CHENMKO ENTERPRISE CO.,LTD CHIMD14PT SURFACE MOUNT Dual Digital Transistor VOLTAGE 50 Volts CURRENT 500 mAmpere APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-74/SOT-457) * High current gain. * Suitable for high packing density. * * * * SC-74/SOT-457 Low colloector-emitter saturation. High saturation current capability. Two 500mA digital transistor chips in one package. Built in bias resistor(R1=220Ω, Typ. ) (1) (6) 0.95 1.7~2.1 2.7~3.1 0.95 (3) (4) 0.25~0.5 MARKING 1.4~1.8 *ID14 0.935~1.3 0.08~0.2 0~0.15 0.3~0.6 CIRCUIT 4 6 R1 R2 2.6~3.0 R2 R1 3 1 SC-74/SOT-457 Dimensions in millimeters PNP DIGITAL TRANSISTOR LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − -50 V VIN Input voltage -5 +5 V − -500 − -500 − 150 −55 +150 IO DC Output current IC(Max.) PTOT Total power dissipation TSTG Storage temperature Note Transistor mounted on an FR4 printed-circuit board. Tamb ≤ 25 OC, Note 1 mA mW O C NPN DIGITAL TRANSISTOR LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − 50 V VIN Input voltage -5 +5 V − 500 − 500 − 150 mW −55 +150 O IO DC Output current IC(Max.) PTOT Total power dissipation TSTG Storage temperature Tamb ≤ 25 OC, Note 1 mA C Note Transistor mounted on an FR4 printed-circuit board. PNP DIGITAL TRANSISTOR CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VIoff) Input off voltage IO=-100mA; VCC=-5.0V -0.3 − − V VI(on) Input on voltage IO=-50mA; VO=-0.3V − − -1.1 V VO(on) Output voltage IO=-100mA; II=-5mA -0.3 V Input current VI=-3.0V − − − II − -17 mA IC(off) Output current VI=0V; VCC=-50V − − -0.5 uA hFE DC current gain IO=-5.0mA; VO=-100V 82 − − R1 Input resistor 154 220 286 R2/R1 Resistor ratio 36.3 45.5 54.6 Ω NPN DIGITAL TRANSISTOR CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT 0.3 − − V IO=50mA; VO=0.3V − − 1.1 V IO=100mA; II=5mA − − 0.3 V Input current VI=3.0V − − 17 mA IC(off) Output current VI=0V; VCC=50V − − 0.5 mA hFE DC current gain IO=5mA; VO=100V 82 − − R1 Input resistor 154 220 286 R 2/R1 Resistor ratio 36.3 45.5 54.6 VIoff) Input off voltage IO=100mA; VCC=5.0V VI(on) Input on voltage VO(on) Output voltage II Ω