC08-24D15 FKC08-48S03 FKC08-48S05 FKC08-48S12 FKC08-48S15 FKC08-48D05 FKC08-48D12 Output Voltage Vdc Input Current No-Load (mA TYP) 25 25 25 25 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Full Load (mA TYP) Output Current Efficiency Full Load (mA) %TYP 12 15 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 1927 1927 1927 1927 784 784 784 784 784 784 784 392 392 392 392 392 392 392 196 196 196 196 196 196 83 83 83 83 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 666 533 ±333 ±266 2424 1600 666 533 ±800 ±333 ±267 2424 1600 666 533 ±800 ±333 ±267 2424 1600 666 533 ±800 ±333 FKC08-05S12/*** add Suffix SMD for SMD package NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Temperature Derating Graph Tolerance Envelope Graph Tolerance Envelope 100 75 50 Nature Convection 110% 100% 90% 80% 1/3 120% 90% 80% 70% 60% 50% Output Current(%) 110% 85 100 Ambient Temperature(℃) 100% 75 40% 10% -40 20% 70% 0 30% 25 Graph 120% Output Voltage(%) OutPut Power(%) Temperature Derating Graph www.make-ps.com E-mail:[email protected] Input Specifications Conditions Parameters Voltage Types Filter Min Typ Max 2:1 Units Min Typ Max ±2 Units % ±0.5 ±0.5 ±1.0 100 % % % mVp-p us Max Units MΩ KHz ℃ % Pi TYPE Output Specifications Parameters Voltage Tolerance Conditions Short Circuit Protection Continuous Line Regulation Load Regulation Load Regulation Ripple & Noise Transient response setting time Single (F.L To 10% Load) Dual (F.L To 1/4 Load) BW=DC To 20MHz 50% load step change 350 General Specifications Parameters Isolation Resistance Switching Frequency Conditions 500Vdc Min 1000 400 -40 Operating Temperature Humidity Cooling Case material Weight Dimensions Potting Material Radiated Emissions Radiated Emissions Typ Non Condensing Free air Convection 100 95 Nickel Coated With Non-Conductive Base 16.2 31.6x20.1x10.0 Epoxy (UL94V-0 rated) CLASS A CLASS A EN55022 FCC 47 CFR Part 15 subpart A Suggest adding input external filter(C1,C2,L)to meet conducted emissions (En55022 class A) 12uH C1 2.2uF/100V +Vout +Vin L DC/DC Converter C2 2.2uF/100V -Vout -Vin Load Part Number Recommended Test Circuit Vin +Vout Cin Single Cout GND 100uF/25V -Vout 5V & 12V :Cin 100uF,25V 24V & 48V:Cin 10uF,100V Vin 100uF/25V Cin GND Dual Cout Cout 100uF/25V 12V :Cin 100uF,25V 24V & 48V:Cin 10uF,100V 2/3 +Vout COM -Vout g mm www.make-ps.com E-mail:[email protected] OUTLINE DRAWING Package Style and Pinning (mm) 31.80 20.30 10.20 3.8 2 5.10 20.30 2.54 DIP24 Package Style 15.20 Pin Connections Pin # 1 2 3 9 11 14 16 22 23 0.25 x 0.50 Rectangular Pin 9 11 16 14 1 2 3 Bottom View 23 22 Single ON/OFF -Vin -Vin NC NC +Vout -Vout +Vin +Vin Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC = No Connection Pin Pitch Tolerance ±0.35 mm SMD Package Style 32.00 20.30 31.40 SMD Package Style 11.20 2.54 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. 10.90 3.81 21.30 6.35 Pin Connections 25.40 Pin area 0.1 x 0.50 2.54 0.50 1.60 2.40 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.54 24.14 24 23 22 21 20 11 x 2.54 16 15 14 13 Top View 1 Pin # Single 1 ON/OFF 2 -Vin 3 -Vin 9 NC 11 NC 14 +Vout 16 -Vout 22 +Vin 23 +Vin Others NC NC = No Connection Dual ON/OFF -Vin -Vin Com -Vout +Vout Com +Vin +Vin NC Pin Pitch Tolerance ±0.35 mm 27.94 All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across output is recommended for operation. Make Power world-class design, development and manufacturing team stands ready to work with you to deliver the exact power converter you need for your ready to work with you to deliver the exact power converter you need for your demanding, large volume, OEM applications. And ... we ll do it on time and within budget Our experienced applications and design staffs; quick-turn prototype capability; highly automated, SMT assembly facilities; and in-line SPC quality-control techniques combine to give us the unique ability to design and deliver any quantity of power converters to the highest standards of quality and reliability. We have compiled a large library of DC/DC designs that are currently used in a variety of telecom, medical, computer, railway, aerospace and industrial applications. We may already have the converter you need. Contact us. Our goal is to provide you the highest-quality, most cost-effective power converters available. CUSTOM CAPABILITIES 3/3