PXO C1310 Typical Applications Features Base Stations Test Equipment Synthesizers Surface Mount Package Reflow Process Compatible AT-Cut Crystal SONET Minimum Clock Specification Previous Vectron Model Numbers SPO50, 9140 Frequency range 8 MHz – 700 MHz Standard frequencies 10; 24.705; 30.720; 32.768; 50; 68.768 MHz; 77.76 MHz; 155.52; 622,08 MHz Frequency stabilities1 [Standard] Parameter vs. operating temperature range (Referenced to +25°C) Parameter Initial tolerance vs. supply voltage change vs. load change vs. aging /1. Year vs. aging / year (followingYears) Min Typ -10.0 Min -5.0 -1.0 -1.0 -3.0 -1.0 Typ Max. 5 Units Operating temp range Ordering Code +10.0 ppm -20 … +70°C D105 Max. +5.0 +1.0 +1.0 +3.0 +1.0 Units ppm ppm ppm ppm ppm Condition VS ± 5% Load ± 5% Frequency stabilities1 [meets SONET Minimum Clock Specification - Option] Parameter vs. operating temperature range Parameter overall tolerance 5 Min Typ Max. Units Operating temp range Ordering Code -20 … +70°C D205 Condition ( 15 Years aging, temp, initial, supply, load ) Min -20.0 Typ Max. +20.0 Units ppm Min 4.75 Typ 5.0 Max. 5.25 Units VDC Current consumption 40 mA @ HCMOS < 155 MHz Current consumption 90 mA @ PECL < 155 MHz 3.465 VDC Current consumption 30 mA @ LVHCMOS< 155 MHz Current consumption 80 mA @ LVPECL< 155 MHz Current consumption 25 mA @ LVDS< 155 MHz Supply voltage Parameter Supply voltage (Vs) Supply voltage (Vs) 3.135 3.3 Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Condition 5 Ordering Code SV050 SV033 v.2005-11-09 · page 1 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax PXO C1310 RF output Parameter Signal Min Typ HCMOS Load Max. Units 15.0 Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle Signal Load Rise and Fall time Duty cycle 40 pF ns % @ 15 pF 10 to 90 % @ Vs/2 1 55 Ω ns % Vs - 2V 20 to 80 % 1 60 Ω ns % RFP LVDS 100 40 Ordering Code RFH 5 60 PECL 50 45 5 Condition RFL 10 to 90 % Additional parameters Parameter Phase Noise Min Jitter Weight Processing & Packing Typ -75 Max. Units dBc/Hz Condition 10 Hz @155 MHz -110 dBc/Hz -135 dBc/Hz 1 kHz -142 dBc/Hz 10 kHz -142 dBc/Hz 100 kHz 1 ps RMS g 2 100 Hz PECL 3,3V @ 10 kHz to 20 MHz handling&processing note Enclosures Type G223A for HCMOS and LVHCMOS Version Package Codes: Code A1 Height “H” 5,9 Pin Length “L” NA Type G218B for PECL; LVPECL and LVDS Version Code B1 Dimensions: mm Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Pin Length “L” NA Dimensions: mm Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Height “H” 5,9 v.2005-11-09 · page 2 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax PXO C1310 1 2 3 4 Pin Connections NC / Enable (optional) Ground (Case) RF Output Supply Voltage Input (Vs) 1 2 3 4 5 6 Outline Drawing: G223B Pin Connections N/C N/C / Enable (optional) Ground (Case) RF Output Complementary RF Output Supply Voltage Input (Vs) Outline Drawing: G218B Marking C1310A1-xxxx frequency * VI AYYWW Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -30 -40 Typ Max. 7 Units V +80 +90 °C °C Condition Typical Phase Noise and Jitter (52 MHz; HCMOS output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz Sφ(f) [dB] -77dB -91dB -80dB (155,52 MHz; PECL output) Jitter [ps rms] 0.432ps 0.086ps 0.306ps Frequency range [Hz] 500Hz to 1.5MHz 65kHZ to 1.5MHz 12kHz to 20MHz Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax Sφ(f) [dB] -73.96dB -75.87dB -65.34dB Jitter [ps rms] 0.205ps 0.165ps 0.553ps v.2005-11-09 · page 3 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax PXO C1310 Typical Phase Noise and Jitter (122,88MHz; LVDS output) Frequency range [Hz] 100Hz to 1.5MHz 50kHZ to 1.5MHz 12kHz to 20MHz (622,08MHz; PECL output) Jitter [ps rms] 0.230ps 0.082ps 0.230ps Sφ(f) [dB] -75dB -84dB -75dB Frequency range [Hz] 1kHz to 5MHz 250kHZ to 5MHz 12kHz to 20MHz Jitter [ps rms] 0.113ps 0.100ps 0.204ps Sφ(f) [dB] -67.09dB -68.18dB -61.95dB Typical frequency stability vs temp 10 5 df / ppm 0 -5 -10 -15 -45 -25 -5 15 35 55 75 Temp. / °C Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] G218B / G223B 24 Quantity per meter 83,3 Quantity per reel 850 Dimension P 12 Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2005-11-09 · page 4 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax PXO C1310 Recommended Reflow Profile Pb-Free Assembly /Sn-Pb Assembly Profile Feature Pb-Free Assembly /Sn-Pb Assembly Profile Feature Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. Preheat -Temperature Min Tsmin) -Temperature Min Tsmax) -Time (min to max) (ts) 150°c 200°c 60-180 seconds Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Tsmax to TL - Ramp-up Rate 3°C/second max. Time maintainted above - Temperature (TL) - Time (tL) 217°C 60-150 seconds Peak Temperature (Tp) max 260°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-down Rate 6°C/second max. Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow process. How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Stability Code Supply Voltage Code RF Output Code Package Code RFH A1 C1310 Example: Step 2 C1310 D105 SV050 The factory representative will then respond with a Vectron Model Number in the following Configuration: Model Package Code Dash Dash Number C1310 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N = C1310A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. Vectron International · www.vectron.com Vectron International Headquarters 267 Lowell Road Hudson, New Hampshire 03051 +1-888-328-7661 tel +1-888-329-8328 fax Vectron International LLC. 100 Watts Street Mount Holly Springs, PA 17065 USA +1-717-486-3411 tel +1-717-486-5920 fax v.2005-11-09 · page 5 of 5 Vectron international GmbH & Co. KG Landstrasse D-74924 Neckarbischofsheim Germany +49-07268-801-0 tel +49-07268-801-281 fax Vectron Asia Pacific Sales Office 1F-2F, No 8 Workshop, No 308 Fenju Road, WaiGaoQiao Free Trade Zone, Pudong, Shanghai, P.R. China 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax