Vishay MURS340S Surface mount ultrafast plastic rectifier Datasheet

New Product
MURS340S & MURS360S
Vishay General Semiconductor
Surface Mount Ultrafast Plastic Rectifier
FEATURES
• Glass passivated chip junction
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 260 °C
• Solder dip 260 °C, 40 s
DO-214AA (SMB)
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectification and
freewheeling application in switching mode converters
and inverters for consumer, computer and
telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
3.0 A
VRRM
400 V, 600 V
IFSM
35 A
trr
50 ns
VF at IF = 3.0 A
1.20 V
TJ max.
175 °C
MECHANICAL DATA
Case: DO-214AA (SMB)
Epoxy meets UL 94 V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC-Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking codes
Maximum repetitive peak reverse voltage
VRRM
(1)
Maximum average forward rectified current
TM = 130 °C
TA = 25 °C (2)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
Operating junction and storage temperature range
MURS340S
MURS360S
3GS
3JS
400
600
UNIT
V
IF(AV)
3.0
1.5
A
IFSM
35
A
TJ, TSTG
- 65 to + 175
°C
Notes:
(1) Units mounted on P.C.B. with 8 mm x 8 mm, 1 oz. copper pad areas (Fig. 1)
(2) Free air, mounted on recommended copper pad area (Fig. 2)
Document Number: 89110
Revision: 14-Apr-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
New Product
MURS340S & MURS360S
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
MURS340S
MURS360S
UNIT
Maximum instantaneous forward
voltage (1)
IF = 3.0 A
TJ = 25 °C
TJ = 150 °C
VF
1.45
1.20
V
Maximum instantaneous reverse
current (2)
Rated VR
TJ = 25 °C
TJ = 150 °C
IR
5.0
150
µA
Maximum reverse recovery time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
trr
50
ns
Maximum reverse recovery time
IF = 1.0 A, dI/dt = 50 A/µs,
VR = 30 V, Irr = 10 % IRM
trr
75
ns
Notes:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MURS340S
MURS360S
UNIT
resistance (1)
RθJM
12
°C/W
Typical thermal resistance (2)
RθJA
120
°C/W
Typical thermal
Notes:
(1) Units mounted on P.C.B. with 8 mm x 8 mm, 1 oz. copper pad areas. Thermal resistance RθJM - junction to mount
(2) Free air, mounted on recommended copper pad area. Thermal resistance RθJA - junction to ambient
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
MURS360S-E3/52T
0.093
52T
750
7" diameter plastic tape and reel
MURS360S-E3/5BT
0.093
5BT
3200
13" diameter plastic tape and reel
MURS360SHE3/52T (1)
0.093
52T
750
7" diameter plastic tape and reel
MURS360SHE3/5BT (1)
0.093
5BT
3200
13" diameter plastic tape and reel
Note:
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1.6
Average Forward Current (A)
Average Forward Rectified Current (A)
3.0
2.0
1.0
Units Mounted on P.C.B. with 8 mm x 8 mm,
1 oz. Copper Pad Areas.
TM Measured at Mount of Terminal
1.4
1.2
1.0
0.8
0.6
0.4
Mounted on P.C.B. with
Recommended Copper Pad Areas
0.2
0
0
0
25
50
75
100
125
150
175
0
25
50
75
100
125
150
TM - Mount Temperature (°C)
TA - Ambient Temperature (°C)
Figure 1. Forward Current Derating Curve
Figure 2. Forward Current Derating Curve
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
175
Document Number: 89110
Revision: 14-Apr-09
New Product
MURS340S & MURS360S
Vishay General Semiconductor
4.4
1000
Average Power Loss (W)
Instantaneous Reverse Current (µA)
D = 0.8
4.0
D = 0.3 D = 0.5
3.6
D = 0.2
3.2
2.8
D = 0.1
2.4
D = 1.0
2.0
1.6
T
1.2
0.8
D = tp/T
0.4
tp
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
TA = 25 °C
0.1
0.01
0
0
0.5
1.0
1.5
2.0
2.5
3.0
10
3.5
20
30
40
50
60
70
80
90
Average Forward Current (A)
Percent of Rated Peak Reverse Voltage (%)
Figure 3. Forward Power Loss Characteristics
Figure 5. Typical Reverse Characteristics
100
100
100
10
Junction Capacitance (pF)
Instantaneous Forward Current (A)
TA = 175 °C
100
TA = 175 °C
TA = 150 °C
1
TA = 100 °C
TA = 125 °C
0.1
TA = 25 °C
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
0.01
0
0.4
0.8
1.2
1.6
1
0.1
2.0
Instantaneous Forward Voltage (V)
1
10
100
Reverse Voltage (V)
Figure 4. Typical Instantaneous Forward Characteristics
Figure 6. Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-214AA (SMB)
Cathode Band
Mounting Pad Layout
0.085 (2.159) MAX.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.086 (2.18) MIN.
0.180 (4.57)
0.160 (4.06)
0.060 (1.52) MIN.
0.012 (0.305)
0.006 (0.152)
0.220 REF.
0.096 (2.44)
0.084 (2.13)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.220 (5.59)
0.205 (5.21)
Document Number: 89110
Revision: 14-Apr-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages