Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2014 IGS-9084GP-FB2 Series IGS-9084GP-FB2 Series Features Industrial Ethernet Switch 1 Industrial 12-port managed Gigabit bypass Ethernet switch with 8x10/100/1000Base-T(X) and 4x100/1000Base-X, SFP socket, LC connector bypass ▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Support IEEE 1588v2 clock Synchronization ▪ Supports IPV6 new internet protocol version ▪ Support Modbus TCP protocol ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Support IEEE 802.3az Energy-Efficient Ethernet technology ▪ Supports SMTP client ▪ Supports IP-based bandwidth management ▪ Supports application-based QoS management ▪ Supports Device Binding security function ▪ Supports DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support ACL, TACACS+ and 802.1x User Authentication for security ▪ Supports 9.6K Bytes Jumbo Frame ▪ Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection ▪ Bypass switching time < 10ms and throughput not affected and no extra delay ▪ Multiple notification for warning of unexpected event ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled ▪ Supports backup unit device DBU-01 to quickly configuration backup/restore Introduction IGS-9084GP-FB2 Series is managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports and provided 4xLC connector optical bypass function. These fiber optical bypass switch protect the network from failures and Network maintenance by ensuring network integrity during power loss. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 75°C. IGS-9084GP-FB2 Series can also be managed centralized and convenient by OpenVision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application. *NOTE: This function is available by request only 1-156 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2014 edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant Industrial Ethernet Switch ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost- Industrial Media Converter technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. effectiveness in one set of network redundancy topology. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. Industrial Device Server ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in Industrial Wireless Access Point to TCP/UDP port number. short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS ▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. Industrial Cellular VPN Router attack immediately and completely. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking more. Industrial M2M Gateway standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or Accessories Network Management Software *NOTE: This function is available by request only D esign ed for R u gged E xcellence 1-157 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2014 Tunnel Application Traffic Information Display System TUNNEL 60km IP Camera TUNNEL 1 Sensor IP Camera Industrial Ethernet Switch Sensor IP Camera Sensor ! IGS-9084GP-FB2 IGS-9084GP-FB2 X Power failed bypass IGS-9084GP-FB2 Network connection Control Center Optical Bypas Operation 1-158 Normal mode: The Bypass switch diver the data from the Network ports data to Bypass mode: The Network data traffic routed directly to the other Network port. And the Monitor ports the Monitor data traffic routed directly to the other Monitor port. w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2014 ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Industrial Ethernet Switch Open-Vision Industrial Media Converter Host Monitor Industrial Device Server Commander Industrial Wireless Access Point Industrial Cellular VPN Router Topology View Industrial M2M Gateway Dimensions Accessories Network Management Software (Unit=mm) D esign ed for R u gged E xcellence 1-159 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2014 Specifications ORing Switch Model IGS-9084GP-FB2-SS IGS-9084GP-FB2-MM Physical Ports Industrial Ethernet Switch 1 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 8 100/1000Base-X SFP Port 4 LC Bypass Port Type Single-Mode Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table 8K Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency : 7 μs Switching bandwidth : 24Gbps Max. Number of Available VLANs : 4095 VLAN ID Range : 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Jumbo frame Up to 9.6K Bytes Security Features Software Features Network Redundancy RS-232 Serial Console Port Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP O-Ring Open-Ring O-Chain MRP*NOTE MSTP (RSTP/STP compatible) RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 Switch LED indicators Power Indicator (PWR/1/2) Green : Power LED x 3 R.M. indicator (R.M.) Green : indicate system operated in O-Ring Master mode Ring indicator (Ring) Green : indicate system operated in O-Ring mode Fault indicator (Fault) Amber : Indicates unexpected event occurred 10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator. Amber for duplex indicator *NOTE: This function is available by request only 1-160 w w w.oring - net wo rk in g.co m Multi-Mode Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Green for port Link/Act. Industrial Ethernet Switch 100/1000Base-X SFP Port Indicator v1.0a Jun, 2014 Fault Contact Relay Relay output to carry capacity of 1A at 24VDC Power Dual DC inputs. 12~48 VDC on 6-pin terminal block Power Consumption (Typ.) 13 Watts Overload Current Protection Present Industrial Media Converter Redundant Input Power Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm(3.8 x 4.15 x 6.06 inch) Weight (g) 1205 g Environmental -40 to 85°C (-40 to 185°F) Operating Temperature -40 to 75°C (-40 to 167°F) Operating Humidity 5% to 95% Non-condensing Industrial Device Server Storage Temperature Regulatory Approvals FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years Industrial Wireless Access Point EMI Industrial Cellular VPN Router Ordering Information I G S -9 A A B CC -FB 2 -DD -LC Option 10/100/1000Base-T(X) Port Number - 08: 8 ports Model Name - 4: 4 ports Additional Port Type Fiber Optical Mode -GP: Gigabit SFP ports -MM: Multi-mode -SS: Single-mode Description IGS-9084GP-FB2-MM-LC Industrial 12-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) and 4x100/1000Base-X, SFP socket IGS-9084GP-FB2-SS-LC Industrial 12-port managed Gigabit bypass Ethernet switch with 8x10/100/1000Base-T(X) and 4x100/1000Base-X, SFP socket, single-mode LC connector bypass Optional Accessories (Can be purchased separately) ‧Open-Vision M500, Powerful Network Management Windows Utility Suite, 500 IP devices ‧SFP100 series, 100Mbps SFP optical transceiver ‧SFP1G series, 1Gbps SFP optical transceiver ‧DR-45 series, 45W DIN-Rail power supply ‧DR-75 series, 75W DIN-Rail power supply ‧DR-120 series, 120W DIN-Rail power supply ‧DBU-01 : Data backup unit device D esign ed for R u gged E xcellence Network Management Software Packing List ‧IGS-9084GP ‧DIN-Rail Kit ‧Wall-mount Kit ‧Console Cable ‧ORing Tool CD ‧Quick Installation Guide Accessories Available Model Additional Port Number Industrial M2M Gateway Code Definition 1-161